MOFAGE Talos Damping Magic Arm
SKU: MOTDMAGARSCB
Pre-order item. For exact lead times, please reach out to our team.
Pairs well with
MOFAGE Talos Damping Magic Arm
The MOFAGE Talos magic arm is an 11-inch articulating support arm with three locking joints, damping friction, and 1/4-inch mounting points for camera accessories. Black, silver, and beige variants share the same quick-adjust design for monitors, wireless units, compact lights, and other supported equipment.
Product Overview
Talos uses a central locking control to secure both ball heads and the middle joint while retaining friction for controlled repositioning before the arm is fully tightened. The two ends use 1/4-inch screws with anti-twist locating pins, and a 1/4-inch to 3/8-inch bushing expands the mounting choices. The listed maximum payload is 5kg in the supported configuration, but real capacity depends on arm angle, mounting orientation, and the security of the connected rig points.
Key Features
Damped Three-Joint Adjustment
Friction helps hold the current angle during repositioning, while the centre control locks the two ball heads and middle joint together.
Anti-Twist Mounting Points
Both ends use 1/4-inch screws with locating pins to reduce accessory rotation on compatible ARRI-style mounting holes.
Five-Kilogram Maximum Payload
The published maximum load is 5kg, with practical capacity affected by extension, orientation, leverage, and the strength of the mounting surface.
How It Compares
Choose Talos when controlled repositioning matters more than the simplest low-cost arm. A shorter arm reduces leverage in compact cages, while a dedicated monitor mount may be better when the accessory never needs a wide adjustment range.
Compatible Accessories and Related Gear
Use it with a compatible camera cage, monitor, wireless transmitter, compact light, clamp, or support point. Check thread size, anti-twist hole spacing, payload, leverage, and clearance before mounting.
Who Is This For?
This arm suits camera operators, DIT carts, studio rigs, rental kits, and location crews that regularly reposition monitors or accessories while keeping a single central locking control.
Who Should Choose Something Else?
Choose a shorter arm for very compact rigs, a baby-pin or grip-head solution for heavier lighting equipment, or a fixed monitor mount when maximum rigidity is more important than articulation.
In the Box
- MOFAGE Talos Damping Magic Arm in the selected colour
- 1/4-inch to 3/8-inch adapter bushing
Specifications
- Maximum length: 11in / 28cm
- Maximum listed payload: 11lb / 5kg
- Mounts: 1/4-inch screws with anti-twist pins at both ends
- Points of articulation: three
- Current colours: black, silver, or beige
FAQ
What is the Talos magic arm designed to do?
MOFAGE Talos Damping Magic Arm is designed for articulating a monitor or other supported camera accessory from compatible 1/4-inch mounting points. Its value comes from matching the exact product configuration to the camera, lens, light, filter holder, or support equipment already in use.
How do I check compatibility before ordering the Talos magic arm?
For MOFAGE Talos Damping Magic Arm, compare the mount, physical size, optical format, connector, payload, or accessory standard shown on this page with the corresponding specification on your existing equipment.
What is included with the Talos magic arm?
MOFAGE Talos Damping Magic Arm includes one Talos arm in the selected colour and an adapter bushing. Optional accessories, alternate mounts, cameras, lenses, lights, and support equipment are separate unless they are named in the selected Shopify variant.
When should I choose a different option instead of the Talos magic arm?
Choose a shorter arm, fixed monitor mount, or heavier grip solution instead of MOFAGE Talos Damping Magic Arm when that option better matches your required format, size, mount, focal range, payload, or level of kit completeness.
Where can I buy the Talos magic arm in Canada?
MOFAGE Talos Damping Magic Arm is available from Filmgear Canada with Canada-wide shipping and Vancouver-based assistance. Check the selected variant and the surrounding equipment requirements before placing the order.
Where to Buy in Canada
Buy MOFAGE Talos Damping Magic Arm from Filmgear Canada with Canada-wide shipping and Vancouver-based support. Review the selected mount, size, filter, or kit configuration before ordering so the product matches the rest of your production package.
We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase. For opened or used items, a minimum 15% restocking fee may apply depending on the item condition.
To start a return, you can contact us at info@filmgearcanada.com. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return-related questions at info@filmgearcanada.com.
Important Notice for Special Order Items
Certain professional and project-based products are supplied on a Special Order basis and are subject to different return conditions. Please review the “Special Order Items” section below before placing your order.
Damages and Issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged, or if you receive the wrong item, so that we can evaluate the issue and make it right.
For Special Order items, damage or defect claims must be reported immediately upon delivery and will be handled in accordance with the manufacturer’s warranty terms.
Exceptions / Non-returnable Items
Special Order Items (Final Sale)
Certain professional, project-based products are supplied on a Special Order basis and are not regularly stocked. Special Order items are final sale and cannot be returned, exchanged, or refunded once the order has been confirmed with the manufacturer.
These items are ordered specifically for individual projects and may include, but are not limited to:
- Professional wireless communication systems
- Large-scale lighting equipment
- Studio carts and grip equipment
- Cine lenses and special production gear
Please ensure compatibility and project requirements before placing your order. If you have any questions regarding lead time or suitability, we strongly recommend contacting us prior to purchase.
In addition, we do not accept returns for sale items, gift cards, perishable goods, hazardous materials, flammable liquids, gases, or personal care products.
Exchanges
The fastest way to ensure you get what you want is to return the item you have. Once the return is accepted, you may place a new order for the desired item.
Refunds
We will notify you once we’ve received and inspected your return and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please note that it may take some time for your bank or credit card company to process and post the refund.
FAQ
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Ships from Vancouver, BC across Canada. Free shipping on regular orders over $199 CAD (remote areas and oversize/overweight items excluded). In-stock items typically ship within 1 business day; special-order items ship once the supplier confirms — lead times on request. Local pickup at 945 E Cordova St showroom.
-
Customer Support
Email info@filmgearcanada.com or call (604) 269-4161. Our team gives pre-purchase advice, helps you spec the right model for your shoot, and confirms compatibility before you order. Open Monday–Saturday, 9:30 AM – 5:00 PM PT. In-store consultation at our Vancouver, BC showroom.
-
FAQ’s
Authorized Canadian dealer for Aputure, amaran, DJI, Nanlite, Tilta, and more. All products include full manufacturer warranty and Canadian-side support. For B2B / production-house pricing, net terms, or rental questions, email info@filmgearcanada.com — we work with crews and studios across Canada.
-
Contact Us
Filmgear Canada — 945 E Cordova St #108, Vancouver, BC V6A 1H9. Phone: (604) 269-4161. Email: info@filmgearcanada.com. Showroom open Mon–Sat, 9:30 AM – 5:00 PM — walk-ins welcome, no appointment needed.