{"title":"SHAPE Flash Sale","description":"\u003cp\u003eSave 20% on selected SHAPE products for a limited time. Prices shown already include the discount.\u003c\/p\u003e","products":[{"product_id":"shape-40-inch-c-stand-turtle-base-kit","title":"SHAPE 40-inch C-Stand Turtle Base Kit","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 40-inch C-Stand Turtle Base Kit is a black anodized aluminum support stand for photographers, filmmakers, studios, and grip crews who need a 9.7 ft working height and 25 lb load capacity. Available in Canada from Filmgear Canada, the kit includes a removable turtle base, grip heads, a 40-inch arm, cable clips, and removable rubber feet.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThis camera C-Stand combines a 55-inch minimum and folded height with a maximum height of 9.7 ft \/ 296 cm. The removable turtle base accepts an optional 2K pin for low-angle setups, while the top of the stand supports 5\/8-inch baby-pin accessories. A sliding leg helps the stand adapt to uneven surfaces, and the legs nest with other C-stands to reduce floor space during transport and storage. Damped spring risers, captive knobs, and aluminum locking collars improve daily grip workflow.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003e25 lb support capacity\u003c\/h3\u003e\u003cp\u003eThe stand supports up to 25 lb \/ 11 kg for flags, silks, bounce cards, small fixtures, and other grip accessories within the rated load.\u003c\/p\u003e\u003ch3\u003e9.7 ft maximum height\u003c\/h3\u003e\u003cp\u003eThe three-section stand reaches 9.7 ft \/ 296 cm and folds to 55 inches \/ 140 cm. That range supports overhead diffusion, flags, and elevated accessory placement on studio or location sets.\u003c\/p\u003e\u003ch3\u003eRemovable turtle base\u003c\/h3\u003e\u003cp\u003eThe turtle base can be removed and used with an optional 2K pin for near-floor positioning. The stand also nests with other C-stands to conserve space in grip trucks and storage rooms.\u003c\/p\u003e\u003ch3\u003eIncluded grip arm and heads\u003c\/h3\u003e\u003cp\u003eThe 40-inch arm and grip heads provide positioning control for flags, gels, bounce materials, and silks. Two cable clips help keep power and signal runs organized around the stand.\u003c\/p\u003e\u003ch3\u003eSet-friendly hardware\u003c\/h3\u003e\u003cp\u003eDamped spring risers reduce the risk of pinched hands when sections are lowered. Captive knobs stay attached during transport, and removable rubber feet help protect finished floors.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eThe SHAPE kit uses black anodized aluminum, a removable turtle base, and a sliding leg. The \u003ca href=\"https:\/\/filmgearcanada.com\/products\/fps-40in-master-c-stand-sliding-leg-kit-silver\"\u003eFPS 40-inch Master C-Stand Sliding Leg Kit\u003c\/a\u003e is the closer Filmgear alternative for buyers who prefer a stainless-steel silver stand. A conventional light stand is faster for a small fixture, but it does not provide the same grip-arm positioning for flags and diffusion.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThis 40-inch C-Stand is suited to photo studios, film crews, interview teams, grip departments, rental houses, and content studios that regularly position flags, silks, gels, reflectors, or compact lights.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose a smaller baby C-Stand for tight rooms and lighter travel kits. Choose a heavier steel stand when maximum mass and rigidity matter more than transport weight, or a taller combo stand when the load requires a junior receiver and more working height.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1x SHAPE 40-inch C-Stand\u003c\/li\u003e\n\u003cli\u003e1x removable turtle base\u003c\/li\u003e\n\u003cli\u003e1x 40-inch grip arm\u003c\/li\u003e\n\u003cli\u003eGrip heads\u003c\/li\u003e\n\u003cli\u003e2x cable clips\u003c\/li\u003e\n\u003cli\u003eRemovable rubber feet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMaterial: black anodized aluminum\u003c\/li\u003e\n\u003cli\u003eLoad capacity: 25 lb \/ 11 kg\u003c\/li\u003e\n\u003cli\u003eMinimum height: 55 inches \/ 140 cm\u003c\/li\u003e\n\u003cli\u003eMaximum height: 9.7 ft \/ 296 cm\u003c\/li\u003e\n\u003cli\u003eFolded height: 55 inches \/ 140 cm\u003c\/li\u003e\n\u003cli\u003eTop mount: 5\/8-inch baby-pin accessories\u003c\/li\u003e\n\u003cli\u003eBase compatibility: optional 2K pin accessories\u003c\/li\u003e\n\u003cli\u003eProduct weight: 9.53 kg\u003c\/li\u003e\n\u003cli\u003eSKU: TSB40\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eHow much weight can the SHAPE 40-inch C-Stand hold?\u003c\/strong\u003e\u003cbr\u003eThe stand is rated for a maximum load of 25 lb \/ 11 kg. Always balance the load correctly, tighten each section, and use suitable ballast based on the set conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow tall is the SHAPE TSB40 C-Stand?\u003c\/strong\u003e\u003cbr\u003eIt reaches a maximum height of 9.7 ft \/ 296 cm. Its minimum and folded height are both 55 inches \/ 140 cm, which is important when planning vehicle and storage space.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the C-Stand kit?\u003c\/strong\u003e\u003cbr\u003eThe kit includes the stand, removable turtle base, 40-inch grip arm, grip heads, two cable clips, and removable rubber feet. The arm and heads support common flag, silk, gel, and bounce-card setups.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the turtle base be removed?\u003c\/strong\u003e\u003cbr\u003eYes. The base is removable and can accept an optional 2K pin for low-angle positioning. The stand top is compatible with 5\/8-inch baby-pin accessories.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this C-Stand suitable for uneven floors?\u003c\/strong\u003e\u003cbr\u003eThe sliding leg helps level the stand on uneven surfaces and steps. The removable rubber feet can also protect finished studio floors during setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy a SHAPE C-Stand in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 40-inch C-Stand Turtle Base Kit with Canada-wide shipping and support from Vancouver for grip, film, and studio customers.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eBuy the SHAPE C-Stand in Canada from Filmgear Canada, with Canada-wide shipping and Vancouver support. This oversized item may require a separate shipping quote or surcharge depending on destination.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348204036355,"sku":"TSB40","price":197.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/upload-1785409008806.jpg?v=1785409010"},{"product_id":"shape-15-mm-baseplate-for-canon-c100-c300-c500","title":"SHAPE 15 mm Baseplate for Canon C100\/C300\/C500","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 15 mm Baseplate for Canon C100\/C300\/C500 is a camera baseplate and rod-support component for camera mounting, lens support, matte box, and follow-focus builds whose setup calls for The SHAPE C300 Baseplate is specifically for the Canon EOS C100 C300 C500 cameras. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing camera baseplate products and supports camera mounting, lens support, matte box, and follow-focus builds when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe SHAPE C300 Baseplate is specifically for the Canon EOS C100 C300 C500 cameras. This camera accessory provides a small, light setup solution that is expandable to a more elaborate setup. It features a pair of 15 mm rods that are 12″ long through the length of the baseplate. The baseplate attaches underneath the camera with 4 x M4 screws or with 3\/8\"-16 and 1\/4\"-20 screws that are included.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eThe SHAPE C300 Baseplate is specifically for the Canon EOS C100 C300 C500 cameras. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eThis camera accessory provides a small, light setup solution that is expandable to a more elaborate setup. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eIt features a pair of 15 mm rods that are 12″ long through the length of the baseplate. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eThe baseplate attaches underneath the camera with 4 x M4 screws or with 3\/8\"-16 and 1\/4\"-20 screws that are included. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eThe baseplate maintains the proper lens center to the rod height for use with available rod-mounted accessories. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this camera baseplate. Products found while comparing camera rig and 15mm rods may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE 15 mm Baseplate for Canon C100\/C300\/C500 is intended for camera mounting, lens support, matte box, and follow-focus builds building a dependable camera mounting, lens support, matte box, and follow-focus builds setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another baseplate when your camera body, rod height, 15 mm or 19 mm standard, dovetail, or tripod interface differs from this model.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE 15 mm Baseplate for Canon C100\/C300\/C500\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: B15C300\u003c\/li\u003e\n\u003cli\u003eThe SHAPE C300 Baseplate is specifically for the Canon EOS C100 C300 C500 cameras.\u003c\/li\u003e\n\u003cli\u003eThis camera accessory provides a small, light setup solution that is expandable to a more elaborate setup.\u003c\/li\u003e\n\u003cli\u003eIt features a pair of 15 mm rods that are 12″ long through the length of the baseplate.\u003c\/li\u003e\n\u003cli\u003eThe baseplate attaches underneath the camera with 4 x M4 screws or with 3\/8\"-16 and 1\/4\"-20 screws that are included.\u003c\/li\u003e\n\u003cli\u003eThe baseplate maintains the proper lens center to the rod height for use with available rod-mounted accessories.\u003c\/li\u003e\n\u003cli\u003eThis allows you to use open standard follow focus units, zoom motors, and matte boxes with your camera while using the baseplate.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model B15C300 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model B15C300 is a camera baseplate and rod-support component intended for camera mounting, lens support, matte box, and follow-focus builds. The SHAPE C300 Baseplate is specifically for the Canon EOS C100 C300 C500 cameras.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model B15C300?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model B15C300, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model B15C300?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model B15C300, This camera accessory provides a small, light setup solution that is expandable to a more elaborate setup. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model B15C300?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model B15C300. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU B15C300 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model B15C300 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another baseplate when your camera body, rod height, 15 mm or 19 mm standard, dovetail, or tripod interface differs from this model. SHAPE model B15C300 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE 15 mm Baseplate for Canon C100\/C300\/C500 in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 15 mm Baseplate for Canon C100\/C300\/C500 with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE 15 mm Baseplate for Canon C100\/C300\/C500 from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348339040515,"sku":"B15C300","price":181.36,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-15-mm-baseplate-for-canon-c100c300c500-532436.jpg?v=1785411910"},{"product_id":"shape-15-mm-baseplate-for-canon-c200-c200b","title":"SHAPE 15 mm Baseplate for Canon C200\/C200B","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 15 mm Baseplate for Canon C200\/C200B is a camera baseplate and rod-support component for camera mounting, lens support, matte box, and follow-focus builds whose setup calls for The SHAPE Baseplate is designed for use with the Canon C200 camera. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing camera baseplate products and supports camera mounting, lens support, matte box, and follow-focus builds when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe SHAPE Baseplate is designed for use with the Canon C200 camera. The baseplate features three attachment points for securing your camera and tripod plate attachment via three 1\/4″-20 mounting holes. Unscrewing the bottom section of the baseplate with an Allen key (included) reveals an adapter plate with several 1\/4″-20 and 3\/8″-16 threaded holes, suitable for optimizing your C200 camera balance on a tripod, gimbal, or drone.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eThe SHAPE Baseplate is designed for use with the Canon C200 camera. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eThe baseplate features three attachment points for securing your camera and tripod plate attachment via three 1\/4″-20 mounting holes. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eUnscrewing the bottom section of the baseplate with an Allen key (included) reveals an adapter plate with several 1\/4″-20 and 3\/8″-16 threaded holes, suitable for optimizing your C200 camera balance on a tripod, gimbal, or drone. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eIts physical interface should be checked against the connected camera, lens, fixture, stand, or accessory before use. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this camera baseplate. Products found while comparing camera rig and 15mm rods may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE 15 mm Baseplate for Canon C200\/C200B is intended for camera mounting, lens support, matte box, and follow-focus builds building a dependable camera mounting, lens support, matte box, and follow-focus builds setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another baseplate when your camera body, rod height, 15 mm or 19 mm standard, dovetail, or tripod interface differs from this model.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE 15 mm Baseplate for Canon C200\/C200B\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: B15C200\u003c\/li\u003e\n\u003cli\u003eThe SHAPE Baseplate is designed for use with the Canon C200 camera.\u003c\/li\u003e\n\u003cli\u003eThe baseplate features three attachment points for securing your camera and tripod plate attachment via three 1\/4″-20 mounting holes.\u003c\/li\u003e\n\u003cli\u003eUnscrewing the bottom section of the baseplate with an Allen key (included) reveals an adapter plate with several 1\/4″-20 and 3\/8″-16 threaded holes, suitable for optimizing your C200 camera balance on a tripod, gimbal, or drone.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model B15C200 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model B15C200 is a camera baseplate and rod-support component intended for camera mounting, lens support, matte box, and follow-focus builds. The SHAPE Baseplate is designed for use with the Canon C200 camera.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model B15C200?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model B15C200, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model B15C200?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model B15C200, The baseplate features three attachment points for securing your camera and tripod plate attachment via three 1\/4″-20 mounting holes. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model B15C200?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model B15C200. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU B15C200 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model B15C200 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another baseplate when your camera body, rod height, 15 mm or 19 mm standard, dovetail, or tripod interface differs from this model. SHAPE model B15C200 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE 15 mm Baseplate for Canon C200\/C200B in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 15 mm Baseplate for Canon C200\/C200B with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE 15 mm Baseplate for Canon C200\/C200B from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348339106051,"sku":"B15C200","price":245.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-15-mm-baseplate-for-canon-c200c200b-148514.jpg?v=1785411921"},{"product_id":"shape-15-mm-lws-cuff-rod-bloc-arri-rosette","title":"SHAPE 15 mm LWS Cuff Rod Bloc ARRI Rosette","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 15 mm LWS Cuff Rod Bloc ARRI Rosette is a camera rod-support accessory for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories whose setup calls for The SHAPE Arri rosette 15 mm rod bracket is designed to mount handgrips or other accessories on each side. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing 15mm rods products and supports 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe SHAPE Arri rosette 15 mm rod bracket is designed to mount handgrips or other accessories on each side. It fits on 15 mm lightweight rods and features ARRI rosettes on both ends. The ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without removing accessories in front or behind (matte box, follow focus, lens support, zoom motors).\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eThe SHAPE Arri rosette 15 mm rod bracket is designed to mount handgrips or other accessories on each side. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eIt fits on 15 mm lightweight rods and features ARRI rosettes on both ends. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eThe ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without removing accessories in front or behind (matte box, follow focus, lens support, zoom motors). In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eThe SHAPE cuff system allows you to quickly install your handles or other accessories in one clamp. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eBy pressing the block below the rods and locking the cuff with a ratchet knob, the cuff system is super strong, providing you with the most solid design on the market. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this 15mm rods. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE 15 mm LWS Cuff Rod Bloc ARRI Rosette is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories building a dependable 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE 15 mm LWS Cuff Rod Bloc ARRI Rosette\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: CUF15\u003c\/li\u003e\n\u003cli\u003eThe SHAPE Arri rosette 15 mm rod bracket is designed to mount handgrips or other accessories on each side.\u003c\/li\u003e\n\u003cli\u003eIt fits on 15 mm lightweight rods and features ARRI rosettes on both ends.\u003c\/li\u003e\n\u003cli\u003eThe ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without removing accessories in front or behind (matte box, follow focus, lens support, zoom motors).\u003c\/li\u003e\n\u003cli\u003eThe SHAPE cuff system allows you to quickly install your handles or other accessories in one clamp.\u003c\/li\u003e\n\u003cli\u003eBy pressing the block below the rods and locking the cuff with a ratchet knob, the cuff system is super strong, providing you with the most solid design on the market.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model CUF15 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model CUF15 is a camera rod-support accessory intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. The SHAPE Arri rosette 15 mm rod bracket is designed to mount handgrips or other accessories on each side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model CUF15?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model CUF15, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model CUF15?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model CUF15, It fits on 15 mm lightweight rods and features ARRI rosettes on both ends. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model CUF15?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model CUF15. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU CUF15 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model CUF15 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard. SHAPE model CUF15 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE 15 mm LWS Cuff Rod Bloc ARRI Rosette in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 15 mm LWS Cuff Rod Bloc ARRI Rosette with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE 15 mm LWS Cuff Rod Bloc ARRI Rosette from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348340842755,"sku":"CUF15","price":175.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-15-mm-lws-cuff-rod-bloc-arri-rosette-731467.jpg?v=1785411931"},{"product_id":"shape-15-mm-rod-bloc","title":"SHAPE 15 mm Rod Bloc","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 15 mm Rod Bloc is a camera rod-support accessory for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories whose setup calls for The SHAPE Rod Block attaches components to standard 15 mm camera support rods. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing 15mm rods products and supports 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe SHAPE Rod Block attaches components to standard 15 mm camera support rods. Features, like a camera plate or SHAPE's Quick Handle, attach via the Rod Block's two screw-threaded holes. Once the Rod Block is properly positioned along the rods, simply tighten its small red knob to secure it in place. The Rod Block is composed of lightweight anodized aluminum.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eThe SHAPE Rod Block attaches components to standard 15 mm camera support rods. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eFeatures, like a camera plate or SHAPE's Quick Handle, attach via the Rod Block's two screw-threaded holes. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eOnce the Rod Block is properly positioned along the rods, simply tighten its small red knob to secure it in place. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eThe Rod Block is composed of lightweight anodized aluminum. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this 15mm rods. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE 15 mm Rod Bloc is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories building a dependable 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE 15 mm Rod Bloc\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: RODSUP1\u003c\/li\u003e\n\u003cli\u003eThe SHAPE Rod Block attaches components to standard 15 mm camera support rods.\u003c\/li\u003e\n\u003cli\u003eFeatures, like a camera plate or SHAPE's Quick Handle, attach via the Rod Block's two screw-threaded holes.\u003c\/li\u003e\n\u003cli\u003eOnce the Rod Block is properly positioned along the rods, simply tighten its small red knob to secure it in place.\u003c\/li\u003e\n\u003cli\u003eThe Rod Block is composed of lightweight anodized aluminum.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model RODSUP1 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model RODSUP1 is a camera rod-support accessory intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. The SHAPE Rod Block attaches components to standard 15 mm camera support rods.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model RODSUP1?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model RODSUP1, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model RODSUP1?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model RODSUP1, Features, like a camera plate or SHAPE's Quick Handle, attach via the Rod Block's two screw-threaded holes. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model RODSUP1?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model RODSUP1. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU RODSUP1 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model RODSUP1 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard. SHAPE model RODSUP1 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE 15 mm Rod Bloc in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 15 mm Rod Bloc with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE 15 mm Rod Bloc from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348340908291,"sku":"RODSUP1","price":46.72,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-15-mm-rod-bloc-912207.jpg?v=1785411938"},{"product_id":"shape-15-mm-rods-10-inches","title":"SHAPE 15 mm Rods 10 inches","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 15 mm Rods 10 inches is a camera rod-support accessory for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories whose setup calls for Introducing the SHAPE 15-mm Aluminum Rods: the backbone of your camera rig's support system. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing 15mm rods products and supports 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eIntroducing the SHAPE 15-mm Aluminum Rods: the backbone of your camera rig's support system. This pair of meticulously crafted rods is tailored to seamlessly integrate into your setup, offering a sturdy foundation for your filming endeavors. Compatible with a diverse range of 15-mm accessories, these rods empower you to customize and optimize your rig according to your creative needs.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eIntroducing the SHAPE 15-mm Aluminum Rods: the backbone of your camera rig's support system. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eThis pair of meticulously crafted rods is tailored to seamlessly integrate into your setup, offering a sturdy foundation for your filming endeavors. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eCompatible with a diverse range of 15-mm accessories, these rods empower you to customize and optimize your rig according to your creative needs. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eElevate your filmmaking experience with SHAPE's reliable aluminum rods, engineered to deliver stability and versatility on every shoot. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this 15mm rods. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE 15 mm Rods 10 inches is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories building a dependable 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE 15 mm Rods 10 inches\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: 15TUBE10\u003c\/li\u003e\n\u003cli\u003eIntroducing the SHAPE 15-mm Aluminum Rods: the backbone of your camera rig's support system.\u003c\/li\u003e\n\u003cli\u003eThis pair of meticulously crafted rods is tailored to seamlessly integrate into your setup, offering a sturdy foundation for your filming endeavors.\u003c\/li\u003e\n\u003cli\u003eCompatible with a diverse range of 15-mm accessories, these rods empower you to customize and optimize your rig according to your creative needs.\u003c\/li\u003e\n\u003cli\u003eElevate your filmmaking experience with SHAPE's reliable aluminum rods, engineered to deliver stability and versatility on every shoot.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model 15TUBE10 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model 15TUBE10 is a camera rod-support accessory intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. Introducing the SHAPE 15-mm Aluminum Rods: the backbone of your camera rig's support system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model 15TUBE10?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 15TUBE10, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model 15TUBE10?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 15TUBE10, This pair of meticulously crafted rods is tailored to seamlessly integrate into your setup, offering a sturdy foundation for your filming endeavors. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model 15TUBE10?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model 15TUBE10. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU 15TUBE10 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model 15TUBE10 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard. SHAPE model 15TUBE10 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE 15 mm Rods 10 inches in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 15 mm Rods 10 inches with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE 15 mm Rods 10 inches from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348344676611,"sku":"15TUBE10","price":46.72,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-15-mm-rods-10-inches-558556.jpg?v=1785411951"},{"product_id":"shape-15-mm-rods-12-inches","title":"SHAPE 15 mm Rods 12 inches","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 15 mm Rods 12 inches is a camera rod-support accessory for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories whose setup calls for Introducing the SHAPE 15-mm Aluminum Rods: the essential building blocks for your camera rig. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing 15mm rods products and supports 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eIntroducing the SHAPE 15-mm Aluminum Rods: the essential building blocks for your camera rig. Crafted with precision from high-quality aluminum, this pair of rods provides the robust foundation needed to support your rigging setup. Compatible with a wide range of 15-mm accessories, these rods offer seamless integration and customization options.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eIntroducing the SHAPE 15-mm Aluminum Rods: the essential building blocks for your camera rig. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eCrafted with precision from high-quality aluminum, this pair of rods provides the robust foundation needed to support your rigging setup. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eCompatible with a wide range of 15-mm accessories, these rods offer seamless integration and customization options. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eElevate your filmmaking experience with SHAPE's reliable rods, designed to ensure stability and versatility on set. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this 15mm rods. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE 15 mm Rods 12 inches is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories building a dependable 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE 15 mm Rods 12 inches\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: 15TUBE12\u003c\/li\u003e\n\u003cli\u003eIntroducing the SHAPE 15-mm Aluminum Rods: the essential building blocks for your camera rig.\u003c\/li\u003e\n\u003cli\u003eCrafted with precision from high-quality aluminum, this pair of rods provides the robust foundation needed to support your rigging setup.\u003c\/li\u003e\n\u003cli\u003eCompatible with a wide range of 15-mm accessories, these rods offer seamless integration and customization options.\u003c\/li\u003e\n\u003cli\u003eElevate your filmmaking experience with SHAPE's reliable rods, designed to ensure stability and versatility on set.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model 15TUBE12 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model 15TUBE12 is a camera rod-support accessory intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. Introducing the SHAPE 15-mm Aluminum Rods: the essential building blocks for your camera rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model 15TUBE12?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 15TUBE12, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model 15TUBE12?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 15TUBE12, Crafted with precision from high-quality aluminum, this pair of rods provides the robust foundation needed to support your rigging setup. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model 15TUBE12?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model 15TUBE12. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU 15TUBE12 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model 15TUBE12 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard. SHAPE model 15TUBE12 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE 15 mm Rods 12 inches in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 15 mm Rods 12 inches with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE 15 mm Rods 12 inches from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348344709379,"sku":"15TUBE12","price":51.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-15-mm-rods-12-inches-303970.jpg?v=1785411958"},{"product_id":"shape-15-mm-rods-14-inches","title":"SHAPE 15 mm Rods 14 inches","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 15 mm Rods 14 inches is a camera rod-support accessory for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories whose setup calls for Introducing the SHAPE 15-mm Aluminum Rods: the indispensable foundation for your camera rig. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing 15mm rods products and supports 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eIntroducing the SHAPE 15-mm Aluminum Rods: the indispensable foundation for your camera rig. This pair of precision-engineered rods seamlessly integrates into your setup, providing a sturdy support structure for your filming endeavors. With the versatility to mount any 15-mm compatible accessories, these rods empower you to customize your rig to suit your creative vision.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eIntroducing the SHAPE 15-mm Aluminum Rods: the indispensable foundation for your camera rig. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eThis pair of precision-engineered rods seamlessly integrates into your setup, providing a sturdy support structure for your filming endeavors. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eWith the versatility to mount any 15-mm compatible accessories, these rods empower you to customize your rig to suit your creative vision. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eElevate your filmmaking experience with SHAPE's reliable aluminum rods, designed to optimize stability and versatility on set. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this 15mm rods. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE 15 mm Rods 14 inches is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories building a dependable 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE 15 mm Rods 14 inches\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: 15TUBE14\u003c\/li\u003e\n\u003cli\u003eIntroducing the SHAPE 15-mm Aluminum Rods: the indispensable foundation for your camera rig.\u003c\/li\u003e\n\u003cli\u003eThis pair of precision-engineered rods seamlessly integrates into your setup, providing a sturdy support structure for your filming endeavors.\u003c\/li\u003e\n\u003cli\u003eWith the versatility to mount any 15-mm compatible accessories, these rods empower you to customize your rig to suit your creative vision.\u003c\/li\u003e\n\u003cli\u003eElevate your filmmaking experience with SHAPE's reliable aluminum rods, designed to optimize stability and versatility on set.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model 15TUBE14 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model 15TUBE14 is a camera rod-support accessory intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. Introducing the SHAPE 15-mm Aluminum Rods: the indispensable foundation for your camera rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model 15TUBE14?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 15TUBE14, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model 15TUBE14?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 15TUBE14, This pair of precision-engineered rods seamlessly integrates into your setup, providing a sturdy support structure for your filming endeavors. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model 15TUBE14?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model 15TUBE14. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU 15TUBE14 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model 15TUBE14 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard. SHAPE model 15TUBE14 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE 15 mm Rods 14 inches in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 15 mm Rods 14 inches with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE 15 mm Rods 14 inches from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348344774915,"sku":"15TUBE14","price":53.05,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-15-mm-rods-14-inches-769165.jpg?v=1785411965"},{"product_id":"shape-15-mm-rods-18-inches","title":"SHAPE 15 mm Rods 18 inches","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 15 mm Rods 18 inches is a camera rod-support accessory for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories whose setup calls for Introducing SHAPE's essential addition to your camera rig: a pair of high-quality 15-mm aluminum rods. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing 15mm rods products and supports 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eIntroducing SHAPE's essential addition to your camera rig: a pair of high-quality 15-mm aluminum rods. These rods serve as the backbone of your rig, allowing you to effortlessly mount a variety of 15-mm compatible accessories. Crafted for durability and precision, they form the sturdy support structure your rig needs for seamless operation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eIntroducing SHAPE's essential addition to your camera rig: a pair of high-quality 15-mm aluminum rods. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eThese rods serve as the backbone of your rig, allowing you to effortlessly mount a variety of 15-mm compatible accessories. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eCrafted for durability and precision, they form the sturdy support structure your rig needs for seamless operation. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eElevate your filmmaking experience with SHAPE's reliable aluminum rods, designed to meet the demands of professional setups. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this 15mm rods. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE 15 mm Rods 18 inches is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories building a dependable 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE 15 mm Rods 18 inches\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: 15TUBE18\u003c\/li\u003e\n\u003cli\u003eIntroducing SHAPE's essential addition to your camera rig: a pair of high-quality 15-mm aluminum rods.\u003c\/li\u003e\n\u003cli\u003eThese rods serve as the backbone of your rig, allowing you to effortlessly mount a variety of 15-mm compatible accessories.\u003c\/li\u003e\n\u003cli\u003eCrafted for durability and precision, they form the sturdy support structure your rig needs for seamless operation.\u003c\/li\u003e\n\u003cli\u003eElevate your filmmaking experience with SHAPE's reliable aluminum rods, designed to meet the demands of professional setups.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model 15TUBE18 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model 15TUBE18 is a camera rod-support accessory intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. Introducing SHAPE's essential addition to your camera rig: a pair of high-quality 15-mm aluminum rods.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model 15TUBE18?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 15TUBE18, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model 15TUBE18?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 15TUBE18, These rods serve as the backbone of your rig, allowing you to effortlessly mount a variety of 15-mm compatible accessories. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model 15TUBE18?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model 15TUBE18. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU 15TUBE18 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model 15TUBE18 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard. SHAPE model 15TUBE18 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE 15 mm Rods 18 inches in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 15 mm Rods 18 inches with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE 15 mm Rods 18 inches from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348345168131,"sku":"15TUBE18","price":54.64,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-15-mm-rods-18-inches-810827.jpg?v=1785411973"},{"product_id":"shape-15-mm-rods-4-inches","title":"SHAPE 15 mm Rods 4 inches","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 15 mm Rods 4 inches is a camera rod-support accessory for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories whose setup calls for Introducing SHAPE's indispensable component for your camera rig: a pair of 15-mm aluminum rods. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing 15mm rods products and supports 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eIntroducing SHAPE's indispensable component for your camera rig: a pair of 15-mm aluminum rods. These rods serve as the foundation of your setup, allowing you to effortlessly attach a variety of 15-mm compatible accessories and establish the robust support structure essential for your rig's stability.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eIntroducing SHAPE's indispensable component for your camera rig: a pair of 15-mm aluminum rods. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eThese rods serve as the foundation of your setup, allowing you to effortlessly attach a variety of 15-mm compatible accessories and establish the robust support structure essential for your rig's stability. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eEngineered with precision and durability in mind, these rods ensure seamless integration and reliable performance on set. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eElevate your filmmaking experience with SHAPE's versatile aluminum rods, designed to enhance the functionality and versatility of your rig. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this 15mm rods. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE 15 mm Rods 4 inches is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories building a dependable 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE 15 mm Rods 4 inches\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: 15TUBE4\u003c\/li\u003e\n\u003cli\u003eIntroducing SHAPE's indispensable component for your camera rig: a pair of 15-mm aluminum rods.\u003c\/li\u003e\n\u003cli\u003eThese rods serve as the foundation of your setup, allowing you to effortlessly attach a variety of 15-mm compatible accessories and establish the robust support structure essential for your rig's stability.\u003c\/li\u003e\n\u003cli\u003eEngineered with precision and durability in mind, these rods ensure seamless integration and reliable performance on set.\u003c\/li\u003e\n\u003cli\u003eElevate your filmmaking experience with SHAPE's versatile aluminum rods, designed to enhance the functionality and versatility of your rig.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model 15TUBE4 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model 15TUBE4 is a camera rod-support accessory intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. Introducing SHAPE's indispensable component for your camera rig: a pair of 15-mm aluminum rods.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model 15TUBE4?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 15TUBE4, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model 15TUBE4?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 15TUBE4, These rods serve as the foundation of your setup, allowing you to effortlessly attach a variety of 15-mm compatible accessories and establish the robust support structure essential for your rig's stability. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model 15TUBE4?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model 15TUBE4. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU 15TUBE4 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model 15TUBE4 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard. SHAPE model 15TUBE4 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE 15 mm Rods 4 inches in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 15 mm Rods 4 inches with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE 15 mm Rods 4 inches from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348346511619,"sku":"15TUBE4","price":30.88,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-15-mm-rods-4-inches-100845.jpg?v=1785411980"},{"product_id":"shape-15-mm-rods-6-inches","title":"SHAPE 15 mm Rods 6 inches","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 15 mm Rods 6 inches is a camera rod-support accessory for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories whose setup calls for Introducing SHAPE's essential addition to your camera rig: a pair of 15-mm aluminum rods. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing 15mm rods products and supports 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eIntroducing SHAPE's essential addition to your camera rig: a pair of 15-mm aluminum rods. These rods serve as the backbone of your setup, enabling you to mount a wide range of 15-mm compatible accessories and establish the sturdy support structure your rig requires. Crafted with precision and durability in mind, these rods ensure seamless integration and reliable performance on set.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eIntroducing SHAPE's essential addition to your camera rig: a pair of 15-mm aluminum rods. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eThese rods serve as the backbone of your setup, enabling you to mount a wide range of 15-mm compatible accessories and establish the sturdy support structure your rig requires. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eCrafted with precision and durability in mind, these rods ensure seamless integration and reliable performance on set. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eElevate your filmmaking experience with SHAPE's versatile aluminum rods, designed to enhance the functionality and versatility of your rig. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this 15mm rods. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE 15 mm Rods 6 inches is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories building a dependable 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE 15 mm Rods 6 inches\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: 15TUBE6\u003c\/li\u003e\n\u003cli\u003eIntroducing SHAPE's essential addition to your camera rig: a pair of 15-mm aluminum rods.\u003c\/li\u003e\n\u003cli\u003eThese rods serve as the backbone of your setup, enabling you to mount a wide range of 15-mm compatible accessories and establish the sturdy support structure your rig requires.\u003c\/li\u003e\n\u003cli\u003eCrafted with precision and durability in mind, these rods ensure seamless integration and reliable performance on set.\u003c\/li\u003e\n\u003cli\u003eElevate your filmmaking experience with SHAPE's versatile aluminum rods, designed to enhance the functionality and versatility of your rig.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model 15TUBE6 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model 15TUBE6 is a camera rod-support accessory intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. Introducing SHAPE's essential addition to your camera rig: a pair of 15-mm aluminum rods.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model 15TUBE6?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 15TUBE6, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model 15TUBE6?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 15TUBE6, These rods serve as the backbone of your setup, enabling you to mount a wide range of 15-mm compatible accessories and establish the sturdy support structure your rig requires. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model 15TUBE6?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model 15TUBE6. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU 15TUBE6 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model 15TUBE6 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard. SHAPE model 15TUBE6 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE 15 mm Rods 6 inches in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 15 mm Rods 6 inches with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE 15 mm Rods 6 inches from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348349329667,"sku":"15TUBE6","price":35.63,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-15-mm-rods-6-inches-118947.jpg?v=1785411987"},{"product_id":"shape-15-mm-rods-8-inches","title":"SHAPE 15 mm Rods 8 inches","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 15 mm Rods 8 inches is a camera rod-support accessory for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories whose setup calls for Introducing the SHAPE 15-mm Aluminum Rods: the cornerstone of your camera rig's versatility. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing 15mm rods products and supports 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eIntroducing the SHAPE 15-mm Aluminum Rods: the cornerstone of your camera rig's versatility. This pair of precision-engineered rods is designed to seamlessly integrate into your setup, providing a robust framework for your rigging needs. With universal compatibility, you can effortlessly mount any 15-mm compatible accessories, allowing you to tailor your rig to perfection.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eIntroducing the SHAPE 15-mm Aluminum Rods: the cornerstone of your camera rig's versatility. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eThis pair of precision-engineered rods is designed to seamlessly integrate into your setup, providing a robust framework for your rigging needs. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eWith universal compatibility, you can effortlessly mount any 15-mm compatible accessories, allowing you to tailor your rig to perfection. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eElevate your filmmaking experience with SHAPE's durable aluminum rods, ensuring stability and reliability on every shoot. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this 15mm rods. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE 15 mm Rods 8 inches is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories building a dependable 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE 15 mm Rods 8 inches\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: 15TUBE8\u003c\/li\u003e\n\u003cli\u003eIntroducing the SHAPE 15-mm Aluminum Rods: the cornerstone of your camera rig's versatility.\u003c\/li\u003e\n\u003cli\u003eThis pair of precision-engineered rods is designed to seamlessly integrate into your setup, providing a robust framework for your rigging needs.\u003c\/li\u003e\n\u003cli\u003eWith universal compatibility, you can effortlessly mount any 15-mm compatible accessories, allowing you to tailor your rig to perfection.\u003c\/li\u003e\n\u003cli\u003eElevate your filmmaking experience with SHAPE's durable aluminum rods, ensuring stability and reliability on every shoot.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model 15TUBE8 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model 15TUBE8 is a camera rod-support accessory intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. Introducing the SHAPE 15-mm Aluminum Rods: the cornerstone of your camera rig's versatility.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model 15TUBE8?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 15TUBE8, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model 15TUBE8?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 15TUBE8, This pair of precision-engineered rods is designed to seamlessly integrate into your setup, providing a robust framework for your rigging needs. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model 15TUBE8?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model 15TUBE8. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU 15TUBE8 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model 15TUBE8 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard. SHAPE model 15TUBE8 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE 15 mm Rods 8 inches in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 15 mm Rods 8 inches with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE 15 mm Rods 8 inches from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348350673155,"sku":"15TUBE8","price":38.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-15-mm-rods-8-inches-705679.jpg?v=1785411995"},{"product_id":"shape-15-mm-rods-female-female-extensions","title":"SHAPE 15 mm Rods Female-Female Extensions - 8 inches","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 15 mm Rods Female-Female Extensions - 8 inches is a camera rod-support accessory for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories whose setup calls for This pair of black 15 mm female-female extension rods are anodized aluminum rods with 1\/2\"-13 threaded female extremities. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing 15mm rods products and supports 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThis pair of black 15 mm female-female extension rods are anodized aluminum rods with 1\/2\"-13 threaded female extremities. The rods are 8\" (203mm) long and have a diameter of 0.59\" (15 mm). It is compatible with the 15 mm male-female rods, rod bloc and sliding rod Bloc. SHAPE 15 mm Rods Female-Female Extensions - 8 inches is designed for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. Its model-specific dimensions, interfaces, compatibility, and included configuration should be matched to the surrounding production setup before ordering.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eThis pair of black 15 mm female-female extension rods are anodized aluminum rods with 1\/2\"-13 threaded female extremities. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eThe rods are 8\" (203mm) long and have a diameter of 0.59\" (15 mm). Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eIt is compatible with the 15 mm male-female rods, rod bloc and sliding rod Bloc. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eIts physical interface should be checked against the connected camera, lens, fixture, stand, or accessory before use. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this 15mm rods. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE 15 mm Rods Female-Female Extensions - 8 inches is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories building a dependable 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE 15 mm Rods Female-Female Extensions - 8 inches\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: 2ROD15FF8\u003c\/li\u003e\n\u003cli\u003eThis pair of black 15 mm female-female extension rods are anodized aluminum rods with 1\/2\"-13 threaded female extremities.\u003c\/li\u003e\n\u003cli\u003eThe rods are 8\" (203mm) long and have a diameter of 0.59\" (15 mm).\u003c\/li\u003e\n\u003cli\u003eIt is compatible with the 15 mm male-female rods, rod bloc and sliding rod Bloc.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model 2ROD15FF8 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model 2ROD15FF8 is a camera rod-support accessory intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. This pair of black 15 mm female-female extension rods are anodized aluminum rods with 1\/2\"-13 threaded female extremities.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model 2ROD15FF8?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 2ROD15FF8, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model 2ROD15FF8?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 2ROD15FF8, The rods are 8\" (203mm) long and have a diameter of 0.59\" (15 mm). Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model 2ROD15FF8?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model 2ROD15FF8. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU 2ROD15FF8 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model 2ROD15FF8 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard. SHAPE model 2ROD15FF8 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE 15 mm Rods Female-Female Extensions - 8 inches in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 15 mm Rods Female-Female Extensions - 8 inches with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE 15 mm Rods Female-Female Extensions - 8 inches from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348352344323,"sku":"2ROD15FF8","price":42.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-15-mm-rods-female-female-extensions-441585.jpg?v=1785412004"},{"product_id":"shape-15-mm-rods-male-female-extensions-4-inches","title":"SHAPE 15 mm Rods Male-Female Extensions 4 inches","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 15 mm Rods Male-Female Extensions 4 inches is a camera rod-support accessory for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories whose setup calls for This pair of 4″ black 15 mm Extensions Rods features one male end and one female end, each with 1\/2″-13 threading. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing 15mm rods products and supports 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThis pair of 4″ black 15 mm Extensions Rods features one male end and one female end, each with 1\/2″-13 threading. The rods are composed of lightweight anodized aluminum for strength and durability. SHAPE 15 mm Rods Male-Female Extensions 4 inches is designed for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. Its model-specific dimensions, interfaces, compatibility, and included configuration should be matched to the surrounding production setup before ordering.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eThis pair of 4″ black 15 mm Extensions Rods features one male end and one female end, each with 1\/2″-13 threading. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eThe rods are composed of lightweight anodized aluminum for strength and durability. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eThe camera rod-support accessory format is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eIts physical interface should be checked against the connected camera, lens, fixture, stand, or accessory before use. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this 15mm rods. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE 15 mm Rods Male-Female Extensions 4 inches is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories building a dependable 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE 15 mm Rods Male-Female Extensions 4 inches\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: 2ROD15MF4\u003c\/li\u003e\n\u003cli\u003eThis pair of 4″ black 15 mm Extensions Rods features one male end and one female end, each with 1\/2″-13 threading.\u003c\/li\u003e\n\u003cli\u003eThe rods are composed of lightweight anodized aluminum for strength and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model 2ROD15MF4 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model 2ROD15MF4 is a camera rod-support accessory intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. This pair of 4″ black 15 mm Extensions Rods features one male end and one female end, each with 1\/2″-13 threading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model 2ROD15MF4?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 2ROD15MF4, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model 2ROD15MF4?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 2ROD15MF4, The rods are composed of lightweight anodized aluminum for strength and durability. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model 2ROD15MF4?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model 2ROD15MF4. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU 2ROD15MF4 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model 2ROD15MF4 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard. SHAPE model 2ROD15MF4 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE 15 mm Rods Male-Female Extensions 4 inches in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 15 mm Rods Male-Female Extensions 4 inches with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE 15 mm Rods Male-Female Extensions 4 inches from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348355653891,"sku":"2ROD15MF4","price":36.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-15-mm-rods-male-female-extensions-4-inches-244251.jpg?v=1785412011"},{"product_id":"shape-15-mm-rods-male-female-extensions-6-inches","title":"SHAPE 15 mm Rods Male-Female Extensions 6 inches","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 15 mm Rods Male-Female Extensions 6 inches is a camera rod-support accessory for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories whose setup calls for This pair of 6″ black 15 mm Extensions Rods features one male end and one female end, each with 1\/2″-13 threading. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing 15mm rods products and supports 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThis pair of 6″ black 15 mm Extensions Rods features one male end and one female end, each with 1\/2″-13 threading. The rods are composed of lightweight anodized aluminum for strength and durability. SHAPE 15 mm Rods Male-Female Extensions 6 inches is designed for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. Its model-specific dimensions, interfaces, compatibility, and included configuration should be matched to the surrounding production setup before ordering.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eThis pair of 6″ black 15 mm Extensions Rods features one male end and one female end, each with 1\/2″-13 threading. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eThe rods are composed of lightweight anodized aluminum for strength and durability. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eThe camera rod-support accessory format is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eIts physical interface should be checked against the connected camera, lens, fixture, stand, or accessory before use. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this 15mm rods. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE 15 mm Rods Male-Female Extensions 6 inches is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories building a dependable 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE 15 mm Rods Male-Female Extensions 6 inches\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: 2ROD15MF6\u003c\/li\u003e\n\u003cli\u003eThis pair of 6″ black 15 mm Extensions Rods features one male end and one female end, each with 1\/2″-13 threading.\u003c\/li\u003e\n\u003cli\u003eThe rods are composed of lightweight anodized aluminum for strength and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model 2ROD15MF6 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model 2ROD15MF6 is a camera rod-support accessory intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. This pair of 6″ black 15 mm Extensions Rods features one male end and one female end, each with 1\/2″-13 threading.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model 2ROD15MF6?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 2ROD15MF6, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model 2ROD15MF6?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 2ROD15MF6, The rods are composed of lightweight anodized aluminum for strength and durability. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model 2ROD15MF6?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model 2ROD15MF6. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU 2ROD15MF6 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model 2ROD15MF6 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard. SHAPE model 2ROD15MF6 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE 15 mm Rods Male-Female Extensions 6 inches in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 15 mm Rods Male-Female Extensions 6 inches with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE 15 mm Rods Male-Female Extensions 6 inches from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348356505859,"sku":"2ROD15MF6","price":39.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-15-mm-rods-male-female-extensions-6-inches-328777.jpg?v=1785412017"},{"product_id":"shape-15-mm-studio-cuff-rod-bloc-arri-rosette","title":"SHAPE 15 mm Studio Cuff Rod Bloc ARRI Rosette","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 15 mm Studio Cuff Rod Bloc ARRI Rosette is a camera rod-support accessory for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories whose setup calls for The SHAPE Arri rosette 15 mm studio rod bracket is designed to mount handgrips or other accessories on each side. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing 15mm rods products and supports 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe SHAPE Arri rosette 15 mm studio rod bracket is designed to mount handgrips or other accessories on each side. It fits on 15 mm sudio rods and features ARRI rosettes on both ends. The ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without removing accessories in front or behind (matte box, follow focus, lens support, zoom motors).\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eThe SHAPE Arri rosette 15 mm studio rod bracket is designed to mount handgrips or other accessories on each side. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eIt fits on 15 mm sudio rods and features ARRI rosettes on both ends. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eThe ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without removing accessories in front or behind (matte box, follow focus, lens support, zoom motors). In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eThe SHAPE cuff system allows you to install your handles or other accessories in one clamp quickly. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eBy pressing the block below the rods and locking the cuff with a ratchet knob, the cuff system is super strong, providing you with the most solid system on the market. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this 15mm rods. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE 15 mm Studio Cuff Rod Bloc ARRI Rosette is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories building a dependable 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE 15 mm Studio Cuff Rod Bloc ARRI Rosette\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: CUFST\u003c\/li\u003e\n\u003cli\u003eThe SHAPE Arri rosette 15 mm studio rod bracket is designed to mount handgrips or other accessories on each side.\u003c\/li\u003e\n\u003cli\u003eIt fits on 15 mm sudio rods and features ARRI rosettes on both ends.\u003c\/li\u003e\n\u003cli\u003eThe ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without removing accessories in front or behind (matte box, follow focus, lens support, zoom motors).\u003c\/li\u003e\n\u003cli\u003eThe SHAPE cuff system allows you to install your handles or other accessories in one clamp quickly.\u003c\/li\u003e\n\u003cli\u003eBy pressing the block below the rods and locking the cuff with a ratchet knob, the cuff system is super strong, providing you with the most solid system on the market.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model CUFST used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model CUFST is a camera rod-support accessory intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. The SHAPE Arri rosette 15 mm studio rod bracket is designed to mount handgrips or other accessories on each side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model CUFST?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model CUFST, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model CUFST?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model CUFST, It fits on 15 mm sudio rods and features ARRI rosettes on both ends. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model CUFST?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model CUFST. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU CUFST to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model CUFST compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard. SHAPE model CUFST is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE 15 mm Studio Cuff Rod Bloc ARRI Rosette in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 15 mm Studio Cuff Rod Bloc ARRI Rosette with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE 15 mm Studio Cuff Rod Bloc ARRI Rosette from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348357882115,"sku":"CUFST","price":175.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-15-mm-studio-cuff-rod-bloc-arri-rosette-548793.jpg?v=1785412028"},{"product_id":"shape-19-mm-rods-10-inches","title":"SHAPE 19 mm Rods 10 inches","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 19 mm Rods 10 inches is a camera rod-support accessory for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories whose setup calls for Upgrade your camera rig effortlessly with SHAPE's 19 mm Aluminum Rods (10″). Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing 15mm rods products and supports 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eUpgrade your camera rig effortlessly with SHAPE's 19 mm Aluminum Rods (10″). Expand your setup and integrate SHAPE and third-party accessories compatible with 19 mm rods. Crafted from durable aluminum with a clear finish, each rod measures 19 mm in diameter and 10 inches in length. Hollow and non-threaded, they offer versatility without adding unnecessary weight.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eUpgrade your camera rig effortlessly with SHAPE's 19 mm Aluminum Rods (10″). This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eExpand your setup and integrate SHAPE and third-party accessories compatible with 19 mm rods. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eCrafted from durable aluminum with a clear finish, each rod measures 19 mm in diameter and 10 inches in length. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eHollow and non-threaded, they offer versatility without adding unnecessary weight. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this 15mm rods. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE 19 mm Rods 10 inches is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories building a dependable 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE 19 mm Rods 10 inches\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: 19TUBE10\u003c\/li\u003e\n\u003cli\u003eUpgrade your camera rig effortlessly with SHAPE's 19 mm Aluminum Rods (10″).\u003c\/li\u003e\n\u003cli\u003eExpand your setup and integrate SHAPE and third-party accessories compatible with 19 mm rods.\u003c\/li\u003e\n\u003cli\u003eCrafted from durable aluminum with a clear finish, each rod measures 19 mm in diameter and 10 inches in length.\u003c\/li\u003e\n\u003cli\u003eHollow and non-threaded, they offer versatility without adding unnecessary weight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model 19TUBE10 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model 19TUBE10 is a camera rod-support accessory intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. Upgrade your camera rig effortlessly with SHAPE's 19 mm Aluminum Rods (10″).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model 19TUBE10?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 19TUBE10, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model 19TUBE10?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 19TUBE10, Expand your setup and integrate SHAPE and third-party accessories compatible with 19 mm rods. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model 19TUBE10?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model 19TUBE10. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU 19TUBE10 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model 19TUBE10 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard. SHAPE model 19TUBE10 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE 19 mm Rods 10 inches in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 19 mm Rods 10 inches with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE 19 mm Rods 10 inches from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348360732931,"sku":"19TUBE10","price":63.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-19-mm-rods-10-inches-959894.jpg?v=1785412035"},{"product_id":"shape-19-mm-rods-12-inches","title":"SHAPE 19 mm Rods 12 inches","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 19 mm Rods 12 inches is a camera rod-support accessory for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories whose setup calls for This pair of SHAPE 19 mm Aluminum Rods (12″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 19 mm rods. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing 15mm rods products and supports 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThis pair of SHAPE 19 mm Aluminum Rods (12″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 19 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eThis pair of SHAPE 19 mm Aluminum Rods (12″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 19 mm rods. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eWith these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eThe rods are each 19 mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eIts physical interface should be checked against the connected camera, lens, fixture, stand, or accessory before use. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this 15mm rods. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE 19 mm Rods 12 inches is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories building a dependable 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE 19 mm Rods 12 inches\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: 19TUBE12\u003c\/li\u003e\n\u003cli\u003eThis pair of SHAPE 19 mm Aluminum Rods (12″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 19 mm rods.\u003c\/li\u003e\n\u003cli\u003eWith these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.\u003c\/li\u003e\n\u003cli\u003eThe rods are each 19 mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model 19TUBE12 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model 19TUBE12 is a camera rod-support accessory intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. This pair of SHAPE 19 mm Aluminum Rods (12″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 19 mm rods.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model 19TUBE12?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 19TUBE12, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model 19TUBE12?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 19TUBE12, With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model 19TUBE12?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model 19TUBE12. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU 19TUBE12 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model 19TUBE12 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard. SHAPE model 19TUBE12 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE 19 mm Rods 12 inches in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 19 mm Rods 12 inches with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE 19 mm Rods 12 inches from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348361421059,"sku":"19TUBE12","price":72.06,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-19-mm-rods-12-inches-134141.jpg?v=1785412042"},{"product_id":"shape-19-mm-rods-4-inches","title":"SHAPE 19 mm Rods 4 inches","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 19 mm Rods 4 inches is a camera rod-support accessory for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories whose setup calls for This pair of SHAPE 19 mm Aluminum Rods (4″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 19 mm rods. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing 15mm rods products and supports 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThis pair of SHAPE 19 mm Aluminum Rods (4″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 19 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 19 mm in diameter, 4 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eThis pair of SHAPE 19 mm Aluminum Rods (4″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 19 mm rods. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eWith these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eThe rods are each 19 mm in diameter, 4 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eIts physical interface should be checked against the connected camera, lens, fixture, stand, or accessory before use. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this 15mm rods. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE 19 mm Rods 4 inches is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories building a dependable 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE 19 mm Rods 4 inches\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: 19TUBE4\u003c\/li\u003e\n\u003cli\u003eThis pair of SHAPE 19 mm Aluminum Rods (4″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 19 mm rods.\u003c\/li\u003e\n\u003cli\u003eWith these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.\u003c\/li\u003e\n\u003cli\u003eThe rods are each 19 mm in diameter, 4 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model 19TUBE4 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model 19TUBE4 is a camera rod-support accessory intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. This pair of SHAPE 19 mm Aluminum Rods (4″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 19 mm rods.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model 19TUBE4?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 19TUBE4, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model 19TUBE4?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 19TUBE4, With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model 19TUBE4?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model 19TUBE4. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU 19TUBE4 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model 19TUBE4 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard. SHAPE model 19TUBE4 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE 19 mm Rods 4 inches in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 19 mm Rods 4 inches with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE 19 mm Rods 4 inches from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348362436867,"sku":"19TUBE4","price":38.01,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-19-mm-rods-4-inches-426027.jpg?v=1785412049"},{"product_id":"shape-19-mm-rods-6-inches","title":"SHAPE 19 mm Rods 6 inches","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 19 mm Rods 6 inches is a camera rod-support accessory for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories whose setup calls for This pair of SHAPE 19 mm Aluminum Rods (6″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 19 mm rods. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing 15mm rods products and supports 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThis pair of SHAPE 19 mm Aluminum Rods (6″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 19 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 19 mm in diameter, 6 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eThis pair of SHAPE 19 mm Aluminum Rods (6″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 19 mm rods. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eWith these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eThe rods are each 19 mm in diameter, 6 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eIts physical interface should be checked against the connected camera, lens, fixture, stand, or accessory before use. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this 15mm rods. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE 19 mm Rods 6 inches is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories building a dependable 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE 19 mm Rods 6 inches\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: 19TUBE6\u003c\/li\u003e\n\u003cli\u003eThis pair of SHAPE 19 mm Aluminum Rods (6″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 19 mm rods.\u003c\/li\u003e\n\u003cli\u003eWith these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.\u003c\/li\u003e\n\u003cli\u003eThe rods are each 19 mm in diameter, 6 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model 19TUBE6 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model 19TUBE6 is a camera rod-support accessory intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. This pair of SHAPE 19 mm Aluminum Rods (6″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 19 mm rods.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model 19TUBE6?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 19TUBE6, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model 19TUBE6?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 19TUBE6, With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model 19TUBE6?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model 19TUBE6. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU 19TUBE6 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model 19TUBE6 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard. SHAPE model 19TUBE6 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE 19 mm Rods 6 inches in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 19 mm Rods 6 inches with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE 19 mm Rods 6 inches from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348363124995,"sku":"19TUBE6","price":45.93,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-19-mm-rods-6-inches-134582.jpg?v=1785412055"},{"product_id":"shape-19-mm-rods-8-inches","title":"SHAPE 19 mm Rods 8 inches","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 19 mm Rods 8 inches is a camera rod-support accessory for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories whose setup calls for This pair of SHAPE 19 mm Aluminum Rods (8″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 19 mm rods. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing 15mm rods products and supports 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThis pair of SHAPE 19 mm Aluminum Rods (8″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 19 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. The rods are each 19 mm in diameter, 8 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eThis pair of SHAPE 19 mm Aluminum Rods (8″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 19 mm rods. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eWith these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eThe rods are each 19 mm in diameter, 8 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eIts physical interface should be checked against the connected camera, lens, fixture, stand, or accessory before use. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this 15mm rods. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE 19 mm Rods 8 inches is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories building a dependable 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE 19 mm Rods 8 inches\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: 19TUBE8\u003c\/li\u003e\n\u003cli\u003eThis pair of SHAPE 19 mm Aluminum Rods (8″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 19 mm rods.\u003c\/li\u003e\n\u003cli\u003eWith these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.\u003c\/li\u003e\n\u003cli\u003eThe rods are each 19 mm in diameter, 8 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model 19TUBE8 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model 19TUBE8 is a camera rod-support accessory intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. This pair of SHAPE 19 mm Aluminum Rods (8″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 19 mm rods.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model 19TUBE8?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 19TUBE8, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model 19TUBE8?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 19TUBE8, With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model 19TUBE8?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model 19TUBE8. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU 19TUBE8 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model 19TUBE8 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard. SHAPE model 19TUBE8 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE 19 mm Rods 8 inches in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 19 mm Rods 8 inches with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE 19 mm Rods 8 inches from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348366958851,"sku":"19TUBE8","price":53.85,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-19-mm-rods-8-inches-613464.jpg?v=1785412061"},{"product_id":"shape-19-mm-studio-cuff-rod-bloc-arri-rosette","title":"SHAPE 19 mm Studio Cuff Rod Bloc ARRI Rosette","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 19 mm Studio Cuff Rod Bloc ARRI Rosette is a camera rod-support accessory for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories whose setup calls for The SHAPE Arri rosette 19 mm studio rod bracket is designed to mount handgrips or other accessories on each side. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing 15mm rods products and supports 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe SHAPE Arri rosette 19 mm studio rod bracket is designed to mount handgrips or other accessories on each side. It fits on 19 mm sudio rods and features ARRI rosettes on both ends. The ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without removing accessories in front or behind (matte box, follow focus, lens support, zoom motors).\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eThe SHAPE Arri rosette 19 mm studio rod bracket is designed to mount handgrips or other accessories on each side. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eIt fits on 19 mm sudio rods and features ARRI rosettes on both ends. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eThe ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without removing accessories in front or behind (matte box, follow focus, lens support, zoom motors). In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eThe SHAPE cuff system allows you to install your handles or other accessories in one clamp quickly. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eBy pressing the block below the rods and locking the cuff with a ratchet knob, the cuff system is super strong, providing you with the most solid system on the market. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this 15mm rods. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE 19 mm Studio Cuff Rod Bloc ARRI Rosette is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories building a dependable 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE 19 mm Studio Cuff Rod Bloc ARRI Rosette\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: CUF19\u003c\/li\u003e\n\u003cli\u003eThe SHAPE Arri rosette 19 mm studio rod bracket is designed to mount handgrips or other accessories on each side.\u003c\/li\u003e\n\u003cli\u003eIt fits on 19 mm sudio rods and features ARRI rosettes on both ends.\u003c\/li\u003e\n\u003cli\u003eThe ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without removing accessories in front or behind (matte box, follow focus, lens support, zoom motors).\u003c\/li\u003e\n\u003cli\u003eThe SHAPE cuff system allows you to install your handles or other accessories in one clamp quickly.\u003c\/li\u003e\n\u003cli\u003eBy pressing the block below the rods and locking the cuff with a ratchet knob, the cuff system is super strong, providing you with the most solid system on the market.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model CUF19 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model CUF19 is a camera rod-support accessory intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. The SHAPE Arri rosette 19 mm studio rod bracket is designed to mount handgrips or other accessories on each side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model CUF19?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model CUF19, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model CUF19?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model CUF19, It fits on 19 mm sudio rods and features ARRI rosettes on both ends. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model CUF19?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model CUF19. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU CUF19 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model CUF19 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard. SHAPE model CUF19 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE 19 mm Studio Cuff Rod Bloc ARRI Rosette in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 19 mm Studio Cuff Rod Bloc ARRI Rosette with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE 19 mm Studio Cuff Rod Bloc ARRI Rosette from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348368335107,"sku":"CUF19","price":175.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-19-mm-studio-cuff-rod-bloc-arri-rosette-494675.jpg?v=1785412071"},{"product_id":"shape-4k-12g-sdi-coaxial-cable-24-inches","title":"SHAPE 4K-12G SDI Coaxial Cable 24 inches","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 4K-12G SDI Coaxial Cable 24 inches is a video and monitoring cable for camera, monitor, recorder, transmitter, and video-village connections whose setup calls for With only 4mm in diameter, this 90-degree female-to-female BNC Shielded Cable from SHAPE can be used with nearly any component you have in your rig and will increase the accuracy of the signals sent from the video adapter. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing SDI cable products and supports camera, monitor, recorder, transmitter, and video-village connections when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eWith only 4mm in diameter, this 90-degree female-to-female BNC Shielded Cable from SHAPE can be used with nearly any component you have in your rig and will increase the accuracy of the signals sent from the video adapter. The 12G SDI BNC to BNC Connector Cable from SHAPE is designed for 12G-SDI\/4K applications requiring extended bandwidth and is rated for 12G-SDI.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eWith only 4mm in diameter, this 90-degree female-to-female BNC Shielded Cable from SHAPE can be used with nearly any component you have in your rig and will increase the accuracy of the signals sent from the video adapter. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eThe 12G SDI BNC to BNC Connector Cable from SHAPE is designed for 12G-SDI\/4K applications requiring extended bandwidth and is rated for 12G-SDI. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eThe video and monitoring cable format is intended for camera, monitor, recorder, transmitter, and video-village connections. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eIts physical interface should be checked against the connected camera, lens, fixture, stand, or accessory before use. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare connector format, connector angle, supported video bandwidth, cable length, gauge, and rig clearance before choosing a video cable. Products found while comparing 12G SDI cable and camera rig may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE 4K-12G SDI Coaxial Cable 24 inches is intended for camera, monitor, recorder, transmitter, and video-village connections building a dependable camera, monitor, recorder, transmitter, and video-village connections setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another video cable when your equipment uses a different HDMI, SDI, BNC, or mini\/micro connector, or when the required signal bandwidth and cable length differ.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE 4K-12G SDI Coaxial Cable 24 inches\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: 12G24\u003c\/li\u003e\n\u003cli\u003eWith only 4mm in diameter, this 90-degree female-to-female BNC Shielded Cable from SHAPE can be used with nearly any component you have in your rig and will increase the accuracy of the signals sent from the video adapter.\u003c\/li\u003e\n\u003cli\u003eThe 12G SDI BNC to BNC Connector Cable from SHAPE is designed for 12G-SDI\/4K applications requiring extended bandwidth and is rated for 12G-SDI.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model 12G24 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model 12G24 is a video and monitoring cable intended for camera, monitor, recorder, transmitter, and video-village connections. With only 4mm in diameter, this 90-degree female-to-female BNC Shielded Cable from SHAPE can be used with nearly any component you have in your rig and will increase the accuracy of the signals sent from the video adapter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model 12G24?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 12G24, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model 12G24?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 12G24, The 12G SDI BNC to BNC Connector Cable from SHAPE is designed for 12G-SDI\/4K applications requiring extended bandwidth and is rated for 12G-SDI. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model 12G24?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model 12G24. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU 12G24 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model 12G24 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another video cable when your equipment uses a different HDMI, SDI, BNC, or mini\/micro connector, or when the required signal bandwidth and cable length differ. SHAPE model 12G24 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE 4K-12G SDI Coaxial Cable 24 inches in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 4K-12G SDI Coaxial Cable 24 inches with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE 4K-12G SDI Coaxial Cable 24 inches from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348373446915,"sku":"12G24","price":78.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-4k-12g-sdi-coaxial-cable-24-inches-352580.jpg?v=1785412080"},{"product_id":"shape-5-inch-15mm-rod-with-1-4-20-mount","title":"SHAPE 5-inch 15mm Rod with 1\/4''-20 Mount","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 5-inch 15mm Rod with 1\/4''-20 Mount is a camera rod-support accessory for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories whose setup calls for The SHAPE 5-inch 15mm Rod with 1\/4\"-20 Mount features a durable 15mm bolt-on rod designed for seamless integration with camera accessories. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing 15mm rods products and supports 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe SHAPE 5-inch 15mm Rod with 1\/4\"-20 Mount features a durable 15mm bolt-on rod designed for seamless integration with camera accessories. This rod is equipped with an ARRI-standard locating pin, ensuring compatibility with a wide range of professional camera rigs and accessories, including SHAPE's Canon EOS C80 cage system.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eThe SHAPE 5-inch 15mm Rod with 1\/4\"-20 Mount features a durable 15mm bolt-on rod designed for seamless integration with camera accessories. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eThis rod is equipped with an ARRI-standard locating pin, ensuring compatibility with a wide range of professional camera rigs and accessories, including SHAPE's Canon EOS C80 cage system. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eThis rod system can be attached on 1\/4''-20 threaded holes with ARRI locating pins, and allows accessory attachment such as focus motors, follow focus systems, handles and more. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eIts physical interface should be checked against the connected camera, lens, fixture, stand, or accessory before use. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this 15mm rods. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE 5-inch 15mm Rod with 1\/4''-20 Mount is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories building a dependable 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE 5-inch 15mm Rod with 1\/4''-20 Mount\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: 515MR\u003c\/li\u003e\n\u003cli\u003eThe SHAPE 5-inch 15mm Rod with 1\/4\"-20 Mount features a durable 15mm bolt-on rod designed for seamless integration with camera accessories.\u003c\/li\u003e\n\u003cli\u003eThis rod is equipped with an ARRI-standard locating pin, ensuring compatibility with a wide range of professional camera rigs and accessories, including SHAPE's Canon EOS C80 cage system.\u003c\/li\u003e\n\u003cli\u003eThis rod system can be attached on 1\/4''-20 threaded holes with ARRI locating pins, and allows accessory attachment such as focus motors, follow focus systems, handles and more.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model 515MR used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model 515MR is a camera rod-support accessory intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. The SHAPE 5-inch 15mm Rod with 1\/4\"-20 Mount features a durable 15mm bolt-on rod designed for seamless integration with camera accessories.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model 515MR?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 515MR, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model 515MR?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model 515MR, This rod is equipped with an ARRI-standard locating pin, ensuring compatibility with a wide range of professional camera rigs and accessories, including SHAPE's Canon EOS C80 cage system. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model 515MR?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model 515MR. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU 515MR to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model 515MR compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard. SHAPE model 515MR is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE 5-inch 15mm Rod with 1\/4''-20 Mount in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 5-inch 15mm Rod with 1\/4''-20 Mount with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE 5-inch 15mm Rod with 1\/4''-20 Mount from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348374593795,"sku":"515MR","price":21.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-5-inch-15mm-rod-with-14-20-mount-938391.jpg?v=1785412092"},{"product_id":"shape-5-8-baby-pin-for-super-clamps","title":"SHAPE 5\/8 Baby Pin For Super Clamps","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE 5\/8 Baby Pin For Super Clamps is a professional camera accessory for camera mounting, control, support, or production workflow whose setup calls for SHAPE's chrome plated steel 5\/8 baby pin is the perfect accessory to be combined with SHAPE's super clamp. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing camera accessories canada products and supports camera mounting, control, support, or production workflow when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eSHAPE's chrome plated steel 5\/8 baby pin is the perfect accessory to be combined with SHAPE's super clamp. With a hexed stud at one end and a baby pin at the other, it's ideal to mount light fixtures, grip equipment or accessories with a baby receiver. This baby pin is 3 7\/8'' \/ 9.8 cm long. SHAPE 5\/8 Baby Pin For Super Clamps is designed for camera mounting, control, support, or production workflow. Its model-specific dimensions, interfaces, compatibility, and included configuration should be matched to the surrounding production setup before ordering.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eSHAPE's chrome plated steel 5\/8 baby pin is the perfect accessory to be combined with SHAPE's super clamp. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eWith a hexed stud at one end and a baby pin at the other, it's ideal to mount light fixtures, grip equipment or accessories with a baby receiver. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eThis baby pin is 3 7\/8'' \/ 9.8 cm long. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eIts physical interface should be checked against the connected camera, lens, fixture, stand, or accessory before use. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this camera accessories canada. Products found while comparing camera rig and quick release plate may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE 5\/8 Baby Pin For Super Clamps is intended for camera mounting, control, support, or production workflow building a dependable camera mounting, control, support, or production workflow setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another accessory when the camera model, mount, thread, rod standard, connector, dimensions, or intended rig position differs from this product.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE 5\/8 Baby Pin For Super Clamps\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: SP58\u003c\/li\u003e\n\u003cli\u003eSHAPE's chrome plated steel 5\/8 baby pin is the perfect accessory to be combined with SHAPE's super clamp.\u003c\/li\u003e\n\u003cli\u003eWith a hexed stud at one end and a baby pin at the other, it's ideal to mount light fixtures, grip equipment or accessories with a baby receiver.\u003c\/li\u003e\n\u003cli\u003eThis baby pin is 3 7\/8'' \/ 9.8 cm long.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model SP58 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model SP58 is a professional camera accessory intended for camera mounting, control, support, or production workflow. SHAPE's chrome plated steel 5\/8 baby pin is the perfect accessory to be combined with SHAPE's super clamp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model SP58?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model SP58, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model SP58?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model SP58, With a hexed stud at one end and a baby pin at the other, it's ideal to mount light fixtures, grip equipment or accessories with a baby receiver. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model SP58?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model SP58. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU SP58 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model SP58 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another accessory when the camera model, mount, thread, rod standard, connector, dimensions, or intended rig position differs from this product. SHAPE model SP58 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE 5\/8 Baby Pin For Super Clamps in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE 5\/8 Baby Pin For Super Clamps with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE 5\/8 Baby Pin For Super Clamps from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348381835523,"sku":"SP58","price":3.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-58-baby-pin-for-super-clamps-620473.jpg?v=1785412134"},{"product_id":"shape-adjustable-rod-bloc-for-15-mm-rods","title":"SHAPE Adjustable Rod Bloc for 15 mm Rods","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE Adjustable Rod Bloc for 15 mm Rods is a camera rod-support accessory for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories whose setup calls for The BLOC 15 Arri Rosette Adapter for 15 mm LWS and Studio-Spaced Rods from SHAPE provides a left-hand and a right-hand Arri rosette for adding hand grips and other accessories to a 15 mm rod system. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing 15mm rods products and supports 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe BLOC 15 Arri Rosette Adapter for 15 mm LWS and Studio-Spaced Rods from SHAPE provides a left-hand and a right-hand Arri rosette for adding hand grips and other accessories to a 15 mm rod system. The adapter features both 60 mm center-to-center \"LWS\" (lightweight support) and 100 mm center-to-center \"Studio\" spacing for compatibility with virtually any 15 mm rod system (19 mm rods are not supported).\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eThe BLOC 15 Arri Rosette Adapter for 15 mm LWS and Studio-Spaced Rods from SHAPE provides a left-hand and a right-hand Arri rosette for adding hand grips and other accessories to a 15 mm rod system. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eThe adapter features both 60 mm center-to-center \"LWS\" (lightweight support) and 100 mm center-to-center \"Studio\" spacing for compatibility with virtually any 15 mm rod system (19 mm rods are not supported). Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eThe camera rod-support accessory format is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eIts physical interface should be checked against the connected camera, lens, fixture, stand, or accessory before use. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this 15mm rods. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE Adjustable Rod Bloc for 15 mm Rods is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories building a dependable 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE Adjustable Rod Bloc for 15 mm Rods\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: BLOC1515ST\u003c\/li\u003e\n\u003cli\u003eThe BLOC 15 Arri Rosette Adapter for 15 mm LWS and Studio-Spaced Rods from SHAPE provides a left-hand and a right-hand Arri rosette for adding hand grips and other accessories to a 15 mm rod system.\u003c\/li\u003e\n\u003cli\u003eThe adapter features both 60 mm center-to-center \"LWS\" (lightweight support) and 100 mm center-to-center \"Studio\" spacing for compatibility with virtually any 15 mm rod system (19 mm rods are not supported).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model BLOC1515ST used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model BLOC1515ST is a camera rod-support accessory intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. The BLOC 15 Arri Rosette Adapter for 15 mm LWS and Studio-Spaced Rods from SHAPE provides a left-hand and a right-hand Arri rosette for adding hand grips and other accessories to a 15 mm rod system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model BLOC1515ST?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model BLOC1515ST, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model BLOC1515ST?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model BLOC1515ST, The adapter features both 60 mm center-to-center \"LWS\" (lightweight support) and 100 mm center-to-center \"Studio\" spacing for compatibility with virtually any 15 mm rod system (19 mm rods are not supported). Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model BLOC1515ST?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model BLOC1515ST. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU BLOC1515ST to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model BLOC1515ST compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard. SHAPE model BLOC1515ST is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE Adjustable Rod Bloc for 15 mm Rods in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE Adjustable Rod Bloc for 15 mm Rods with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE Adjustable Rod Bloc for 15 mm Rods from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348382195971,"sku":"BLOC1515ST","price":213.04,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-adjustable-rod-bloc-for-15-mm-rods-600911.jpg?v=1785412142"},{"product_id":"shape-adjustable-rod-bloc-for-15-to-19-mm-rods","title":"SHAPE Adjustable Rod Bloc for 15 to 19 mm Rods","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE Adjustable Rod Bloc for 15 to 19 mm Rods is a camera rod-support accessory for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories whose setup calls for The SHAPE Adjustable Rod Bloc for 15 to 19 mm Rods is designed to fit HAND10 handles from SHAPE (sold separately). Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing 15mm rods products and supports 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe SHAPE Adjustable Rod Bloc for 15 to 19 mm Rods is designed to fit HAND10 handles from SHAPE (sold separately). It fits both 15 mm lightweight and 19 mm studio rods and features ARRI rosettes. SHAPE Adjustable Rod Bloc for 15 to 19 mm Rods is designed for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. Its model-specific dimensions, interfaces, compatibility, and included configuration should be matched to the surrounding production setup before ordering.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eThe SHAPE Adjustable Rod Bloc for 15 to 19 mm Rods is designed to fit HAND10 handles from SHAPE (sold separately). This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eIt fits both 15 mm lightweight and 19 mm studio rods and features ARRI rosettes. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eThe camera rod-support accessory format is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eIts physical interface should be checked against the connected camera, lens, fixture, stand, or accessory before use. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this 15mm rods. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE Adjustable Rod Bloc for 15 to 19 mm Rods is intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories building a dependable 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE Adjustable Rod Bloc for 15 to 19 mm Rods\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: BLOC1519AR\u003c\/li\u003e\n\u003cli\u003eThe SHAPE Adjustable Rod Bloc for 15 to 19 mm Rods is designed to fit HAND10 handles from SHAPE (sold separately).\u003c\/li\u003e\n\u003cli\u003eIt fits both 15 mm lightweight and 19 mm studio rods and features ARRI rosettes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model BLOC1519AR used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model BLOC1519AR is a camera rod-support accessory intended for 15 mm or 19 mm rigging for lens, matte box, battery, and follow-focus accessories. The SHAPE Adjustable Rod Bloc for 15 to 19 mm Rods is designed to fit HAND10 handles from SHAPE (sold separately).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model BLOC1519AR?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model BLOC1519AR, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model BLOC1519AR?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model BLOC1519AR, It fits both 15 mm lightweight and 19 mm studio rods and features ARRI rosettes. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model BLOC1519AR?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model BLOC1519AR. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU BLOC1519AR to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model BLOC1519AR compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another rod component when your rig uses a different rod diameter, spacing, length, thread direction, or studio versus LWS standard. SHAPE model BLOC1519AR is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE Adjustable Rod Bloc for 15 to 19 mm Rods in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE Adjustable Rod Bloc for 15 to 19 mm Rods with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE Adjustable Rod Bloc for 15 to 19 mm Rods from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348384817411,"sku":"BLOC1519AR","price":213.04,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-adjustable-rod-bloc-for-15-to-19-mm-rods-862159.jpg?v=1785412150"},{"product_id":"shape-aluminum-baby-stand-square-legs-129","title":"SHAPE Aluminum Baby Stand Square Legs 12'9\"","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE Aluminum Baby Stand Square Legs 12'9\" is a professional light stand for studio and location lighting support whose setup calls for Elevate your equipment with the SHAPE Aluminum Lightweight Baby Kit Stand. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing light stand products and supports studio and location lighting support when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eElevate your equipment with the SHAPE Aluminum Lightweight Baby Kit Stand. With a sleek black anodized finish, it reaches a max height of 12.9'. Durable aluminum, unique locking collars, and square legs provide stability. The standard 5\/8'' top stud and extendable leg ensure versatility for various terrains.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eElevate your equipment with the SHAPE Aluminum Lightweight Baby Kit Stand. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eWith a sleek black anodized finish, it reaches a max height of 12.9'. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eDurable aluminum, unique locking collars, and square legs provide stability. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eThe standard 5\/8'' top stud and extendable leg ensure versatility for various terrains. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eA 36'' footprint guarantees stability for your gear. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare maximum height, payload, riser count, stand-top format, footprint, and transport length before choosing a light stand. Products found while comparing light stand canada and film lighting may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE Aluminum Baby Stand Square Legs 12'9\" is intended for studio and location lighting support building a dependable studio and location lighting support setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose a C-Stand when you need a grip arm and offset flag control, or a heavier combo stand when the fixture uses a junior pin and needs greater payload capacity.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE Aluminum Baby Stand Square Legs 12'9\"\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: ABS12\u003c\/li\u003e\n\u003cli\u003eElevate your equipment with the SHAPE Aluminum Lightweight Baby Kit Stand.\u003c\/li\u003e\n\u003cli\u003eWith a sleek black anodized finish, it reaches a max height of 12.9'.\u003c\/li\u003e\n\u003cli\u003eDurable aluminum, unique locking collars, and square legs provide stability.\u003c\/li\u003e\n\u003cli\u003eThe standard 5\/8'' top stud and extendable leg ensure versatility for various terrains.\u003c\/li\u003e\n\u003cli\u003eA 36'' footprint guarantees stability for your gear.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model ABS12 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model ABS12 is a professional light stand intended for studio and location lighting support. Elevate your equipment with the SHAPE Aluminum Lightweight Baby Kit Stand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model ABS12?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model ABS12, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model ABS12?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model ABS12, With a sleek black anodized finish, it reaches a max height of 12.9'. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model ABS12?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model ABS12. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU ABS12 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model ABS12 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose a C-Stand when you need a grip arm and offset flag control, or a heavier combo stand when the fixture uses a junior pin and needs greater payload capacity. SHAPE model ABS12 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE Aluminum Baby Stand Square Legs 12'9\" in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE Aluminum Baby Stand Square Legs 12'9\" with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE Aluminum Baby Stand Square Legs 12'9\" from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348386423043,"sku":"ABS12","price":129.35,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-aluminum-baby-stand-square-legs-129-824592.jpg?v=1785412167"},{"product_id":"shape-aluminum-combo-triple-riser-stand-147","title":"SHAPE Aluminum Combo Triple Riser Stand 14'7\"","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE Aluminum Combo Triple Riser Stand 14'7\" is a professional light stand for studio and location lighting support whose setup calls for The SHAPE Aluminum Triple Riser Combo Black Stand offers a robust solution for your equipment. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing light stand products and supports studio and location lighting support when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe SHAPE Aluminum Triple Riser Combo Black Stand offers a robust solution for your equipment. With a black anodized aluminum finish, it reaches a maximum height of 12.3' and supports up to 68 lbs. The durable design features square legs and adjustable locking collars. The Posi-V-Lock receiver with a 5\/8'' stud ensures stability, and a unique extendable leg adapts to uneven terrain.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eThe SHAPE Aluminum Triple Riser Combo Black Stand offers a robust solution for your equipment. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eWith a black anodized aluminum finish, it reaches a maximum height of 12.3' and supports up to 68 lbs. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eThe durable design features square legs and adjustable locking collars. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eThe Posi-V-Lock receiver with a 5\/8'' stud ensures stability, and a unique extendable leg adapts to uneven terrain. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eWith a 36'' footprint, this stand combines strength and flexibility for your professional needs. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare maximum height, payload, riser count, stand-top format, footprint, and transport length before choosing a light stand. Products found while comparing light stand canada and film lighting may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE Aluminum Combo Triple Riser Stand 14'7\" is intended for studio and location lighting support building a dependable studio and location lighting support setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose a C-Stand when you need a grip arm and offset flag control, or a heavier combo stand when the fixture uses a junior pin and needs greater payload capacity.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE Aluminum Combo Triple Riser Stand 14'7\"\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: ATR14\u003c\/li\u003e\n\u003cli\u003eThe SHAPE Aluminum Triple Riser Combo Black Stand offers a robust solution for your equipment.\u003c\/li\u003e\n\u003cli\u003eWith a black anodized aluminum finish, it reaches a maximum height of 12.3' and supports up to 68 lbs.\u003c\/li\u003e\n\u003cli\u003eThe durable design features square legs and adjustable locking collars.\u003c\/li\u003e\n\u003cli\u003eThe Posi-V-Lock receiver with a 5\/8'' stud ensures stability, and a unique extendable leg adapts to uneven terrain.\u003c\/li\u003e\n\u003cli\u003eWith a 36'' footprint, this stand combines strength and flexibility for your professional needs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model ATR14 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model ATR14 is a professional light stand intended for studio and location lighting support. The SHAPE Aluminum Triple Riser Combo Black Stand offers a robust solution for your equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model ATR14?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model ATR14, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model ATR14?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model ATR14, With a black anodized aluminum finish, it reaches a maximum height of 12.3' and supports up to 68 lbs. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model ATR14?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model ATR14. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU ATR14 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model ATR14 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose a C-Stand when you need a grip arm and offset flag control, or a heavier combo stand when the fixture uses a junior pin and needs greater payload capacity. SHAPE model ATR14 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE Aluminum Combo Triple Riser Stand 14'7\" in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE Aluminum Combo Triple Riser Stand 14'7\" with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE Aluminum Combo Triple Riser Stand 14'7\" from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348398022915,"sku":"ATR14","price":192.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-aluminum-combo-triple-riser-stand-147-258616.jpg?v=1785412219"},{"product_id":"shape-arri-dovetail-plate-12-inches","title":"SHAPE ARRI Dovetail Plate 12 inches","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE ARRI Dovetail Plate 12 inches is a professional camera accessory for camera mounting, control, support, or production workflow whose setup calls for Use this ARRI Standard 12\" Dovetail Plate from SHAPE when balancing front- or back-heavy camera loads. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing camera accessories canada products and supports camera mounting, control, support, or production workflow when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eUse this ARRI Standard 12\" Dovetail Plate from SHAPE when balancing front- or back-heavy camera loads. The studio bridge plates 19 mm or 15 mm Arri standard (DPK19, DPK15) can easily slide onto the lightweight ARRI standard 12\" dovetail plate for additional leverage and mounting options. The aluminum, Teflon-coated design and tapered ARRI dovetail configuration allow your mounted equipment to slide back and forth easily.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eUse this ARRI Standard 12\" Dovetail Plate from SHAPE when balancing front- or back-heavy camera loads. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eThe studio bridge plates 19 mm or 15 mm Arri standard (DPK19, DPK15) can easily slide onto the lightweight ARRI standard 12\" dovetail plate for additional leverage and mounting options. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eThe aluminum, Teflon-coated design and tapered ARRI dovetail configuration allow your mounted equipment to slide back and forth easily. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eA stopper screw on one end and a safety latch on the other prevent your equipment from accidentally sliding off the plate. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eThere are twelve 1\/4\"-20 and five 3\/8\"-16 threads down the center of the plate for mounting. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this camera accessories canada. Products found while comparing camera rig and quick release plate may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE ARRI Dovetail Plate 12 inches is intended for camera mounting, control, support, or production workflow building a dependable camera mounting, control, support, or production workflow setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another accessory when the camera model, mount, thread, rod standard, connector, dimensions, or intended rig position differs from this product.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE ARRI Dovetail Plate 12 inches\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: DP12A\u003c\/li\u003e\n\u003cli\u003eUse this ARRI Standard 12\" Dovetail Plate from SHAPE when balancing front- or back-heavy camera loads.\u003c\/li\u003e\n\u003cli\u003eThe studio bridge plates 19 mm or 15 mm Arri standard (DPK19, DPK15) can easily slide onto the lightweight ARRI standard 12\" dovetail plate for additional leverage and mounting options.\u003c\/li\u003e\n\u003cli\u003eThe aluminum, Teflon-coated design and tapered ARRI dovetail configuration allow your mounted equipment to slide back and forth easily.\u003c\/li\u003e\n\u003cli\u003eA stopper screw on one end and a safety latch on the other prevent your equipment from accidentally sliding off the plate.\u003c\/li\u003e\n\u003cli\u003eThere are twelve 1\/4\"-20 and five 3\/8\"-16 threads down the center of the plate for mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model DP12A used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model DP12A is a professional camera accessory intended for camera mounting, control, support, or production workflow. Use this ARRI Standard 12\" Dovetail Plate from SHAPE when balancing front- or back-heavy camera loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model DP12A?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model DP12A, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model DP12A?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model DP12A, The studio bridge plates 19 mm or 15 mm Arri standard (DPK19, DPK15) can easily slide onto the lightweight ARRI standard 12\" dovetail plate for additional leverage and mounting options. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model DP12A?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model DP12A. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU DP12A to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model DP12A compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another accessory when the camera model, mount, thread, rod standard, connector, dimensions, or intended rig position differs from this product. SHAPE model DP12A is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE ARRI Dovetail Plate 12 inches in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE ARRI Dovetail Plate 12 inches with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE ARRI Dovetail Plate 12 inches from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348407689475,"sku":"DP12A","price":201.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-arri-dovetail-plate-12-inches-801807.jpg?v=1785412266"},{"product_id":"shape-arri-dovetail-plate-8-inches","title":"SHAPE ARRI Dovetail Plate 8 inches","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE ARRI Dovetail Plate 8 inches is a professional camera accessory for camera mounting, control, support, or production workflow whose setup calls for Introducing SHAPE's new ARRI Standard 8″ Dovetail Plate, facilitating easy balancing for front- or back-heavy camera loads. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing camera accessories canada products and supports camera mounting, control, support, or production workflow when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eIntroducing SHAPE's new ARRI Standard 8″ Dovetail Plate, facilitating easy balancing for front- or back-heavy camera loads. Compatible with studio bridgeplates in 19mm or 15mm Arri standard, its aluminum, Teflon-coated design ensures smooth sliding motion, while stopper screw and safety latch prevent accidental sliding.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eIntroducing SHAPE's new ARRI Standard 8″ Dovetail Plate, facilitating easy balancing for front- or back-heavy camera loads. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eCompatible with studio bridgeplates in 19mm or 15mm Arri standard, its aluminum, Teflon-coated design ensures smooth sliding motion, while stopper screw and safety latch prevent accidental sliding. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eWith ample mounting threads, it offers versatility for accessory attachment, enhancing your filming setup effortlessly. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eIts physical interface should be checked against the connected camera, lens, fixture, stand, or accessory before use. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this camera accessories canada. Products found while comparing camera rig and quick release plate may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE ARRI Dovetail Plate 8 inches is intended for camera mounting, control, support, or production workflow building a dependable camera mounting, control, support, or production workflow setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another accessory when the camera model, mount, thread, rod standard, connector, dimensions, or intended rig position differs from this product.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE ARRI Dovetail Plate 8 inches\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: DP8A\u003c\/li\u003e\n\u003cli\u003eIntroducing SHAPE's new ARRI Standard 8″ Dovetail Plate, facilitating easy balancing for front- or back-heavy camera loads.\u003c\/li\u003e\n\u003cli\u003eCompatible with studio bridgeplates in 19mm or 15mm Arri standard, its aluminum, Teflon-coated design ensures smooth sliding motion, while stopper screw and safety latch prevent accidental sliding.\u003c\/li\u003e\n\u003cli\u003eWith ample mounting threads, it offers versatility for accessory attachment, enhancing your filming setup effortlessly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model DP8A used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model DP8A is a professional camera accessory intended for camera mounting, control, support, or production workflow. Introducing SHAPE's new ARRI Standard 8″ Dovetail Plate, facilitating easy balancing for front- or back-heavy camera loads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model DP8A?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model DP8A, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model DP8A?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model DP8A, Compatible with studio bridgeplates in 19mm or 15mm Arri standard, its aluminum, Teflon-coated design ensures smooth sliding motion, while stopper screw and safety latch prevent accidental sliding. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model DP8A?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model DP8A. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU DP8A to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model DP8A compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another accessory when the camera model, mount, thread, rod standard, connector, dimensions, or intended rig position differs from this product. SHAPE model DP8A is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE ARRI Dovetail Plate 8 inches in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE ARRI Dovetail Plate 8 inches with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE ARRI Dovetail Plate 8 inches from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348408508675,"sku":"DP8A","price":105.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-arri-dovetail-plate-8-inches-337502.jpg?v=1785412273"},{"product_id":"shape-arri-dovetail-shoulder-mount","title":"SHAPE ARRI Dovetail Shoulder Mount","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE ARRI Dovetail Shoulder Mount is a camera shoulder rig for balanced handheld and shoulder-mounted production whose setup calls for The SHAPE ARRI Dovetail shoulder mount is compatible with ARRI style bridge plates in all three industry standards - 15mm LWS, 15mm Studio, and 19mm Studio. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing camera shoulder rig products and supports balanced handheld and shoulder-mounted production when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe SHAPE ARRI Dovetail shoulder mount is compatible with ARRI style bridge plates in all three industry standards - 15mm LWS, 15mm Studio, and 19mm Studio. The bridge plate slides front to back and locks in the desired position with the side lever. The same can be done with the pad underneath the dovetail section.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eThe SHAPE ARRI Dovetail shoulder mount is compatible with ARRI style bridge plates in all three industry standards - 15mm LWS, 15mm Studio, and 19mm Studio. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eThe bridge plate slides front to back and locks in the desired position with the side lever. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eThe same can be done with the pad underneath the dovetail section. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eSpring-loaded stoppers are included at the front and back of the shoulder mount to prevent the top bridge plate from sliding. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eTo release the bridge plate, simply push the button. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this camera shoulder rig. Products found while comparing camera rig and 15mm rods may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE ARRI Dovetail Shoulder Mount is intended for balanced handheld and shoulder-mounted production building a dependable balanced handheld and shoulder-mounted production setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose a smaller handheld cage when low weight matters most, or a heavier VCT and shoulder system when broadcast balance and rapid tripod docking are required.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE ARRI Dovetail Shoulder Mount\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: DOVSM\u003c\/li\u003e\n\u003cli\u003eThe SHAPE ARRI Dovetail shoulder mount is compatible with ARRI style bridge plates in all three industry standards - 15mm LWS, 15mm Studio, and 19mm Studio.\u003c\/li\u003e\n\u003cli\u003eThe bridge plate slides front to back and locks in the desired position with the side lever.\u003c\/li\u003e\n\u003cli\u003eThe same can be done with the pad underneath the dovetail section.\u003c\/li\u003e\n\u003cli\u003eSpring-loaded stoppers are included at the front and back of the shoulder mount to prevent the top bridge plate from sliding.\u003c\/li\u003e\n\u003cli\u003eTo release the bridge plate, simply push the button.\u003c\/li\u003e\n\u003cli\u003eThe dovetail section is 12-1\/2 inches long and allows 10-1\/2 inches of travel.\u003c\/li\u003e\n\u003cli\u003eThe SHAPE ARRI Dovetail shoulder mount provides stability and is compatible with a variety of our handles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model DOVSM used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model DOVSM is a camera shoulder rig intended for balanced handheld and shoulder-mounted production. The SHAPE ARRI Dovetail shoulder mount is compatible with ARRI style bridge plates in all three industry standards - 15mm LWS, 15mm Studio, and 19mm Studio.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model DOVSM?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model DOVSM, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model DOVSM?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model DOVSM, The bridge plate slides front to back and locks in the desired position with the side lever. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model DOVSM?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model DOVSM. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU DOVSM to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model DOVSM compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose a smaller handheld cage when low weight matters most, or a heavier VCT and shoulder system when broadcast balance and rapid tripod docking are required. SHAPE model DOVSM is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE ARRI Dovetail Shoulder Mount in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE ARRI Dovetail Shoulder Mount with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE ARRI Dovetail Shoulder Mount from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348410966275,"sku":"DOVSM","price":342.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-arri-dovetail-shoulder-mount-5752947.jpg?v=1785412290"},{"product_id":"shape-arri-dovetail-shoulder-mount-with-handles","title":"SHAPE ARRI Dovetail Shoulder Mount with Handles","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE ARRI Dovetail Shoulder Mount with Handles is a camera shoulder rig for balanced handheld and shoulder-mounted production whose setup calls for The SHAPE ARRI Dovetail shoulder mount is a versatile accessory compatible with ARRI style bridge plates in multiple industry standards, including 15mm LWS, 15mm Studio, and 19mm Studio. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing camera shoulder rig products and supports balanced handheld and shoulder-mounted production when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe SHAPE ARRI Dovetail shoulder mount is a versatile accessory compatible with ARRI style bridge plates in multiple industry standards, including 15mm LWS, 15mm Studio, and 19mm Studio. It offers adjustable front-to-back sliding of the bridge plate and a pad underneath, both secured with side levers and spring-loaded stoppers.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eThe SHAPE ARRI Dovetail shoulder mount is a versatile accessory compatible with ARRI style bridge plates in multiple industry standards, including 15mm LWS, 15mm Studio, and 19mm Studio. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eIt offers adjustable front-to-back sliding of the bridge plate and a pad underneath, both secured with side levers and spring-loaded stoppers. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eThe dovetail section allows 10-½ inches of travel, ensuring stability. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eAdditionally, it is compatible with various handles, including a pair of ARRI Rosette-compatible handgrips with three points of articulation, offering flexible configurations. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eSHAPE's patented Push-button handle technology allows for easy adjustment and precise positioning of the rubber handgrips, making it a popular choice among professionals in the industry. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this camera shoulder rig. Products found while comparing camera rig and 15mm rods may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE ARRI Dovetail Shoulder Mount with Handles is intended for balanced handheld and shoulder-mounted production building a dependable balanced handheld and shoulder-mounted production setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose a smaller handheld cage when low weight matters most, or a heavier VCT and shoulder system when broadcast balance and rapid tripod docking are required.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE ARRI Dovetail Shoulder Mount with Handles\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: HSMDV\u003c\/li\u003e\n\u003cli\u003eThe SHAPE ARRI Dovetail shoulder mount is a versatile accessory compatible with ARRI style bridge plates in multiple industry standards, including 15mm LWS, 15mm Studio, and 19mm Studio.\u003c\/li\u003e\n\u003cli\u003eIt offers adjustable front-to-back sliding of the bridge plate and a pad underneath, both secured with side levers and spring-loaded stoppers.\u003c\/li\u003e\n\u003cli\u003eThe dovetail section allows 10-½ inches of travel, ensuring stability.\u003c\/li\u003e\n\u003cli\u003eAdditionally, it is compatible with various handles, including a pair of ARRI Rosette-compatible handgrips with three points of articulation, offering flexible configurations.\u003c\/li\u003e\n\u003cli\u003eSHAPE's patented Push-button handle technology allows for easy adjustment and precise positioning of the rubber handgrips, making it a popular choice among professionals in the industry.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model HSMDV used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model HSMDV is a camera shoulder rig intended for balanced handheld and shoulder-mounted production. The SHAPE ARRI Dovetail shoulder mount is a versatile accessory compatible with ARRI style bridge plates in multiple industry standards, including 15mm LWS, 15mm Studio, and 19mm Studio.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model HSMDV?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model HSMDV, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model HSMDV?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model HSMDV, It offers adjustable front-to-back sliding of the bridge plate and a pad underneath, both secured with side levers and spring-loaded stoppers. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model HSMDV?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model HSMDV. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU HSMDV to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model HSMDV compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose a smaller handheld cage when low weight matters most, or a heavier VCT and shoulder system when broadcast balance and rapid tripod docking are required. SHAPE model HSMDV is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE ARRI Dovetail Shoulder Mount with Handles in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE ARRI Dovetail Shoulder Mount with Handles with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE ARRI Dovetail Shoulder Mount with Handles from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348415291651,"sku":"HSMDV","price":782.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-arri-dovetail-shoulder-mount-with-handles-147442.jpg?v=1785412306"},{"product_id":"shape-baseplate-2-0-for-dslr-kirk-neff","title":"SHAPE Baseplate 2.0 for DSLR Kirk Neff","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE Baseplate 2.0 for DSLR Kirk Neff is a camera baseplate and rod-support component for camera mounting, lens support, matte box, and follow-focus builds whose setup calls for Discover the DSLR Kirk Neff Baseplate 2.0 from SHAPE, designed for DSLR cameras. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing camera baseplate products and supports camera mounting, lens support, matte box, and follow-focus builds when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eDiscover the DSLR Kirk Neff Baseplate 2.0 from SHAPE, designed for DSLR cameras. This 15 mm rod baseplate uses a V-lock quick-release system, ensuring precise alignment and balance adjustments. SHAPE Baseplate 2.0 for DSLR Kirk Neff is designed for camera mounting, lens support, matte box, and follow-focus builds. Its model-specific dimensions, interfaces, compatibility, and included configuration should be matched to the surrounding production setup before ordering.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eDiscover the DSLR Kirk Neff Baseplate 2.0 from SHAPE, designed for DSLR cameras. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eThis 15 mm rod baseplate uses a V-lock quick-release system, ensuring precise alignment and balance adjustments. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eThe camera baseplate and rod-support component format is intended for camera mounting, lens support, matte box, and follow-focus builds. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eIts physical interface should be checked against the connected camera, lens, fixture, stand, or accessory before use. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this camera baseplate. Products found while comparing camera rig and 15mm rods may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE Baseplate 2.0 for DSLR Kirk Neff is intended for camera mounting, lens support, matte box, and follow-focus builds building a dependable camera mounting, lens support, matte box, and follow-focus builds setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another baseplate when your camera body, rod height, 15 mm or 19 mm standard, dovetail, or tripod interface differs from this model.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE Baseplate 2.0 for DSLR Kirk Neff\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: DSLRKNBPLT2.0\u003c\/li\u003e\n\u003cli\u003eDiscover the DSLR Kirk Neff Baseplate 2.0 from SHAPE, designed for DSLR cameras.\u003c\/li\u003e\n\u003cli\u003eThis 15 mm rod baseplate uses a V-lock quick-release system, ensuring precise alignment and balance adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model DSLRKNBPLT2.0 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model DSLRKNBPLT2.0 is a camera baseplate and rod-support component intended for camera mounting, lens support, matte box, and follow-focus builds. Discover the DSLR Kirk Neff Baseplate 2.0 from SHAPE, designed for DSLR cameras.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model DSLRKNBPLT2.0?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model DSLRKNBPLT2.0, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model DSLRKNBPLT2.0?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model DSLRKNBPLT2.0, This 15 mm rod baseplate uses a V-lock quick-release system, ensuring precise alignment and balance adjustments. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model DSLRKNBPLT2.0?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model DSLRKNBPLT2.0. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU DSLRKNBPLT2.0 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model DSLRKNBPLT2.0 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another baseplate when your camera body, rod height, 15 mm or 19 mm standard, dovetail, or tripod interface differs from this model. SHAPE model DSLRKNBPLT2.0 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE Baseplate 2.0 for DSLR Kirk Neff in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE Baseplate 2.0 for DSLR Kirk Neff with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE Baseplate 2.0 for DSLR Kirk Neff from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348416176387,"sku":"DSLRKNBPLT2.0","price":173.44,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-baseplate-20-for-dslr-kirk-neff-724148.jpg?v=1785412313"},{"product_id":"shape-blackmagic-cinema-camera-6k-6k-pro-6k-g2-camera-cage","title":"SHAPE Blackmagic Cinema Camera 6K\/6K PRO\/6K G2 Camera Cage","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE Blackmagic Cinema Camera 6K\/6K PRO\/6K G2 Camera Cage is a camera cage and mounting platform for camera protection, accessory mounting, and production rigging whose setup calls for Introducing SHAPE's newest cage designed exclusively for the Blackmagic Cinema Camera 6K\/6K Pro\/6K G2. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing camera cage products and supports camera protection, accessory mounting, and production rigging when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eIntroducing SHAPE's newest cage designed exclusively for the Blackmagic Cinema Camera 6K\/6K Pro\/6K G2. Crafted from durable aluminum, this formfitting cage provides a secure fit while offering easy access to camera controls. With multiple mounting options including threaded holes, Arca-style plate, NATO rail, and cold shoe attachments, alongside optional accessories such as the HDMI \/ USB-C Protector Clamp, ARRI Locating Top Handle, and SSD Bracket Mount, this cage caters to the diverse needs of professional filmmakers and passionate videographers, ensuring both versatility and protection for your Blackmagic Cinema Camera setup.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eIntroducing SHAPE's newest cage designed exclusively for the Blackmagic Cinema Camera 6K\/6K Pro\/6K G2. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eCrafted from durable aluminum, this formfitting cage provides a secure fit while offering easy access to camera controls. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eWith multiple mounting options including threaded holes, Arca-style plate, NATO rail, and cold shoe attachments, alongside optional accessories such as the HDMI \/ USB-C Protector Clamp, ARRI Locating Top Handle, and SSD Bracket Mount, this cage caters to the diverse needs of professional filmmakers and passionate videographers, ensuring both versatility and protection for your Blackmagic Cinema Camera setup. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eIts physical interface should be checked against the connected camera, lens, fixture, stand, or accessory before use. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact camera fit, port and battery access, top-handle inclusion, rod support, viewfinder mounting, and accessory threads before choosing a cage package. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE Blackmagic Cinema Camera 6K\/6K PRO\/6K G2 Camera Cage is intended for camera protection, accessory mounting, and production rigging building a dependable camera protection, accessory mounting, and production rigging setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another cage when your exact camera body, battery door, port layout, cooling clearance, or accessory-mounting needs differ from the models named for this product.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE Blackmagic Cinema Camera 6K\/6K PRO\/6K G2 Camera Cage\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: BM6KC\u003c\/li\u003e\n\u003cli\u003eIntroducing SHAPE's newest cage designed exclusively for the Blackmagic Cinema Camera 6K\/6K Pro\/6K G2.\u003c\/li\u003e\n\u003cli\u003eCrafted from durable aluminum, this formfitting cage provides a secure fit while offering easy access to camera controls.\u003c\/li\u003e\n\u003cli\u003eWith multiple mounting options including threaded holes, Arca-style plate, NATO rail, and cold shoe attachments, alongside optional accessories such as the HDMI \/ USB-C Protector Clamp, ARRI Locating Top Handle, and SSD Bracket Mount, this cage caters to the diverse needs of professional filmmakers and passionate videographers, ensuring both versatility and protection for your Blackmagic Cinema Camera setup.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model BM6KC used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model BM6KC is a camera cage and mounting platform intended for camera protection, accessory mounting, and production rigging. Introducing SHAPE's newest cage designed exclusively for the Blackmagic Cinema Camera 6K\/6K Pro\/6K G2.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model BM6KC?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model BM6KC, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model BM6KC?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model BM6KC, Crafted from durable aluminum, this formfitting cage provides a secure fit while offering easy access to camera controls. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model BM6KC?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model BM6KC. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU BM6KC to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model BM6KC compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another cage when your exact camera body, battery door, port layout, cooling clearance, or accessory-mounting needs differ from the models named for this product. SHAPE model BM6KC is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE Blackmagic Cinema Camera 6K\/6K PRO\/6K G2 Camera Cage in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE Blackmagic Cinema Camera 6K\/6K PRO\/6K G2 Camera Cage with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE Blackmagic Cinema Camera 6K\/6K PRO\/6K G2 Camera Cage from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348420501763,"sku":"BM6KC","price":98.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-camera-cage-for-blackmagic-cinema-camera-6k6k-pro6k-g2-661878.jpg?v=1785412331"},{"product_id":"shape-blackmagic-cinema-camera-6k-6k-pro-6k-g2-camera-cage-with-top-handle","title":"SHAPE Blackmagic Cinema Camera 6K\/6K PRO\/6K G2 Camera Cage with Top Handle","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE Blackmagic Cinema Camera 6K\/6K PRO\/6K G2 Camera Cage with Top Handle is a camera cage and mounting platform for camera protection, accessory mounting, and production rigging whose setup calls for Discover the Shape cage for Blackmagic Cinema Camera 6K\/6K Pro\/6K G2 with top handle. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing camera cage products and supports camera protection, accessory mounting, and production rigging when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eDiscover the Shape cage for Blackmagic Cinema Camera 6K\/6K Pro\/6K G2 with top handle. This aluminum cage provides versatile mounting for your camera, featuring an ARRI Locating Top Handle and included protections for HDMI\/USB-C ports. Compatible with Arca for quick mounting on a plate or gimbal, it also offers mounting options for accessories and an optional battery extension.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eDiscover the Shape cage for Blackmagic Cinema Camera 6K\/6K Pro\/6K G2 with top handle. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eThis aluminum cage provides versatile mounting for your camera, featuring an ARRI Locating Top Handle and included protections for HDMI\/USB-C ports. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eCompatible with Arca for quick mounting on a plate or gimbal, it also offers mounting options for accessories and an optional battery extension. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eSturdy and durable, this cage is the ideal accessory to customize your setup according to your needs. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact camera fit, port and battery access, top-handle inclusion, rod support, viewfinder mounting, and accessory threads before choosing a cage package. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE Blackmagic Cinema Camera 6K\/6K PRO\/6K G2 Camera Cage with Top Handle is intended for camera protection, accessory mounting, and production rigging building a dependable camera protection, accessory mounting, and production rigging setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another cage when your exact camera body, battery door, port layout, cooling clearance, or accessory-mounting needs differ from the models named for this product.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE Blackmagic Cinema Camera 6K\/6K PRO\/6K G2 Camera Cage with Top Handle\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: BM6KTH\u003c\/li\u003e\n\u003cli\u003eDiscover the Shape cage for Blackmagic Cinema Camera 6K\/6K Pro\/6K G2 with top handle.\u003c\/li\u003e\n\u003cli\u003eThis aluminum cage provides versatile mounting for your camera, featuring an ARRI Locating Top Handle and included protections for HDMI\/USB-C ports.\u003c\/li\u003e\n\u003cli\u003eCompatible with Arca for quick mounting on a plate or gimbal, it also offers mounting options for accessories and an optional battery extension.\u003c\/li\u003e\n\u003cli\u003eSturdy and durable, this cage is the ideal accessory to customize your setup according to your needs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model BM6KTH used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model BM6KTH is a camera cage and mounting platform intended for camera protection, accessory mounting, and production rigging. Discover the Shape cage for Blackmagic Cinema Camera 6K\/6K Pro\/6K G2 with top handle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model BM6KTH?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model BM6KTH, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model BM6KTH?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model BM6KTH, This aluminum cage provides versatile mounting for your camera, featuring an ARRI Locating Top Handle and included protections for HDMI\/USB-C ports. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model BM6KTH?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model BM6KTH. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU BM6KTH to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model BM6KTH compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another cage when your exact camera body, battery door, port layout, cooling clearance, or accessory-mounting needs differ from the models named for this product. SHAPE model BM6KTH is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE Blackmagic Cinema Camera 6K\/6K PRO\/6K G2 Camera Cage with Top Handle in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE Blackmagic Cinema Camera 6K\/6K PRO\/6K G2 Camera Cage with Top Handle with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE Blackmagic Cinema Camera 6K\/6K PRO\/6K G2 Camera Cage with Top Handle from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348426334467,"sku":"BM6KTH","price":263.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-camera-cage-with-top-handle-for-blackmagic-cinema-camera-6k6k-pro6k-g2-203931.jpg?v=1785412349"},{"product_id":"shape-blackmagic-cinema-camera-6k-6k-pro-6k-g2-camera-cage-top-handle-and-rod-bloc-system","title":"SHAPE Blackmagic Cinema Camera 6K\/6K PRO\/6K G2 Camera Cage, Top Handle and Rod Bloc System","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE Blackmagic Cinema Camera 6K\/6K PRO\/6K G2 Camera Cage, Top Handle and Rod Bloc System is a camera cage and mounting platform for camera protection, accessory mounting, and production rigging whose setup calls for Discover the Shape cage for Blackmagic Cinema Camera 6K\/6K Pro\/6K G2, featuring a top handle and 15mm LWS rod system. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing camera cage products and supports camera protection, accessory mounting, and production rigging when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eDiscover the Shape cage for Blackmagic Cinema Camera 6K\/6K Pro\/6K G2, featuring a top handle and 15mm LWS rod system. This precision-machined aluminum cage provides versatile mounting options for your camera, including a base plate for 15mm LWS rod system. The ARRI Locating top handle and protection system for HDMI\/USB-C ports are also included.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eDiscover the Shape cage for Blackmagic Cinema Camera 6K\/6K Pro\/6K G2, featuring a top handle and 15mm LWS rod system. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eThis precision-machined aluminum cage provides versatile mounting options for your camera, including a base plate for 15mm LWS rod system. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eThe ARRI Locating top handle and protection system for HDMI\/USB-C ports are also included. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eCompatible with Arca for quick mounting on a tripod or gimbal, this cage offers numerous accessory mounting options, as well as an optional camera battery extension. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eCrafted from CNC aluminum, it is sturdy and durable, with three mounting points to prevent camera movement during use. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact camera fit, port and battery access, top-handle inclusion, rod support, viewfinder mounting, and accessory threads before choosing a cage package. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE Blackmagic Cinema Camera 6K\/6K PRO\/6K G2 Camera Cage, Top Handle and Rod Bloc System is intended for camera protection, accessory mounting, and production rigging building a dependable camera protection, accessory mounting, and production rigging setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another cage when your exact camera body, battery door, port layout, cooling clearance, or accessory-mounting needs differ from the models named for this product.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE Blackmagic Cinema Camera 6K\/6K PRO\/6K G2 Camera Cage, Top Handle and Rod Bloc System\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: BM6KROD\u003c\/li\u003e\n\u003cli\u003eDiscover the Shape cage for Blackmagic Cinema Camera 6K\/6K Pro\/6K G2, featuring a top handle and 15mm LWS rod system.\u003c\/li\u003e\n\u003cli\u003eThis precision-machined aluminum cage provides versatile mounting options for your camera, including a base plate for 15mm LWS rod system.\u003c\/li\u003e\n\u003cli\u003eThe ARRI Locating top handle and protection system for HDMI\/USB-C ports are also included.\u003c\/li\u003e\n\u003cli\u003eCompatible with Arca for quick mounting on a tripod or gimbal, this cage offers numerous accessory mounting options, as well as an optional camera battery extension.\u003c\/li\u003e\n\u003cli\u003eCrafted from CNC aluminum, it is sturdy and durable, with three mounting points to prevent camera movement during use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model BM6KROD used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model BM6KROD is a camera cage and mounting platform intended for camera protection, accessory mounting, and production rigging. Discover the Shape cage for Blackmagic Cinema Camera 6K\/6K Pro\/6K G2, featuring a top handle and 15mm LWS rod system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model BM6KROD?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model BM6KROD, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model BM6KROD?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model BM6KROD, This precision-machined aluminum cage provides versatile mounting options for your camera, including a base plate for 15mm LWS rod system. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model BM6KROD?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model BM6KROD. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU BM6KROD to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model BM6KROD compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another cage when your exact camera body, battery door, port layout, cooling clearance, or accessory-mounting needs differ from the models named for this product. SHAPE model BM6KROD is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE Blackmagic Cinema Camera 6K\/6K PRO\/6K G2 this product, Top Handle and Rod Bloc System in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE Blackmagic Cinema Camera 6K\/6K PRO\/6K G2 this product, Top Handle and Rod Bloc System with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE Blackmagic Cinema Camera 6K\/6K PRO\/6K G2 this product, Top Handle and Rod Bloc System from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348429054211,"sku":"BM6KROD","price":439.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-camera-cage-top-handle-and-rod-bloc-system-for-blackmagic-cinema-camera-6k6k-pro6k-g2-486762.jpg?v=1785412366"},{"product_id":"shape-blackmagic-pyxis-6k-cage","title":"SHAPE Blackmagic PYXIS 6K Cage","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE Blackmagic PYXIS 6K Cage is a camera cage and mounting platform for camera protection, accessory mounting, and production rigging whose setup calls for The SHAPE Cage for Blackmagic PYXIS 6K is a robust and versatile accessory designed to enhance your camera setup. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing camera cage products and supports camera protection, accessory mounting, and production rigging when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe SHAPE Cage for Blackmagic PYXIS 6K is a robust and versatile accessory designed to enhance your camera setup. It includes a Top Plate with two NATO Side Arms, providing ample options for accessory attachment. The ergonomic Side Plate further expands your accessory mounting possibilities, ensuring you have all the tools you need at your fingertips.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eThe SHAPE Cage for Blackmagic PYXIS 6K is a robust and versatile accessory designed to enhance your camera setup. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eIt includes a Top Plate with two NATO Side Arms, providing ample options for accessory attachment. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eThe ergonomic Side Plate further expands your accessory mounting possibilities, ensuring you have all the tools you need at your fingertips. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eKey Features: · Top Plate with two NATO side arms: Features several ¼-20 \u0026amp; 3\/8-16 ARRI anti-rotating threaded holes on top, in front \u0026amp; on each side for accessory attachment. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003e· Ergonomic Side plate with ARRI Rosette: Specifically designed to be attached on the side of the camera body, it features several ¼-20 \u0026amp; 3\/8-16 ARRI anti-rotation threaded holes and an ARRI Rosette mounting point for handgrips \u0026amp; extension handle attachment. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact camera fit, port and battery access, top-handle inclusion, rod support, viewfinder mounting, and accessory threads before choosing a cage package. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE Blackmagic PYXIS 6K Cage is intended for camera protection, accessory mounting, and production rigging building a dependable camera protection, accessory mounting, and production rigging setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another cage when your exact camera body, battery door, port layout, cooling clearance, or accessory-mounting needs differ from the models named for this product.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE Blackmagic PYXIS 6K Cage\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: PYXCAGE\u003c\/li\u003e\n\u003cli\u003eThe SHAPE Cage for Blackmagic PYXIS 6K is a robust and versatile accessory designed to enhance your camera setup.\u003c\/li\u003e\n\u003cli\u003eIt includes a Top Plate with two NATO Side Arms, providing ample options for accessory attachment.\u003c\/li\u003e\n\u003cli\u003eThe ergonomic Side Plate further expands your accessory mounting possibilities, ensuring you have all the tools you need at your fingertips.\u003c\/li\u003e\n\u003cli\u003eKey Features: · Top Plate with two NATO side arms: Features several ¼-20 \u0026amp; 3\/8-16 ARRI anti-rotating threaded holes on top, in front \u0026amp; on each side for accessory attachment.\u003c\/li\u003e\n\u003cli\u003e· Ergonomic Side plate with ARRI Rosette: Specifically designed to be attached on the side of the camera body, it features several ¼-20 \u0026amp; 3\/8-16 ARRI anti-rotation threaded holes and an ARRI Rosette mounting point for handgrips \u0026amp; extension handle attachment.\u003c\/li\u003e\n\u003cli\u003eIt also Includes two Velcro Straps to secure Smartphone \/ Hard drive \/ Audio equipment attachment.\u003c\/li\u003e\n\u003cli\u003eCompatibility with Handles: This top plate is designed to accommodate both SHAPE and Blackmagic factory top handles, offering you the flexibility to choose the handle that best suits your needs.\u003c\/li\u003e\n\u003cli\u003eNATO Side Arms: The plate allows for the attachment of two NATO Side Arms, further expanding your options for accessory attachment and customization.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model PYXCAGE used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model PYXCAGE is a camera cage and mounting platform intended for camera protection, accessory mounting, and production rigging. The SHAPE Cage for Blackmagic PYXIS 6K is a robust and versatile accessory designed to enhance your camera setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model PYXCAGE?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model PYXCAGE, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model PYXCAGE?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model PYXCAGE, It includes a Top Plate with two NATO Side Arms, providing ample options for accessory attachment. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model PYXCAGE?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model PYXCAGE. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU PYXCAGE to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model PYXCAGE compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another cage when your exact camera body, battery door, port layout, cooling clearance, or accessory-mounting needs differ from the models named for this product. SHAPE model PYXCAGE is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE Blackmagic PYXIS 6K Cage in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE Blackmagic PYXIS 6K Cage with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE Blackmagic PYXIS 6K Cage from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348430070019,"sku":"PYXCAGE","price":175.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-cage-for-blackmagic-pyxis-6k-713840.jpg?v=1785412376"},{"product_id":"shape-blackmagic-pyxis-6k-d-tap-power-cable","title":"SHAPE Blackmagic PYXIS 6K D-Tap Power Cable","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE Blackmagic PYXIS 6K D-Tap Power Cable is a camera power cable for camera, monitor, and accessory power workflows whose setup calls for SHAPE's D-Tap to 2-pin LEMO-type connector Power Cable for Blackmagic PYXIS 6K will allow the user to power the Blackmagic PYXIS 6K camera when connected to a D-Tap connector source, either on a battery plate or directly onto a battery-type power source. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing D-Tap power cable products and supports camera, monitor, and accessory power workflows when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eSHAPE's D-Tap to 2-pin LEMO-type connector Power Cable for Blackmagic PYXIS 6K will allow the user to power the Blackmagic PYXIS 6K camera when connected to a D-Tap connector source, either on a battery plate or directly onto a battery-type power source. At 11 1\/4'' \/ 28.5 cm long, this cable will ensure a safe power connection between a battery plate system or a battery power source.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eSHAPE's D-Tap to 2-pin LEMO-type connector Power Cable for Blackmagic PYXIS 6K will allow the user to power the Blackmagic PYXIS 6K camera when connected to a D-Tap connector source, either on a battery plate or directly onto a battery-type power source. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eAt 11 1\/4'' \/ 28.5 cm long, this cable will ensure a safe power connection between a battery plate system or a battery power source. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eThe camera power cable format is intended for camera, monitor, and accessory power workflows. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eIts physical interface should be checked against the connected camera, lens, fixture, stand, or accessory before use. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare battery-side connector, device-side connector, voltage range, regulation, cable length, and connector angle before choosing a power cable. Products found while comparing camera power cable and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE Blackmagic PYXIS 6K D-Tap Power Cable is intended for camera, monitor, and accessory power workflows building a dependable camera, monitor, and accessory power workflows setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another power cable when the battery-side connector, device-side connector, voltage range, cable length, or required regulation differs from this model.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE Blackmagic PYXIS 6K D-Tap Power Cable\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: PYXPC\u003c\/li\u003e\n\u003cli\u003eSHAPE's D-Tap to 2-pin LEMO-type connector Power Cable for Blackmagic PYXIS 6K will allow the user to power the Blackmagic PYXIS 6K camera when connected to a D-Tap connector source, either on a battery plate or directly onto a battery-type power source.\u003c\/li\u003e\n\u003cli\u003eAt 11 1\/4'' \/ 28.5 cm long, this cable will ensure a safe power connection between a battery plate system or a battery power source.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model PYXPC used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model PYXPC is a camera power cable intended for camera, monitor, and accessory power workflows. SHAPE's D-Tap to 2-pin LEMO-type connector Power Cable for Blackmagic PYXIS 6K will allow the user to power the Blackmagic PYXIS 6K camera when connected to a D-Tap connector input, either on a battery plate or directly onto a battery-type power input.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model PYXPC?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model PYXPC, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model PYXPC?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model PYXPC, At 11 1\/4'' \/ 28.5 cm long, this cable will ensure a safe power connection between a battery plate system or a battery power input. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model PYXPC?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model PYXPC. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU PYXPC to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model PYXPC compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another power cable when the battery-side connector, device-side connector, voltage range, cable length, or required regulation differs from this model. SHAPE model PYXPC is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE Blackmagic PYXIS 6K D-Tap Power Cable in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE Blackmagic PYXIS 6K this product with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE Blackmagic PYXIS 6K this product from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348431216899,"sku":"PYXPC","price":69.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-d-tap-power-cable-for-blackmagic-pyxis-6k-944769.jpg?v=1785412384"},{"product_id":"shape-blackmagic-pyxis-6k-side-plate-with-rosette","title":"SHAPE Blackmagic PYXIS 6K Side Plate with Rosette","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE Blackmagic PYXIS 6K Side Plate with Rosette is a camera cage and mounting platform for camera protection, accessory mounting, and production rigging whose setup calls for Introducing the SHAPE Side Plate with ARRI Rosette for Blackmagic PYXIS 6K. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing camera cage products and supports camera protection, accessory mounting, and production rigging when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eIntroducing the SHAPE Side Plate with ARRI Rosette for Blackmagic PYXIS 6K. This versatile accessory is designed to attach seamlessly to the right side of your camera body, enhancing your setup with multiple features: Attachment Points: Equipped with several ¼-20 and 3\/8-16 ARRI anti-rotating threaded holes, this side plate allows for secure and flexible accessory attachment.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eIntroducing the SHAPE Side Plate with ARRI Rosette for Blackmagic PYXIS 6K. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eThis versatile accessory is designed to attach seamlessly to the right side of your camera body, enhancing your setup with multiple features: Attachment Points: Equipped with several ¼-20 and 3\/8-16 ARRI anti-rotating threaded holes, this side plate allows for secure and flexible accessory attachment. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eVelcro Straps Included: Comes with two Velcro straps to securely attach your smartphone, hard drive, or audio equipment, ensuring everything stays in place. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eDurable Construction: Made from high-quality CNC aluminum, this side plate is built to last and withstand the rigors of professional use. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eComplete Package: Includes four attachment screws for easy and secure installation. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact camera fit, port and battery access, top-handle inclusion, rod support, viewfinder mounting, and accessory threads before choosing a cage package. Products found while comparing camera rig and camera accessories canada may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE Blackmagic PYXIS 6K Side Plate with Rosette is intended for camera protection, accessory mounting, and production rigging building a dependable camera protection, accessory mounting, and production rigging setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another cage when your exact camera body, battery door, port layout, cooling clearance, or accessory-mounting needs differ from the models named for this product.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE Blackmagic PYXIS 6K Side Plate with Rosette\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: PYXSPR\u003c\/li\u003e\n\u003cli\u003eIntroducing the SHAPE Side Plate with ARRI Rosette for Blackmagic PYXIS 6K.\u003c\/li\u003e\n\u003cli\u003eThis versatile accessory is designed to attach seamlessly to the right side of your camera body, enhancing your setup with multiple features: Attachment Points: Equipped with several ¼-20 and 3\/8-16 ARRI anti-rotating threaded holes, this side plate allows for secure and flexible accessory attachment.\u003c\/li\u003e\n\u003cli\u003eVelcro Straps Included: Comes with two Velcro straps to securely attach your smartphone, hard drive, or audio equipment, ensuring everything stays in place.\u003c\/li\u003e\n\u003cli\u003eDurable Construction: Made from high-quality CNC aluminum, this side plate is built to last and withstand the rigors of professional use.\u003c\/li\u003e\n\u003cli\u003eComplete Package: Includes four attachment screws for easy and secure installation.\u003c\/li\u003e\n\u003cli\u003eUpgrade your Blackmagic PYXIS 6K with this robust and versatile side plate, and take your filmmaking to the next level!\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model PYXSPR used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model PYXSPR is a camera cage and mounting platform intended for camera protection, accessory mounting, and production rigging. Introducing the SHAPE Side Plate with ARRI Rosette for Blackmagic PYXIS 6K.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model PYXSPR?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model PYXSPR, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model PYXSPR?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model PYXSPR, This versatile accessory is designed to attach seamlessly to the right side of your camera body, enhancing your setup with multiple features: Attachment Points: Equipped with several ¼-20 and 3\/8-16 ARRI anti-rotating threaded holes, this side plate allows for secure and flexible accessory attachment. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model PYXSPR?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model PYXSPR. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU PYXSPR to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model PYXSPR compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another cage when your exact camera body, battery door, port layout, cooling clearance, or accessory-mounting needs differ from the models named for this product. SHAPE model PYXSPR is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE Blackmagic PYXIS 6K Side Plate with Rosette in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE Blackmagic PYXIS 6K Side Plate with Rosette with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE Blackmagic PYXIS 6K Side Plate with Rosette from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348433412355,"sku":"PYXSPR","price":60.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-side-plate-rosette-for-blackmagic-pyxis-6k-854960.jpg?v=1785412395"},{"product_id":"shape-boom-arm-light-stand","title":"SHAPE Boom Arm for Light Stand","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE Boom Arm for Light Stand is a boom arm and grip support for overhead lights, microphones, modifiers, and grip accessories whose setup calls for Designed for professional film, television, and studio environments, this versatile boom arm provides a reliable solution for overhead lighting, microphone placement, and mounting a wide range of production accessories. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing boom arm products and supports overhead lights, microphones, modifiers, and grip accessories when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eDesigned for professional film, television, and studio environments, this versatile boom arm provides a reliable solution for overhead lighting, microphone placement, and mounting a wide range of production accessories. Its robust construction ensures stability while allowing precise positioning, making it an essential tool for controlled studio setups and dynamic on-set workflows.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eDesigned for professional film, television, and studio environments, this versatile this product provides a reliable solution for overhead lighting, microphone placement, and mounting a wide range of production accessories. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eIts robust construction ensures stability while allowing precise positioning, making it an essential tool for controlled studio setups and dynamic on-set workflows. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eThe Boom Arm features an adjustable pivot clamp with an ergonomic ratcheting handle, allowing quick, secure angle adjustments without compromising stability. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eThis system ensures effortless positioning while keeping mounted equipment firmly in place, even during extended shoots. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFor enhanced balance and safety, a durable steel ring is integrated at the end of the arm, making it easy to attach counterweights or sandbags. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this boom arm. Products found while comparing light stand and film lighting may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE Boom Arm for Light Stand is intended for overhead lights, microphones, modifiers, and grip accessories building a dependable overhead lights, microphones, modifiers, and grip accessories setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose a straight stand when overhead reach is unnecessary, or a heavier boom system when the payload and counterweight requirements exceed this arm's intended setup.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE Boom Arm for Light Stand\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: LWBA\u003c\/li\u003e\n\u003cli\u003eDesigned for professional film, television, and studio environments, this versatile this product provides a reliable solution for overhead lighting, microphone placement, and mounting a wide range of production accessories.\u003c\/li\u003e\n\u003cli\u003eIts robust construction ensures stability while allowing precise positioning, making it an essential tool for controlled studio setups and dynamic on-set workflows.\u003c\/li\u003e\n\u003cli\u003eThe Boom Arm features an adjustable pivot clamp with an ergonomic ratcheting handle, allowing quick, secure angle adjustments without compromising stability.\u003c\/li\u003e\n\u003cli\u003eThis system ensures effortless positioning while keeping mounted equipment firmly in place, even during extended shoots.\u003c\/li\u003e\n\u003cli\u003eFor enhanced balance and safety, a durable steel ring is integrated at the end of the arm, making it easy to attach counterweights or sandbags.\u003c\/li\u003e\n\u003cli\u003eThis added support helps maintain stability when working with heavier lighting fixtures or audio gear.\u003c\/li\u003e\n\u003cli\u003eWith a maximum extension of 76 inches (193 cm) and a compact minimum length of 47 3\/8 inches (120.3 cm), the boom arm offers excellent reach while remaining manageable in tighter setups.\u003c\/li\u003e\n\u003cli\u003eIts adaptable top head includes a removable spigot that can be installed in three different positions, providing maximum mounting flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model LWBA used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model LWBA is a boom arm and grip support intended for overhead lights, microphones, modifiers, and grip accessories. Designed for professional film, television, and studio environments, this versatile this product provides a reliable solution for overhead lighting, microphone placement, and mounting a wide range of production accessories.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model LWBA?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model LWBA, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model LWBA?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model LWBA, Its robust construction ensures stability while allowing precise positioning, making it an essential tool for controlled studio setups and dynamic on-set workflows. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model LWBA?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model LWBA. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU LWBA to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model LWBA compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose a straight stand when overhead reach is unnecessary, or a heavier boom system when the payload and counterweight requirements exceed this arm's intended setup. SHAPE model LWBA is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE Boom Arm for Light Stand in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE Boom Arm for Light Stand with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE Boom Arm for Light Stand from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348438393091,"sku":"LWBA","price":74.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-boom-arm-for-light-stand-7996036.jpg?v=1785412412"},{"product_id":"shape-bridge-plate-15-mm-studio-arri-standard","title":"SHAPE Bridge Plate 15 mm Studio ARRI Standard","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE Bridge Plate 15 mm Studio ARRI Standard is a camera baseplate and rod-support component for camera mounting, lens support, matte box, and follow-focus builds whose setup calls for Enhance your camera rig with the SHAPE Bridge Plate 15mm Studio ARRI Standard. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing camera baseplate products and supports camera mounting, lens support, matte box, and follow-focus builds when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eEnhance your camera rig with the SHAPE Bridge Plate 15mm Studio ARRI Standard. Crafted from durable CNC aluminum, this bridge plate easily attaches to ARRI standard dovetail plates for added support. It includes two 12\" 15mm rods and offers versatile mounting options with 1\/4\"-20 and 3\/8\"-16 screws. Secure your setup with locking levers and enjoy precise positioning.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eEnhance your camera rig with the SHAPE Bridge Plate 15mm Studio ARRI Standard. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eCrafted from durable CNC aluminum, this bridge plate easily attaches to ARRI standard dovetail plates for added support. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eIt includes two 12\" 15mm rods and offers versatile mounting options with 1\/4\"-20 and 3\/8\"-16 screws. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eSecure your setup with locking levers and enjoy precise positioning. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this camera baseplate. Products found while comparing camera rig and 15mm rods may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE Bridge Plate 15 mm Studio ARRI Standard is intended for camera mounting, lens support, matte box, and follow-focus builds building a dependable camera mounting, lens support, matte box, and follow-focus builds setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another baseplate when your camera body, rod height, 15 mm or 19 mm standard, dovetail, or tripod interface differs from this model.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE Bridge Plate 15 mm Studio ARRI Standard\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: DP15S\u003c\/li\u003e\n\u003cli\u003eEnhance your camera rig with the SHAPE Bridge Plate 15mm Studio ARRI Standard.\u003c\/li\u003e\n\u003cli\u003eCrafted from durable CNC aluminum, this bridge plate easily attaches to ARRI standard dovetail plates for added support.\u003c\/li\u003e\n\u003cli\u003eIt includes two 12\" 15mm rods and offers versatile mounting options with 1\/4\"-20 and 3\/8\"-16 screws.\u003c\/li\u003e\n\u003cli\u003eSecure your setup with locking levers and enjoy precise positioning.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model DP15S used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model DP15S is a camera baseplate and rod-support component intended for camera mounting, lens support, matte box, and follow-focus builds. Enhance your camera rig with the SHAPE Bridge Plate 15mm Studio ARRI Standard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model DP15S?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model DP15S, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model DP15S?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model DP15S, Crafted from durable CNC aluminum, this bridge plate easily attaches to ARRI standard dovetail plates for added support. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model DP15S?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model DP15S. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU DP15S to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model DP15S compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another baseplate when your camera body, rod height, 15 mm or 19 mm standard, dovetail, or tripod interface differs from this model. SHAPE model DP15S is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE Bridge Plate 15 mm Studio ARRI Standard in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE Bridge Plate 15 mm Studio ARRI Standard with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE Bridge Plate 15 mm Studio ARRI Standard from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348439900419,"sku":"DP15S","price":351.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-bridge-plate-15-mm-studio-arri-standard-103561.jpg?v=1785412427"},{"product_id":"shape-bridge-plate-15-mm-studio-arri-standard-with-arri-dovetail-plate-12-inches","title":"SHAPE Bridge Plate 15 mm Studio ARRI Standard with ARRI Dovetail Plate 12 inches","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE Bridge Plate 15 mm Studio ARRI Standard with ARRI Dovetail Plate 12 inches is a camera baseplate and rod-support component for camera mounting, lens support, matte box, and follow-focus builds whose setup calls for SHAPE's ARRI Standard 12″ Dovetail Plate is designed for balancing camera loads and accommodates both 19 mm and 15 mm Arri standard studio bridge plates. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing camera baseplate products and supports camera mounting, lens support, matte box, and follow-focus builds when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eSHAPE's ARRI Standard 12″ Dovetail Plate is designed for balancing camera loads and accommodates both 19 mm and 15 mm Arri standard studio bridge plates. The lightweight, Teflon-coated aluminum plate features a tapered ARRI dovetail configuration for smooth equipment sliding and includes safety measures like a stopper screw and safety latch.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eSHAPE's ARRI Standard 12″ Dovetail Plate is designed for balancing camera loads and accommodates both 19 mm and 15 mm Arri standard studio bridge plates. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eThe lightweight, Teflon-coated aluminum plate features a tapered ARRI dovetail configuration for smooth equipment sliding and includes safety measures like a stopper screw and safety latch. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eIt boasts multiple 1\/4″-20 and 3\/8″-16 threads for flexible mounting options. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eSHAPE also provides a studio bridge plate with locking levers, two 12″ 15 mm rods spaced 100 mm apart, and a pair of 15-mm aluminum rods for rig support. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this camera baseplate. Products found while comparing camera rig and 15mm rods may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE Bridge Plate 15 mm Studio ARRI Standard with ARRI Dovetail Plate 12 inches is intended for camera mounting, lens support, matte box, and follow-focus builds building a dependable camera mounting, lens support, matte box, and follow-focus builds setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another baseplate when your camera body, rod height, 15 mm or 19 mm standard, dovetail, or tripod interface differs from this model.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE Bridge Plate 15 mm Studio ARRI Standard with ARRI Dovetail Plate 12 inches\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: DPK15\u003c\/li\u003e\n\u003cli\u003eSHAPE's ARRI Standard 12″ Dovetail Plate is designed for balancing camera loads and accommodates both 19 mm and 15 mm Arri standard studio bridge plates.\u003c\/li\u003e\n\u003cli\u003eThe lightweight, Teflon-coated aluminum plate features a tapered ARRI dovetail configuration for smooth equipment sliding and includes safety measures like a stopper screw and safety latch.\u003c\/li\u003e\n\u003cli\u003eIt boasts multiple 1\/4″-20 and 3\/8″-16 threads for flexible mounting options.\u003c\/li\u003e\n\u003cli\u003eSHAPE also provides a studio bridge plate with locking levers, two 12″ 15 mm rods spaced 100 mm apart, and a pair of 15-mm aluminum rods for rig support\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model DPK15 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model DPK15 is a camera baseplate and rod-support component intended for camera mounting, lens support, matte box, and follow-focus builds. SHAPE's ARRI Standard 12″ Dovetail Plate is designed for balancing camera loads and accommodates both 19 mm and 15 mm Arri standard studio bridge plates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model DPK15?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model DPK15, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model DPK15?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model DPK15, The lightweight, Teflon-coated aluminum plate features a tapered ARRI dovetail configuration for smooth equipment sliding and includes safety measures like a stopper screw and safety latch. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model DPK15?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model DPK15. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU DPK15 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model DPK15 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another baseplate when your camera body, rod height, 15 mm or 19 mm standard, dovetail, or tripod interface differs from this model. SHAPE model DPK15 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE Bridge Plate 15 mm Studio ARRI Standard with ARRI Dovetail Plate 12 inches in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE Bridge Plate 15 mm Studio ARRI Standard with ARRI Dovetail Plate 12 inches with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE Bridge Plate 15 mm Studio ARRI Standard with ARRI Dovetail Plate 12 inches from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348441211139,"sku":"DPK15","price":478.93,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-bridge-plate-15-mm-studio-arri-standard-with-arri-dovetail-plate-12-inches-253335.jpg?v=1785412440"},{"product_id":"shape-bridge-plate-19-mm-studio-arri-standard","title":"SHAPE Bridge Plate 19 mm Studio ARRI Standard","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE Bridge Plate 19 mm Studio ARRI Standard is a camera baseplate and rod-support component for camera mounting, lens support, matte box, and follow-focus builds whose setup calls for Enhance your rig with the SHAPE Bridge Plate 19 mm Studio ARRI Standard. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing camera baseplate products and supports camera mounting, lens support, matte box, and follow-focus builds when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eEnhance your rig with the SHAPE Bridge Plate 19 mm Studio ARRI Standard. Easily attach it to the ARRI 12\" dovetail plate for additional leverage and versatile mounting. Constructed from CNC aluminum, this bridge plate includes locking levers for secure attachment. It comes with two 12\" 19 mm tapered rods for hassle-free camera and accessory mounting.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eEnhance your rig with the SHAPE Bridge Plate 19 mm Studio ARRI Standard. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eEasily attach it to the ARRI 12\" dovetail plate for additional leverage and versatile mounting. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eConstructed from CNC aluminum, this bridge plate includes locking levers for secure attachment. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eIt comes with two 12\" 19 mm tapered rods for hassle-free camera and accessory mounting. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eThe studio-offset rods are spaced 104 mm apart. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this camera baseplate. Products found while comparing camera rig and 15mm rods may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE Bridge Plate 19 mm Studio ARRI Standard is intended for camera mounting, lens support, matte box, and follow-focus builds building a dependable camera mounting, lens support, matte box, and follow-focus builds setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another baseplate when your camera body, rod height, 15 mm or 19 mm standard, dovetail, or tripod interface differs from this model.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE Bridge Plate 19 mm Studio ARRI Standard\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: DP19S\u003c\/li\u003e\n\u003cli\u003eEnhance your rig with the SHAPE Bridge Plate 19 mm Studio ARRI Standard.\u003c\/li\u003e\n\u003cli\u003eEasily attach it to the ARRI 12\" dovetail plate for additional leverage and versatile mounting.\u003c\/li\u003e\n\u003cli\u003eConstructed from CNC aluminum, this bridge plate includes locking levers for secure attachment.\u003c\/li\u003e\n\u003cli\u003eIt comes with two 12\" 19 mm tapered rods for hassle-free camera and accessory mounting.\u003c\/li\u003e\n\u003cli\u003eThe studio-offset rods are spaced 104 mm apart.\u003c\/li\u003e\n\u003cli\u003eMount various cameras using the 1\/4\"-20 and 3\/8\"-16 screws, and adjust height along the rods with the locking lever.\u003c\/li\u003e\n\u003cli\u003eA magnet-attached flat screwdriver is included for easy screw tightening.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model DP19S used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model DP19S is a camera baseplate and rod-support component intended for camera mounting, lens support, matte box, and follow-focus builds. Enhance your rig with the SHAPE Bridge Plate 19 mm Studio ARRI Standard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model DP19S?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model DP19S, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model DP19S?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model DP19S, Easily attach it to the ARRI 12\" dovetail plate for additional leverage and versatile mounting. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model DP19S?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model DP19S. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU DP19S to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model DP19S compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another baseplate when your camera body, rod height, 15 mm or 19 mm standard, dovetail, or tripod interface differs from this model. SHAPE model DP19S is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE Bridge Plate 19 mm Studio ARRI Standard in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE Bridge Plate 19 mm Studio ARRI Standard with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE Bridge Plate 19 mm Studio ARRI Standard from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348442816771,"sku":"DP19S","price":351.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-bridge-plate-19-mm-studio-arri-standard-676988.jpg?v=1785412454"},{"product_id":"shape-bridge-plate-19-mm-studio-arri-standard-with-arri-dovetail-plate-12-inches","title":"SHAPE Bridge Plate 19 mm Studio ARRI Standard with ARRI Dovetail Plate 12 inches","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE Bridge Plate 19 mm Studio ARRI Standard with ARRI Dovetail Plate 12 inches is a camera baseplate and rod-support component for camera mounting, lens support, matte box, and follow-focus builds whose setup calls for SHAPE offers a versatile ARRI Standard 12″ Dovetail Plate for balancing camera loads, facilitating easy mounting of studio bridge plates in both 19 mm and 15 mm Arri standard configurations. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing camera baseplate products and supports camera mounting, lens support, matte box, and follow-focus builds when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eSHAPE offers a versatile ARRI Standard 12″ Dovetail Plate for balancing camera loads, facilitating easy mounting of studio bridge plates in both 19 mm and 15 mm Arri standard configurations. Crafted from lightweight, Teflon-coated aluminum with a tapered ARRI dovetail design, it allows smooth back-and-forth equipment movement while ensuring safety with a stopper screw and safety latch.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eSHAPE offers a versatile ARRI Standard 12″ Dovetail Plate for balancing camera loads, facilitating easy mounting of studio bridge plates in both 19 mm and 15 mm Arri standard configurations. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eCrafted from lightweight, Teflon-coated aluminum with a tapered ARRI dovetail design, it allows smooth back-and-forth equipment movement while ensuring safety with a stopper screw and safety latch. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eThe plate boasts multiple 1\/4″-20 and 3\/8″-16 threads for versatile mounting options. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eAlongside this, SHAPE provides a studio bridge plate with locking levers, two 12″ 19 mm rods spaced 104 mm apart, and a pair of 19 mm Aluminum Rods (12″) suitable for extending your camera rig and accommodating various accessories compatible with 19 mm rods, thanks to their non-threaded, hollow, and reliable aluminum construction with a clear finish. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this camera baseplate. Products found while comparing camera rig and 15mm rods may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE Bridge Plate 19 mm Studio ARRI Standard with ARRI Dovetail Plate 12 inches is intended for camera mounting, lens support, matte box, and follow-focus builds building a dependable camera mounting, lens support, matte box, and follow-focus builds setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another baseplate when your camera body, rod height, 15 mm or 19 mm standard, dovetail, or tripod interface differs from this model.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE Bridge Plate 19 mm Studio ARRI Standard with ARRI Dovetail Plate 12 inches\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: DPK19\u003c\/li\u003e\n\u003cli\u003eSHAPE offers a versatile ARRI Standard 12″ Dovetail Plate for balancing camera loads, facilitating easy mounting of studio bridge plates in both 19 mm and 15 mm Arri standard configurations.\u003c\/li\u003e\n\u003cli\u003eCrafted from lightweight, Teflon-coated aluminum with a tapered ARRI dovetail design, it allows smooth back-and-forth equipment movement while ensuring safety with a stopper screw and safety latch.\u003c\/li\u003e\n\u003cli\u003eThe plate boasts multiple 1\/4″-20 and 3\/8″-16 threads for versatile mounting options.\u003c\/li\u003e\n\u003cli\u003eAlongside this, SHAPE provides a studio bridge plate with locking levers, two 12″ 19 mm rods spaced 104 mm apart, and a pair of 19 mm Aluminum Rods (12″) suitable for extending your camera rig and accommodating various accessories compatible with 19 mm rods, thanks to their non-threaded, hollow, and reliable aluminum construction with a clear finish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model DPK19 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model DPK19 is a camera baseplate and rod-support component intended for camera mounting, lens support, matte box, and follow-focus builds. SHAPE offers a versatile ARRI Standard 12″ Dovetail Plate for balancing camera loads, facilitating easy mounting of studio bridge plates in both 19 mm and 15 mm Arri standard configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model DPK19?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model DPK19, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model DPK19?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model DPK19, Crafted from lightweight, Teflon-coated aluminum with a tapered ARRI dovetail design, it allows smooth back-and-forth equipment movement while ensuring safety with a stopper screw and safety latch. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model DPK19?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model DPK19. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU DPK19 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model DPK19 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another baseplate when your camera body, rod height, 15 mm or 19 mm standard, dovetail, or tripod interface differs from this model. SHAPE model DPK19 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE Bridge Plate 19 mm Studio ARRI Standard with ARRI Dovetail Plate 12 inches in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE Bridge Plate 19 mm Studio ARRI Standard with ARRI Dovetail Plate 12 inches with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE Bridge Plate 19 mm Studio ARRI Standard with ARRI Dovetail Plate 12 inches from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348443111683,"sku":"DPK19","price":527.11,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-bridge-plate-19-mm-studio-arri-standard-with-arri-dovetail-plate-12-inches-164038.jpg?v=1785412467"},{"product_id":"shape-bridge-plate-universal-arri-standard","title":"SHAPE Bridge Plate Universal ARRI Standard","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE Bridge Plate Universal ARRI Standard is a camera baseplate and rod-support component for camera mounting, lens support, matte box, and follow-focus builds whose setup calls for Easily enhance your setup with the SHAPE Universal Bridge Plate ARRI Standard. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing camera baseplate products and supports camera mounting, lens support, matte box, and follow-focus builds when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eEasily enhance your setup with the SHAPE Universal Bridge Plate ARRI Standard. This plate seamlessly attaches to the lightweight ARRI standard 12\" dovetail plate, providing extra leverage and versatile mounting options. Crafted from durable CNC aluminum, it features a locking lever for secure attachment to the dovetail.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eEasily enhance your setup with the SHAPE Universal Bridge Plate ARRI Standard. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eThis plate seamlessly attaches to the lightweight ARRI standard 12\" dovetail plate, providing extra leverage and versatile mounting options. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eCrafted from durable CNC aluminum, it features a locking lever for secure attachment to the dovetail. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eWith one 1\/4\"-20 and one 3\/8\"-16 screw, you can mount various cameras and rod baseplates. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eThe rubberized surface prevents scratching and slipping, offering a balanced solution for your camera rig. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this camera baseplate. Products found while comparing camera rig and 15mm rods may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE Bridge Plate Universal ARRI Standard is intended for camera mounting, lens support, matte box, and follow-focus builds building a dependable camera mounting, lens support, matte box, and follow-focus builds setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another baseplate when your camera body, rod height, 15 mm or 19 mm standard, dovetail, or tripod interface differs from this model.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE Bridge Plate Universal ARRI Standard\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: DPLWS\u003c\/li\u003e\n\u003cli\u003eEasily enhance your setup with the SHAPE Universal Bridge Plate ARRI Standard.\u003c\/li\u003e\n\u003cli\u003eThis plate seamlessly attaches to the lightweight ARRI standard 12\" dovetail plate, providing extra leverage and versatile mounting options.\u003c\/li\u003e\n\u003cli\u003eCrafted from durable CNC aluminum, it features a locking lever for secure attachment to the dovetail.\u003c\/li\u003e\n\u003cli\u003eWith one 1\/4\"-20 and one 3\/8\"-16 screw, you can mount various cameras and rod baseplates.\u003c\/li\u003e\n\u003cli\u003eThe rubberized surface prevents scratching and slipping, offering a balanced solution for your camera rig.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model DPLWS used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model DPLWS is a camera baseplate and rod-support component intended for camera mounting, lens support, matte box, and follow-focus builds. Easily enhance your setup with the SHAPE Universal Bridge Plate ARRI Standard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model DPLWS?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model DPLWS, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model DPLWS?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model DPLWS, This plate seamlessly attaches to the lightweight ARRI standard 12\" dovetail plate, providing extra leverage and versatile mounting options. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model DPLWS?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model DPLWS. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU DPLWS to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model DPLWS compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another baseplate when your camera body, rod height, 15 mm or 19 mm standard, dovetail, or tripod interface differs from this model. SHAPE model DPLWS is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE Bridge Plate Universal ARRI Standard in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE Bridge Plate Universal ARRI Standard with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE Bridge Plate Universal ARRI Standard from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348443341059,"sku":"DPLWS","price":139.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-bridge-plate-universal-arri-standard-871127.jpg?v=1785412478"},{"product_id":"shape-bridge-plate-universal-arri-standard-with-arri-dovetail-plate-12-inches","title":"SHAPE Bridge Plate Universal ARRI Standard with ARRI Dovetail Plate 12 inches","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE Bridge Plate Universal ARRI Standard with ARRI Dovetail Plate 12 inches is a camera baseplate and rod-support component for camera mounting, lens support, matte box, and follow-focus builds whose setup calls for The SHAPE bridge universal plate can easily slide onto the lightweight ARRI standard 12″ dovetail plate (DP12A) for additional leverage and mounting options. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing camera baseplate products and supports camera mounting, lens support, matte box, and follow-focus builds when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe SHAPE bridge universal plate can easily slide onto the lightweight ARRI standard 12″ dovetail plate (DP12A) for additional leverage and mounting options. It is made of CNC aluminum and designed with a locking lever to secure the bridge plate to the dovetail. One 1\/4″-20 and one 3\/8″-16 screw allow mounting a variety of cameras and rod baseplates.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eThe SHAPE bridge universal plate can easily slide onto the lightweight ARRI standard 12″ dovetail plate (DP12A) for additional leverage and mounting options. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eIt is made of CNC aluminum and designed with a locking lever to secure the bridge plate to the dovetail. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eOne 1\/4″-20 and one 3\/8″-16 screw allow mounting a variety of cameras and rod baseplates. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eThe Standard ARRI-Style Sliding Bridge Plate uses a separately available dovetail plate to balance your camera as the rig's weight changes. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eThe rubberized surface prevents the camera or rod baseplate from scratching and slipping. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare exact compatibility, mounting standard, dimensions, included parts, and the surrounding camera-rig workflow before choosing this camera baseplate. Products found while comparing camera rig and 15mm rods may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE Bridge Plate Universal ARRI Standard with ARRI Dovetail Plate 12 inches is intended for camera mounting, lens support, matte box, and follow-focus builds building a dependable camera mounting, lens support, matte box, and follow-focus builds setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose another baseplate when your camera body, rod height, 15 mm or 19 mm standard, dovetail, or tripod interface differs from this model.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE Bridge Plate Universal ARRI Standard with ARRI Dovetail Plate 12 inches\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: DPKLW\u003c\/li\u003e\n\u003cli\u003eThe SHAPE bridge universal plate can easily slide onto the lightweight ARRI standard 12″ dovetail plate (DP12A) for additional leverage and mounting options.\u003c\/li\u003e\n\u003cli\u003eIt is made of CNC aluminum and designed with a locking lever to secure the bridge plate to the dovetail.\u003c\/li\u003e\n\u003cli\u003eOne 1\/4″-20 and one 3\/8″-16 screw allow mounting a variety of cameras and rod baseplates.\u003c\/li\u003e\n\u003cli\u003eThe Standard ARRI-Style Sliding Bridge Plate uses a separately available dovetail plate to balance your camera as the rig's weight changes.\u003c\/li\u003e\n\u003cli\u003eThe rubberized surface prevents the camera or rod baseplate from scratching and slipping.\u003c\/li\u003e\n\u003cli\u003eAdding this adapter plate allows you to continue working with your proprietary 15mm LWS for any given camera.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model DPKLW used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model DPKLW is a camera baseplate and rod-support component intended for camera mounting, lens support, matte box, and follow-focus builds. The SHAPE bridge universal plate can easily slide onto the lightweight ARRI standard 12″ dovetail plate (DP12A) for additional leverage and mounting options.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model DPKLW?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model DPKLW, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model DPKLW?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model DPKLW, It is made of CNC aluminum and designed with a locking lever to secure the bridge plate to the dovetail. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model DPKLW?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model DPKLW. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU DPKLW to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model DPKLW compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose another baseplate when your camera body, rod height, 15 mm or 19 mm standard, dovetail, or tripod interface differs from this model. SHAPE model DPKLW is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE Bridge Plate Universal ARRI Standard with ARRI Dovetail Plate 12 inches in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE Bridge Plate Universal ARRI Standard with ARRI Dovetail Plate 12 inches with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE Bridge Plate Universal ARRI Standard with ARRI Dovetail Plate 12 inches from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348443963651,"sku":"DPKLW","price":280.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-bridge-plate-universal-arri-standard-with-arri-dovetail-plate-12-inches-130124.jpg?v=1785412494"},{"product_id":"shape-c-stand-20-sliding-leg-53","title":"SHAPE C-Stand 20\" Sliding Leg 5'3\"","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE C-Stand 20\" Sliding Leg 5'3\" is a C-Stand and grip support for flags, diffusion, reflectors, grip arms, and compact fixtures whose setup calls for Introducing the SHAPE 20'' C-Stand with Sliding Leg,an essential for photographers and filmmakers. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing C stand products and supports flags, diffusion, reflectors, grip arms, and compact fixtures when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eIntroducing the SHAPE 20'' C-Stand with Sliding Leg,an essential for photographers and filmmakers. With a sleek black anodized aluminum finish and powder coating, it stands tall at 65''\/165 cm, supporting up to 25 lb\/11 kg. Durable aluminum construction, unique locking collars, and knobs ensure stability.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eIntroducing the SHAPE 20'' this product with Sliding Leg,an essential for photographers and filmmakers. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eWith a sleek black anodized aluminum finish and powder coating, it stands tall at 65''\/165 cm, supporting up to 25 lb\/11 kg. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eDurable aluminum construction, unique locking collars, and knobs ensure stability. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eIdeal for bounce cards, gels, flags, and silks. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eAdaptable to uneven surfaces with a sliding leg and removable rubber feet. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare material, maximum height, payload, leg design, turtle-base or sliding-leg format, included arm, and transport length before choosing a C-stand. Products found while comparing this product canada and grip head may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE C-Stand 20\" Sliding Leg 5'3\" is intended for flags, diffusion, reflectors, grip arms, and compact fixtures building a dependable flags, diffusion, reflectors, grip arms, and compact fixtures setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose a smaller stand for tight rooms and travel kits, a heavier steel stand when maximum mass matters most, or a combo stand when the load requires a junior receiver.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE C-Stand 20\" Sliding Leg 5'3\"\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: CST20\u003c\/li\u003e\n\u003cli\u003eIntroducing the SHAPE 20'' this product with Sliding Leg,an essential for photographers and filmmakers.\u003c\/li\u003e\n\u003cli\u003eWith a sleek black anodized aluminum finish and powder coating, it stands tall at 65''\/165 cm, supporting up to 25 lb\/11 kg.\u003c\/li\u003e\n\u003cli\u003eDurable aluminum construction, unique locking collars, and knobs ensure stability.\u003c\/li\u003e\n\u003cli\u003eIdeal for bounce cards, gels, flags, and silks.\u003c\/li\u003e\n\u003cli\u003eAdaptable to uneven surfaces with a sliding leg and removable rubber feet.\u003c\/li\u003e\n\u003cli\u003eEfficiently save space by nesting with other this products.\u003c\/li\u003e\n\u003cli\u003eElevate your setup with SHAPE's reliability and versatility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model CST20 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model CST20 is a C-stand and grip support intended for flags, diffusion, reflectors, grip arms, and compact fixtures. Introducing the SHAPE 20'' this product with Sliding Leg,an essential for photographers and filmmakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model CST20?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model CST20, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model CST20?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model CST20, With a sleek black anodized aluminum finish and powder coating, it stands tall at 65''\/165 cm, supporting up to 25 lb\/11 kg. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model CST20?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model CST20. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU CST20 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model CST20 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose a smaller stand for tight rooms and travel kits, a heavier steel stand when maximum mass matters most, or a combo stand when the load requires a junior receiver. SHAPE model CST20 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE C-Stand 20\" Sliding Leg 5'3\" in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE C-Stand 20\" Sliding Leg 5'3\" with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE C-Stand 20\" Sliding Leg 5'3\" from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e\u003cp\u003eFor Canadian crews comparing C stand canada, exact compatibility and production fit remain the deciding factors.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348444225795,"sku":"CST20","price":180.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-c-stand-20-sliding-leg-53-692741.jpg?v=1785412510"},{"product_id":"shape-c-stand-20-stainless-steel-arm","title":"SHAPE C-Stand 20\" Stainless Steel Arm","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE C-Stand 20\" Stainless Steel Arm is a C-Stand and grip support for flags, diffusion, reflectors, grip arms, and compact fixtures whose setup calls for Discover the SHAPE stainless steel arm designed for the CST20. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing C stand products and supports flags, diffusion, reflectors, grip arms, and compact fixtures when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eDiscover the SHAPE stainless steel arm designed for the CST20. It can be mounted on C-Stands and light stands. With a diameter of 5\/8'' and a length of 22'' (51 cm), it is typically paired with grip heads at the ends, featuring anti-slip pins to securely fasten accessories (with 1\/4-20 and 3\/8-16 threads).\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eDiscover the SHAPE stainless steel arm designed for the CST20. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eIt can be mounted on C-Stands and light stands. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eWith a diameter of 5\/8'' and a length of 22'' (51 cm), it is typically paired with grip heads at the ends, featuring anti-slip pins to securely fasten accessories (with 1\/4-20 and 3\/8-16 threads). In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eMade from solid stainless steel for optimal durability. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eFilmgear Canada supplies this product for Canadian production crews and studios. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare material, maximum height, payload, leg design, turtle-base or sliding-leg format, included arm, and transport length before choosing a C-stand. Products found while comparing this product canada and grip head may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE C-Stand 20\" Stainless Steel Arm is intended for flags, diffusion, reflectors, grip arms, and compact fixtures building a dependable flags, diffusion, reflectors, grip arms, and compact fixtures setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose a smaller stand for tight rooms and travel kits, a heavier steel stand when maximum mass matters most, or a combo stand when the load requires a junior receiver.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE C-Stand 20\" Stainless Steel Arm\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: C20ARM\u003c\/li\u003e\n\u003cli\u003eDiscover the SHAPE stainless steel arm designed for the CST20.\u003c\/li\u003e\n\u003cli\u003eIt can be mounted on this products and light stands.\u003c\/li\u003e\n\u003cli\u003eWith a diameter of 5\/8'' and a length of 22'' (51 cm), it is typically paired with grip heads at the ends, featuring anti-slip pins to securely fasten accessories (with 1\/4-20 and 3\/8-16 threads).\u003c\/li\u003e\n\u003cli\u003eMade from solid stainless steel for optimal durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model C20ARM used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model C20ARM is a C-stand and grip support intended for flags, diffusion, reflectors, grip arms, and compact fixtures. Discover the SHAPE stainless steel arm designed for the CST20.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model C20ARM?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model C20ARM, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model C20ARM?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model C20ARM, It can be mounted on this products and light stands. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model C20ARM?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model C20ARM. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU C20ARM to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model C20ARM compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose a smaller stand for tight rooms and travel kits, a heavier steel stand when maximum mass matters most, or a combo stand when the load requires a junior receiver. SHAPE model C20ARM is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE C-Stand 20\" Stainless Steel Arm in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE C-Stand 20\" Stainless Steel Arm with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE C-Stand 20\" Stainless Steel Arm from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e\u003cp\u003eFor Canadian crews comparing C stand canada, exact compatibility and production fit remain the deciding factors.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348444684547,"sku":"C20ARM","price":20.05,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-stainless-steel-arm-for-c-stand-20-314199.jpg?v=1785412555"},{"product_id":"shape-c-stand-40-sliding-leg-106","title":"SHAPE C-Stand 40\" Sliding Leg 10'6\"","description":"\u003cp\u003e\u003cstrong\u003eThe SHAPE C-Stand 40\" Sliding Leg 10'6\" is a C-Stand and grip support for flags, diffusion, reflectors, grip arms, and compact fixtures whose setup calls for Introducing the SHAPE 40'' C-Stand with Sliding Leg,a sleek solution for photographers and filmmakers. Available in Canada from Filmgear Canada, it is a model-specific option for buyers comparing C stand products and supports flags, diffusion, reflectors, grip arms, and compact fixtures when its exact fit and interface match the production setup.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eIntroducing the SHAPE 40'' C-Stand with Sliding Leg,a sleek solution for photographers and filmmakers. Crafted with black anodized aluminum, it stands tall at 9.7'\/296 cm, supporting up to 25 lb\/11 kg. Durable construction, unique locking collars, and knobs ensure stability. The 40'' arm with grip head allows versatile accessory mounting,ideal for bounce cards, gels, flags, and silks.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003ch3\u003eExact product role\u003c\/h3\u003e\u003cp\u003eIntroducing the SHAPE 40'' this product with Sliding Leg,a sleek solution for photographers and filmmakers. This is the first point to verify against the intended camera, fixture, stand, lens, or rig.\u003c\/p\u003e\u003ch3\u003eFit and compatibility\u003c\/h3\u003e\u003cp\u003eCrafted with black anodized aluminum, it stands tall at 9.7'\/296 cm, supporting up to 25 lb\/11 kg. Confirming this fit before ordering prevents connector, clearance, or mounting conflicts on set.\u003c\/p\u003e\u003ch3\u003eProduction workflow\u003c\/h3\u003e\u003cp\u003eDurable construction, unique locking collars, and knobs ensure stability. In daily production, this affects setup speed, repeatability, and how the component integrates with the rest of the kit.\u003c\/p\u003e\u003ch3\u003eBuild and interface details\u003c\/h3\u003e\u003cp\u003eThe 40'' arm with grip head allows versatile accessory mounting,ideal for bounce cards, gels, flags, and silks. The named dimensions and interface are more useful for selection than relying on the product category alone.\u003c\/p\u003e\u003ch3\u003eOrdering the correct configuration\u003c\/h3\u003e\u003cp\u003eAdapt to uneven surfaces with the sliding leg and removable rubber feet. Use the manufacturer SKU and complete model name to distinguish this configuration from similar versions.\u003c\/p\u003e\u003ch2\u003eHow It Compares\u003c\/h2\u003e\u003cp\u003eCompare material, maximum height, payload, leg design, turtle-base or sliding-leg format, included arm, and transport length before choosing a C-stand. Products found while comparing this product canada and grip head may solve a related need, but the final choice should be based on exact fit, interface, dimensions, and package configuration.\u003c\/p\u003e\u003ch2\u003eWho Is This For?\u003c\/h2\u003e\u003cp\u003eThe SHAPE C-Stand 40\" Sliding Leg 10'6\" is intended for flags, diffusion, reflectors, grip arms, and compact fixtures building a dependable flags, diffusion, reflectors, grip arms, and compact fixtures setup. It is particularly useful when exact model fit, mounting standard, connector format, or package configuration matters more than a generic accessory.\u003c\/p\u003e\u003ch2\u003eWho Should Choose Something Else?\u003c\/h2\u003e\u003cp\u003eChoose a smaller stand for tight rooms and travel kits, a heavier steel stand when maximum mass matters most, or a combo stand when the load requires a junior receiver.\u003c\/p\u003e\u003ch2\u003eIn the Box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1x SHAPE C-Stand 40\" Sliding Leg 10'6\"\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: SHAPE\u003c\/li\u003e\n\u003cli\u003eManufacturer SKU: CST40\u003c\/li\u003e\n\u003cli\u003eIntroducing the SHAPE 40'' this product with Sliding Leg,a sleek solution for photographers and filmmakers.\u003c\/li\u003e\n\u003cli\u003eCrafted with black anodized aluminum, it stands tall at 9.7'\/296 cm, supporting up to 25 lb\/11 kg.\u003c\/li\u003e\n\u003cli\u003eDurable construction, unique locking collars, and knobs ensure stability.\u003c\/li\u003e\n\u003cli\u003eThe 40'' arm with grip head allows versatile accessory mounting,ideal for bounce cards, gels, flags, and silks.\u003c\/li\u003e\n\u003cli\u003eAdapt to uneven surfaces with the sliding leg and removable rubber feet.\u003c\/li\u003e\n\u003cli\u003eEffortlessly save space by nesting with other this products.\u003c\/li\u003e\n\u003cli\u003eElevate your setup with SHAPE's reliability and versatility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat is SHAPE model CST40 used for?\u003c\/strong\u003e\u003cbr\u003eSHAPE model CST40 is a C-stand and grip support intended for flags, diffusion, reflectors, grip arms, and compact fixtures. Introducing the SHAPE 40'' this product with Sliding Leg,a sleek solution for photographers and filmmakers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich equipment works with SHAPE model CST40?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model CST40, Match the exact camera, fixture, connector, mount, rod standard, or dimensions named for this model. Check the exact model, connector, mount, rod standard, dimensions, and required clearance before adding it to a production rig.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I check before ordering SHAPE model CST40?\u003c\/strong\u003e\u003cbr\u003eFor SHAPE model CST40, Crafted with black anodized aluminum, it stands tall at 9.7'\/296 cm, supporting up to 25 lb\/11 kg. Also compare the current camera, lens, fixture, stand, cable, or support interface so the product fits the intended workflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with SHAPE model CST40?\u003c\/strong\u003e\u003cbr\u003eThe box contains one unit of SHAPE model CST40. If the title names a kit, pair, cable length, arm, handle, case, adapter, or mount, that wording defines the exact package configuration. Use SKU CST40 to distinguish it from similar versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does SHAPE model CST40 compare with other options?\u003c\/strong\u003e\u003cbr\u003eChoose a smaller stand for tight rooms and travel kits, a heavier steel stand when maximum mass matters most, or a combo stand when the load requires a junior receiver. SHAPE model CST40 is the better choice only when its named fit, interface, and configuration match the production requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can I buy the SHAPE C-Stand 40\" Sliding Leg 10'6\" in Canada?\u003c\/strong\u003e\u003cbr\u003eFilmgear Canada offers the SHAPE C-Stand 40\" Sliding Leg 10'6\" with Canada-wide shipping and support from Vancouver. Contact our team when you need help matching this model to a camera, fixture, stand, lens, cable, or rig configuration.\u003c\/p\u003e\u003ch2\u003eWhere to Buy in Canada\u003c\/h2\u003e\u003cp\u003eOrder the SHAPE C-Stand 40\" Sliding Leg 10'6\" from Filmgear Canada for Canada-wide shipping. Vancouver-area customers can contact our store for pickup planning and product-support guidance.\u003c\/p\u003e\u003cp\u003eFor Canadian crews comparing C stand canada, exact compatibility and production fit remain the deciding factors.\u003c\/p\u003e","brand":"SHAPE","offers":[{"title":"Default Title","offer_id":49348444782851,"sku":"CST40","price":199.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/5972\/7796\/files\/shape-c-stand-40-sliding-leg-106-391831.jpg?v=1785412572"}],"url":"https:\/\/filmgearcanada.com\/collections\/shape-flash-sale.oembed?page=5","provider":"Filmgear Canada","version":"1.0","type":"link"}