Product Video

Key Selling Points

Kondor Blue coiled full HDMI cable connector diagram: straight full-size HDMI Type-A plug at each end

The Kondor Blue Full HDMI Cable is a coiled HDMI cable with a full-size HDMI (Type-A) plug at each end, for running video from a camera's full-size HDMI output to the full-size input on an on-camera monitor. The coil rests at 12 inches and pulls out to 24, and the cable is rated for HDMI 2.0 at 18Gbps with signals up to 4096 x 2160 at 60 Hz.

Key Features

  • Full-size HDMI Type-A male plug on both ends, for a camera and a monitor that both use full-size HDMI ports
  • HDMI 2.0 rated at 60 Hz with 18Gbps bandwidth, HDR metadata and 3D video support
  • Handles video from the camera's HDMI output at up to 4096 x 2160 and 60 Hz
  • Coil sits at 12 in and stretches to 24 in (about 30 to 61 cm), so slack stays off the rig when the monitor is close
  • Nylon braid over the cable and reinforced connectors, offered in Kondor Blue, Raven Black and Cardinal Red

In the Box

  • 1 x Kondor Blue Full HDMI Coiled Cable (12 to 24 in)

How It Compares

Feature Kondor Blue full HDMI coil (this cable) Kondor Blue right-angle full HDMI coil
Plug direction Straight Type-A plugs Type-A, one right angle and one left angle
Coil length 12 to 24 in 12 to 24 in
HDMI rating HDMI 2.0, 18Gbps, HDR metadata HDMI 2.0, 18Gbps, HDR metadata
Top resolution 4096 x 2160 at 60 Hz 4096 x 2160 at 60 Hz
Colour options Kondor Blue, Raven Black, Cardinal Red Kondor Blue, Raven Black, Cardinal Red
  • Pick this straight-plug coil when the HDMI ports on your camera and monitor face open space, or when one cable has to move between several bodies without checking which way an angled plug turns.
  • Pick the Kondor Blue Right-Angle Full-HDMI Coiled Cable when a straight plug would stick out past a cage plate or into a side handle. The signal rating and coil length are the same, so the choice comes down to how the plugs fold.

Pair It With

  • Atomos Shinobi GO 5.2" Touchscreen HDR Monitor: Atomos builds the Shinobi GO with a full-size HDMI input, so this cable plugs into it directly from any camera with a full-size HDMI output. Check the frame rate your monitor accepts at its input before planning a 4K60 feed.
  • A gimbal build: One buyer replaced a rigid 50 cm HDMI cable with this coil and found it far easier to work with on a gimbal. Balance the gimbal with the cable already connected, and contact Filmgear Canada if you want help choosing the cable length for your rig.

Specifications

Specification Kondor Blue Full HDMI Coiled Cable
Connector 1 HDMI Type-A male
Connector 2 HDMI Type-A male
HDMI version HDMI 2.0, 60 Hz, 18Gbps, HDR metadata
Maximum resolution 4096 x 2160 at 60 Hz
3D support Yes
Cable length 12 in coiled to 24 in extended (about 30 to 61 cm)
Jacket Nylon braided, reinforced connectors
Colours and part numbers Kondor Blue KB-FHDMI-12, Raven Black KB-FHDMI-12-BK, Cardinal Red KB-FHDMI-12-R
Typical use Camera with a full-size HDMI output to an on-camera monitor with a full-size HDMI input

Buy Kondor Blue from Filmgear Canada

Filmgear Canada is an authorized Kondor Blue dealer in Vancouver. We ship Canada-wide, and our team can help you match cages, plates, cables and power to your camera before you buy.

Full-size HDMI Type-A male plug on both ends, for a camera and a monitor that both use full-size HDMI ports

HDMI 2.0 rated at 60 Hz with 18Gbps bandwidth, HDR metadata and 3D video support

Handles video from the camera's HDMI output at up to 4096 x 2160 and 60 Hz

Coil sits at 12 in and stretches to 24 in (about 30 to 61 cm), so slack stays off the rig when the monitor is close

Nylon braid over the cable and reinforced connectors, offered in Kondor Blue, Raven Black and Cardinal Red
1 x Kondor Blue Full HDMI Coiled Cable (12 to 24 in)

We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase. For opened or used items, a minimum 15% restocking fee may apply depending on the item condition.

To start a return, you can contact us at info@filmgearcanada.com. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

You can always contact us for any return-related questions at info@filmgearcanada.com.

Important Notice for Special Order Items

Certain professional and project-based products are supplied on a Special Order basis and are subject to different return conditions. Please review the “Special Order Items” section below before placing your order.

Damages and Issues

Please inspect your order upon reception and contact us immediately if the item is defective, damaged, or if you receive the wrong item, so that we can evaluate the issue and make it right.

If an item is defective within 14 days of delivery, email info@filmgearcanada.com with a short video of the problem and the serial number, or bring it to our showroom. Once we confirm the defect, we’ll replace it (or refund it if a replacement isn’t available) and handle the manufacturer claim ourselves.

For Special Order items, damage or defect claims must be reported immediately upon delivery and will be handled in accordance with the manufacturer’s warranty terms.

Exceptions / Non-returnable Items

Special Order Items (Final Sale)
Certain professional, project-based products are supplied on a Special Order basis and are not regularly stocked. Special Order items are final sale and cannot be returned, exchanged, or refunded once the order has been confirmed with the manufacturer. Special Order items are final sale whether they ship from our stock or are ordered from the manufacturer.

These items are ordered specifically for individual projects and may include, but are not limited to:

  • Professional wireless communication systems
  • Large-scale lighting equipment
  • Studio carts and grip equipment
  • Cine lenses and special production gear

Please ensure compatibility and project requirements before placing your order. If you have any questions regarding lead time or suitability, we strongly recommend contacting us prior to purchase.

In addition, we do not accept returns for open box, demo or clearance items, gift cards, hazardous materials, flammable liquids or gases.

Exchanges

The fastest way to ensure you get what you want is to return the item you have. Once the return is accepted, you may place a new order for the desired item.

Refunds

We will notify you once we’ve received and inspected your return and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please note that it may take some time for your bank or credit card company to process and post the refund.

FAQ

Will this coiled HDMI cable carry a 4K RAW signal?

It passes the HDMI signal your camera sends, and Kondor Blue rates it for HDMI 2.0 at 18Gbps up to 4096 x 2160 at 60 Hz. Whether you get RAW is set by the camera and the recorder: the camera has to output RAW over HDMI and the monitor-recorder has to accept and record it. Check both spec sheets before the shoot.

Does it hold a steady 4K signal at 60p?

Its HDMI 2.0, 18Gbps rating covers 4K at 60 Hz up to 4096 x 2160. One buyer who had repeated trouble running 4K60 over other cables says the Kondor Blue cables have been consistently solid. The monitor also has to accept 4K60 at its input; the Atomos Shinobi II, for example, lists an HDMI 1.4 input.

Will it connect a Fujifilm X-H2 to an Atomos Shinobi II?

One buyer bought it for exactly that pair and reports a dependable HDMI connection. Both plugs are full-size Type-A, which matches the full-size HDMI input Atomos lists for the Shinobi II. If your camera has a micro or mini HDMI port instead, choose Kondor Blue's micro or mini HDMI coiled cable.

Is a coiled HDMI cable easier to manage on a gimbal?

One buyer swapped a stiff 50 cm HDMI cable for this coil and found it much easier to work with, especially on a gimbal. The coil stays at 12 in until the monitor pulls it out, up to 24 in. Balance the gimbal with the cable connected, because the cable still adds a little weight and drag to the payload.

Can I use it to feed a wireless video transmitter?

It works with any transmitter that takes a full-size HDMI input. One buyer uses these Kondor Blue cables both for wireless video transmitters and for on-camera monitors. Confirm the transmitter accepts the resolution and frame rate your camera outputs; the cable itself is rated to 4096 x 2160 at 60 Hz.