Product Video

Watch the arm being positioned and locked with its single tie-down knob.

Key Selling Points

Tilta Pro Articulating Arm holding accessories on a cage, shown in studio and on-set lighting
Tilta Pro Articulating Arm NATO attachment rotating 360 degrees and tilting 90 degrees on its ball joint
Parts of the Tilta Pro Articulating Arm: 1/4"-20 thread with locating points, NATO receiver, thumb screws, stainless steel ball joints and rosette
Tilta Pro Articulating Arm (TA-PAA2-B) specifications: 270 x 72 x 25 mm, 303 g, aluminum alloy and stainless steel
Tilta Pro Articulating Arm with Dual NATO Attachments (TA-PAA-B) specifications: 240 x 72 x 25 mm, 289.5 g

The Tilta Pro Articulating Arm is an articulating arm for mounting an external monitor, wireless video transmitter or EVF to a camera cage, with one tie-down knob that locks every axis at once. It supports up to 5 kg (11 lb) at about 300 g, and comes as the Basic version with 1/4"-20 ends with locating points or with Dual NATO Attachments.

Key Features

  • One tie-down knob locks every axis of the arm at once, so you can reposition a monitor or transmitter quickly between setups.
  • Supports up to 5 kg (11 lb) with a stainless steel interior, while the arm itself weighs about 300 g.
  • Anti-slip spiral texture on both ball joints adds friction when tightened for a stronger, steadier lock.
  • Dual 360 degree adjustable ball joints cover a wide range of mounting angles.
  • Two versions: Basic with a 1/4"-20 thread with locating points and thumb screws on each end, or Dual NATO Attachments with NATO receivers that also have a 1/4"-20 threaded mount.
  • Aluminum alloy and stainless steel construction with a stainless steel rosette and ball joints, in black.

In the Box

  • 1x Tilta Pro Articulating Arm (Basic or Dual NATO Attachments version)

How It Compares

Spec Details
Ends Pro Articulating Arm (Basic): 1/4"-20 thread with locating points
Pro Articulating Arm (Dual NATO): NATO receiver with 1/4"-20 threaded mount
Mini Articulating Arm: 1/4"-20 screws with retractable locating pins
Payload Pro Articulating Arm (Basic): 5 kg (11 lb)
Pro Articulating Arm (Dual NATO): 5 kg (11 lb)
Mini Articulating Arm: 4.5 kg
Net weight Pro Articulating Arm (Basic): 303 g
Pro Articulating Arm (Dual NATO): 289.5 g
Mini Articulating Arm: 151 g
Dimensions Pro Articulating Arm (Basic): 270 x 72 x 25 mm
Pro Articulating Arm (Dual NATO): 240 x 72 x 25 mm
Mini Articulating Arm: 63.29 x 74.93 mm

Choose the Pro arm for heavier monitors, transmitters and longer reach, up to 5 kg. Choose the Mini arm for small monitors, lights and mics close to the cage.

Compatible Accessories and Related Gear

Specifications

Versions Basic, 1/4"-20 with locating points (TA-PAA2-B); Dual NATO Attachments (TA-PAA-B)
Payload Up to 5 kg (11 lb)
Locking Single tie-down knob locks all axes
Ball joints Dual 360 degree adjustable, stainless steel, anti-slip spiral texture
Dimensions Basic: 270 x 72 x 25 mm. Dual NATO: 240 x 72 x 25 mm
Net weight Basic: 303 g. Dual NATO: 289.5 g
Materials Aluminum alloy, stainless steel
Colour Black
One tie-down knob locks every axis of the arm at once, so you can reposition a monitor or transmitter quickly between setups.

Supports up to 5 kg (11 lb) with a stainless steel interior, while the arm itself weighs about 300 g.

Anti-slip spiral texture on both ball joints adds friction when tightened for a stronger, steadier lock.

Dual 360 degree adjustable ball joints cover a wide range of mounting angles.

Two versions: Basic with a 1/4"-20 thread with locating points and thumb screws on each end, or Dual NATO Attachments with NATO receivers that also have a 1/4"-20 threaded mount.

Aluminum alloy and stainless steel construction with a stainless steel rosette and ball joints, in black.
1x Tilta Pro Articulating Arm (Basic or Dual NATO Attachments version)

We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase. For opened or used items, a minimum 15% restocking fee may apply depending on the item condition.

To start a return, you can contact us at info@filmgearcanada.com. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

You can always contact us for any return-related questions at info@filmgearcanada.com.

Important Notice for Special Order Items

Certain professional and project-based products are supplied on a Special Order basis and are subject to different return conditions. Please review the “Special Order Items” section below before placing your order.

Damages and Issues

Please inspect your order upon reception and contact us immediately if the item is defective, damaged, or if you receive the wrong item, so that we can evaluate the issue and make it right.

If an item is defective within 14 days of delivery, email info@filmgearcanada.com with a short video of the problem and the serial number, or bring it to our showroom. Once we confirm the defect, we’ll replace it (or refund it if a replacement isn’t available) and handle the manufacturer claim ourselves.

For Special Order items, damage or defect claims must be reported immediately upon delivery and will be handled in accordance with the manufacturer’s warranty terms.

Exceptions / Non-returnable Items

Special Order Items (Final Sale)
Certain professional, project-based products are supplied on a Special Order basis and are not regularly stocked. Special Order items are final sale and cannot be returned, exchanged, or refunded once the order has been confirmed with the manufacturer. Special Order items are final sale whether they ship from our stock or are ordered from the manufacturer.

These items are ordered specifically for individual projects and may include, but are not limited to:

  • Professional wireless communication systems
  • Large-scale lighting equipment
  • Studio carts and grip equipment
  • Cine lenses and special production gear

Please ensure compatibility and project requirements before placing your order. If you have any questions regarding lead time or suitability, we strongly recommend contacting us prior to purchase.

In addition, we do not accept returns for open box, demo or clearance items, gift cards, hazardous materials, flammable liquids or gases.

Exchanges

The fastest way to ensure you get what you want is to return the item you have. Once the return is accepted, you may place a new order for the desired item.

Refunds

We will notify you once we’ve received and inspected your return and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please note that it may take some time for your bank or credit card company to process and post the refund.

FAQ

Does one knob really lock the whole arm?

Yes. A single tie-down knob locks all axes at once. Loosening it frees every joint together, so hold the monitor with one hand while you reposition it, then tighten the knob.

Should I get the Basic or the Dual NATO Attachments version?

Choose by your cage. The Basic version has a 1/4"-20 thread with locating points on each end and screws straight into a cage or accessory. The Dual NATO Attachments version clamps onto NATO rails and each NATO receiver also has a 1/4"-20 threaded mount for your accessory.

Can I use it with a Tilta Hydra suction cup to hold a camera?

Yes. The arm is rated for up to 5 kg (11 lb), and Tilta shows it paired with the Hydra Electronic Suction Cup for car and window shots. Check the combined weight of your camera and rig before you mount it.

Will it stay put with a heavy monitor?

The arm supports up to 5 kg (11 lb). The stainless steel interior and the anti-slip spiral texture on both ball joints add friction when you tighten the knob to keep a monitor or wireless transmitter at its angle.

What can I mount with the Pro Articulating Arm?

External monitors, wireless video transmitters, electronic viewfinders and other accessories with a 1/4"-20 thread, mounted to a camera cage, rig or support.