KONDOR BLUE
Filmgear Canada is an authorized Kondor Blue dealer. Shop power and SDI cables, camera cages, battery plates, magic arms and the 4x5 matte box in Canadian dollars, with no US duty and free shipping over $199.
Authorized Kondor Blue dealer
Genuine Kondor Blue through official Canadian distribution, with the manufacturer warranty. We coordinate any claim for you.
CAD pricing, no US duty
Buy in Canadian dollars from a Canadian store. No cross-border brokerage or duty at the door.
Free shipping over $199
Standard shipping across Canada is free over $199. Remote areas and oversize items are excluded.
Pickup in Vancouver
Choose store pickup at 945 E Cordova St and collect your order once it is ready.
The Kondor Blue range, by category
Grouped into the same categories as Kondor Blue's own catalogue. Pick a category to jump to it.
Power Cables
Run cameras, monitors and wireless gear from a V-Mount or Gold Mount battery. Regulated cables hold the voltage your device expects. Check the connector on your device before you order, or ask us and we will confirm it.
Cable Management
Mondo Ties screw into any 1/4-20 thread and hold two to three cables. Route power and SDI lines in any direction and keep them clear of the controls.
SDI Cables
Nylon-braided SDI cables with reinforced metal connectors. 12G carries 4K 60p and 8K 30p, 6G carries up to 4K 30p, and 3G carries up to 1080p 60. Right-angle BNC ends keep the connector tight to the rig.
Camera Cages
Our Kondor Blue cage system is for the Sony FX3 and FX30. NATO rails run on all sides, and the removable Arca-Swiss plate on the bottom goes straight onto DJI Ronin gimbals. The top rail comes off so you can fit Sony's XLR handle, which is sold separately.
Mini Lock and Base Plates
Mini Lock is a small quick release for moving monitors and accessories on and off the rig. The plate mounts with ARRI-style pins, a NATO rail, or 1/4-20 and 3/8-16 threads. The 501 Adjustable Baseplate adds height-adjustable 15mm rod support.
Battery Plates
Mount a V-Mount or Gold Mount battery on 15mm rods and feed the rest of the rig from one place. The Pro plates add D-Tap and USB-C PD outputs. The D-Tap hub splits one source into four ports and shows battery voltage.
Magic Arm and Monitor Mounts
Aluminum double ball head arms with a large thumbscrew to lock them in place. Use them to put a monitor, light, microphone or wireless transmitter exactly where you want it.
EDC Multi-Tool
A camera multi-tool built around standard 1/4-inch hex shank bits, so a stripped or lost bit is easy to replace. The flip lid closes magnetically. It stores five 1-inch bits inside and three 2-inch bits at the end, including the 3mm, 4mm and flat head sizes most camera accessories use.
Pro 4x5 Matte Box
A carbon fiber 4x5.65 matte box that runs from one to three filter stages, so you can add or remove trays as the job changes. The included adapter rings cover most lens diameters from 67 to 114mm.
Find the Kondor Blue part by the job
Start with what you need to connect or mount. Each row points to a good first choice.
| What you need to do | Part | Start here | Why |
|---|---|---|---|
| Power a mirrorless camera or laptop from a V-Mount | D-Tap to USB-C | 16" D-Tap to USB-C PD | USB-C PD up to 100W from a D-Tap port. Your device needs to accept USB-C power. |
| Power a Sony FX6 or FX9 from D-Tap | Regulated DC cable | D-Tap to 19.5V DC | Regulated to the 19.5V these cameras take. |
| Power a SmallHD monitor or Teradek from D-Tap | 2-pin power cable | D-Tap to LEMO-Type 2-Pin | Matches the 2-pin 0B input on these devices. Tell us your model and we will confirm it. |
| Send 4K 60p from the camera to a monitor | 12G SDI cable | 22" 12G SDI | 12G carries 4K 60p, and the short length suits a monitor or transmitter on the rig. |
| Run SDI to a monitor across the set | 6G SDI cable | 10 ft 6G SDI | Carries signals up to 4K 30p. A 25 ft version is also available. |
| Build out a Sony FX3 or FX30 | Camera cage | FX3/FX30 Cage | NATO rails on all sides, and the bottom plate works with DJI Ronin gimbals. |
| Add a battery to a 15mm rod rig | Battery plate | Pro V-Mount or Pro Gold Mount | Choose by the battery you already own. Both add D-Tap and USB-C PD outputs. |
| Mount a monitor on the cage | Arm or tilt mount | Cine Magic Arm | Use the arm to position it freely, or the Swivel Tilt Mount for a compact setup. |
Connectors and voltage vary by camera. Tell us your model and we will confirm the part before you order.
A rig that fits together
Cables and mounts only work when the connector and thread match your gear. We check that with you before you order.
We check the fit first
Tell us your camera, monitor and battery. We confirm the SDI standard, voltage and connector before you order.
Clear order status
Each product page shows whether the part is in stock or on backorder. Ask us for timing if you have a shoot date.
One order for the whole rig
We also carry monitors, batteries, wireless video and lighting, so we can quote the full kit together.
Authorized dealer support
Genuine product with the manufacturer warranty. We coordinate the claim with Kondor Blue for you.
Kondor Blue questions
Is Filmgear Canada an authorized Kondor Blue dealer?+
Where can I buy Kondor Blue in Canada?+
Which SDI cable do I need: 12G, 6G or 3G?+
Can I power a mirrorless camera from a V-Mount battery?+
Does the Kondor Blue FX3 cage fit the Sony FX30?+
Are Kondor Blue parts in stock?+
Building a cage, power or cable kit?
Tell us your camera, monitor and battery. We will match the connectors and mounts, and quote the full kit with timing.