Product Video

Key Selling Points

Hollyland Pyro H channel scan results shown as colored bars for each frequency channel
Film set from above with one Pyro transmitter on camera sending to four receivers
Cutaway of the Hollyland Pyro H HDMI input, HDMI loopout and HDMI output with their video formats
Hollyland Pyro H on an NP-F battery, DC power and USB-C power, with USB-C not available in Broadcast mode

The Hollyland Pyro H Receiver is a single HDMI wireless video receiver for adding another monitoring point to a Pyro system, with output up to 4K 30p and a 1,300ft (400m) line-of-sight range. It is the receiver only and needs a Pyro series transmitter to show a picture, and its USB-C port also works as a UVC video source so a computer can take the feed without a capture card.

Key Features

  • Outputs HDMI 1.4b up to 4K at 24, 25 or 30 fps and 1080p up to 60 fps.
  • Works at up to 1,300ft (400m) line of sight with Broadcast mode off and 650ft (200m) with Broadcast mode on.
  • A single Pyro H Transmitter can feed up to 4 of these receivers in Broadcast mode, or 2 with Broadcast mode off.
  • Smart channel scan on the receiver shows the real-time status of each frequency channel, so you can choose a clear one.
  • USB Video Class (UVC) over USB-C sends the picture to a computer without a capture card or software install.
  • Draws under 4W and runs from 6V to 16V DC, an NP-F battery (6.8V to 8.4V) or a 5V/2A USB-C charger with Broadcast mode off.

In the Box

  • 1 x Pyro H Receiver
  • 2 x Cylindrical Antenna (2.4GHz and 5GHz)
  • 1 x USB-C OTG Adapter
  • 1 x Quick Guide and Packing List Card
  • 1 x Warranty Card and Compliance Information

How It Compares

Feature Pyro H Receiver Pyro S Receiver
Video output HDMI 1.4b HDMI 1.4b, 3G-SDI
Power draw Under 4W Under 8W
USB-C power 5V/2A, not in Broadcast mode Not supported
DC adapter in the box None 12V/2A
  • HDMI monitors, or power from a USB-C charger: Choose the Pyro H Receiver. It draws under 4W and accepts 5V/2A USB-C with Broadcast mode off.
  • SDI monitors: Choose the Pyro S Receiver, which adds a 3G-SDI output and comes with a 12V/2A DC adapter.
  • A full set from the start: Consider the Hollyland Pyro H system, which includes a transmitter and a receiver.

Pair It With

  • A Pyro transmitter: Pyro series units pair with each other when both are set to the same group. Mars series transmitters are not compatible with the Pyro H.
  • NP-F batteries: Hollyland recommends the F970, F750 and F550 sizes. The receiver comes without a battery or a DC adapter. The SmallRig USB-C Rechargeable NP-F970 Camera Battery and the SmallRig NP-F550 USB-C Replacement Battery are store options in those sizes.
  • V-Mount power: A V-Mount battery works through a D-Tap to DC cable.
  • Computers: The receiver appears as a UVC video device over USB-C, which is useful for live streaming and video conferencing.
  • USB-C power: A standard 5V/2A charger works with Broadcast mode off. Hollyland says fast-charging chargers are not supported and warns that a power bank can drop current and voltage quickly.

Specifications

Video output HDMI 1.4b
HDMI output formats 720p50/60, 1080i50/60, 1080p24/25/30, 1080p50/60, 4K24/25/30
Line-of-sight range 1,300ft (400m) with Broadcast mode off, 650ft (200m) with Broadcast mode on, Hollyland test data in an open, interference-free environment
Latency 0.06s, Hollyland test data with a 1080p60 signal in a laboratory
Operating frequency 5.150 to 5.250GHz, 5.250 to 5.350GHz, 5.470 to 5.725GHz, 5.725 to 5.850GHz, and 2.412 to 2.484GHz. Bands vary by country and region
Receiver sensitivity -85dBm, -80dBm in Broadcast mode
Bandwidth 20MHz, 40MHz in Broadcast mode
Power input DC 6V to 16V (2.0mm core socket), NP-F battery 6.8V to 8.4V, USB-C 5V/2A (not in Broadcast mode)
Power consumption Under 4W
USB USB-C (USB 2.0 OTG), UVC video output
Antenna connector SMA male
Net weight 192g
Dimensions 109 x 62.3 x 33.4mm (4.3 x 2.45 x 1.3in)
Outputs HDMI 1.4b up to 4K at 24, 25 or 30 fps and 1080p up to 60 fps.

Works at up to 1,300ft (400m) line of sight with Broadcast mode off and 650ft (200m) with Broadcast mode on.

A single Pyro H Transmitter can feed up to 4 of these receivers in Broadcast mode, or 2 with Broadcast mode off.

Smart channel scan on the receiver shows the real-time status of each frequency channel, so you can choose a clear one.

USB Video Class (UVC) over USB-C sends the picture to a computer without a capture card or software install.

Draws under 4W and runs from 6V to 16V DC, an NP-F battery (6.8V to 8.4V) or a 5V/2A USB-C charger with Broadcast mode off.
1 x Pyro H Receiver
2 x Cylindrical Antenna (2.4GHz and 5GHz)
1 x USB-C OTG Adapter
1 x Quick Guide and Packing List Card
1 x Warranty Card and Compliance Information

We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase. For opened or used items, a minimum 15% restocking fee may apply depending on the item condition.

To start a return, you can contact us at info@filmgearcanada.com. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

You can always contact us for any return-related questions at info@filmgearcanada.com.

Important Notice for Special Order Items

Certain professional and project-based products are supplied on a Special Order basis and are subject to different return conditions. Please review the “Special Order Items” section below before placing your order.

Damages and Issues

Please inspect your order upon reception and contact us immediately if the item is defective, damaged, or if you receive the wrong item, so that we can evaluate the issue and make it right.

If an item is defective within 14 days of delivery, email info@filmgearcanada.com with a short video of the problem and the serial number, or bring it to our showroom. Once we confirm the defect, we’ll replace it (or refund it if a replacement isn’t available) and handle the manufacturer claim ourselves.

For Special Order items, damage or defect claims must be reported immediately upon delivery and will be handled in accordance with the manufacturer’s warranty terms.

Exceptions / Non-returnable Items

Special Order Items (Final Sale)
Certain professional, project-based products are supplied on a Special Order basis and are not regularly stocked. Special Order items are final sale and cannot be returned, exchanged, or refunded once the order has been confirmed with the manufacturer. Special Order items are final sale whether they ship from our stock or are ordered from the manufacturer.

These items are ordered specifically for individual projects and may include, but are not limited to:

  • Professional wireless communication systems
  • Large-scale lighting equipment
  • Studio carts and grip equipment
  • Cine lenses and special production gear

Please ensure compatibility and project requirements before placing your order. If you have any questions regarding lead time or suitability, we strongly recommend contacting us prior to purchase.

In addition, we do not accept returns for open box, demo or clearance items, gift cards, hazardous materials, flammable liquids or gases.

Exchanges

The fastest way to ensure you get what you want is to return the item you have. Once the return is accepted, you may place a new order for the desired item.

Refunds

We will notify you once we’ve received and inspected your return and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please note that it may take some time for your bank or credit card company to process and post the refund.

FAQ

Can the Pyro H Receiver take a signal from a Pyro 7 monitor?

Yes. Hollyland's support pages state that Pyro series products can pair with each other. Put the Pyro 7 in transmitter mode and set both units to the same group, and they connect automatically.

Will this receiver work with a Mars 300 Pro transmitter?

No. The Mars 300 Pro belongs to the Mars series, and Hollyland's Pyro H FAQ says the Pyro H is not compatible with that series. Look for a Pyro series transmitter to feed this receiver.

Can a Pyro H Receiver connect to a Pyro S transmitter?

Yes. Pyro S and Pyro H units pair as part of the same Pyro family when they share a group. The Pyro H Receiver outputs HDMI only, so choose a Pyro S Receiver if the monitor at the far end needs 3G-SDI.

Can I run the receiver on mains power with no batteries?

Yes. It takes 6V to 16V at the DC input, and it also accepts a standard 5V/2A USB-C charger with Broadcast mode off. The single receiver does not come with a power adapter or a battery, so bring your own.

Does the receiver only work in 4K, or can it run HD?

It runs HD as well. Hollyland lists HDMI output formats of 720p50/60, 1080i50/60, 1080p24/25/30, 1080p50/60 and 4K at 24, 25 or 30 fps, so the output follows what your camera sends.