Product Video

Key Selling Points

Hollyland Pyro H with 1,300ft (400m) transmission range and 60ms low latency callouts
Cutaway of the Hollyland Pyro H HDMI input, HDMI loopout and HDMI output with their video formats
Film set from above with one Pyro transmitter on camera sending to four receivers
Hollyland Pyro H on an NP-F battery, DC power and USB-C power, with USB-C not available in Broadcast mode

The Hollyland Pyro H Transmitter is a single HDMI wireless video transmitter that sends up to 4K 30p to Pyro series receivers, with a 1,300ft (400m) line-of-sight range and 60ms latency. This listing is the transmitter only, so it suits crews who already own a Pyro receiver or want to add a second camera position, and it needs a Pyro series receiver or the HollyView app on a phone or tablet to show a picture.

Key Features

  • Takes HDMI 1.4b input up to 4K at 24, 25 or 30 fps and 1080p up to 60 fps, with an HDMI 1.4b loopout for an on-camera monitor.
  • Hollyland rates it at 1,300ft (400m) line of sight with Broadcast mode off and 650ft (200m) with Broadcast mode on.
  • Lowest latency is 60ms in Smooth Mode, measured by Hollyland with a 1080p60 signal in a lab.
  • Sends to up to 4 receivers in Broadcast mode, or to 2 receivers plus 2 phones or tablets with Broadcast mode off.
  • Transmits on 2.4GHz and 5GHz and picks a frequency channel automatically at startup.
  • Runs from 6V to 16V DC, an NP-F battery (6.8V to 8.4V) or USB-C at 5V/2A, and draws under 7W. USB-C power is not available in Broadcast mode.

In the Box

  • 1 x Pyro H Transmitter
  • 2 x Cylindrical Antenna (2.4GHz and 5GHz)
  • 1 x USB-C OTG Adapter
  • 1 x Cold Shoe
  • 1 x Quick Guide and Packing List Card
  • 1 x Warranty Card and Compliance Information

How It Compares

Feature Pyro H Transmitter Pyro S Transmitter
Video input HDMI 1.4b HDMI 1.4b, 3G-SDI
Lowest latency (1080p60, no interference) 60ms 50ms
USB-C power 5V/2A, not in Broadcast mode Not supported
Power draw Under 7W Under 11W
  • HDMI cameras that need a local monitor: Choose the Pyro H Transmitter. It has an HDMI loopout, and it can run from a 5V/2A USB-C charger with Broadcast mode off.
  • SDI cameras or lower latency: Choose the Pyro S Transmitter. It adds a 3G-SDI input and has a lowest latency of 50ms against 60ms.
  • Starting without a receiver: Consider the Hollyland Pyro H system, which packs a transmitter and a receiver together.

Pair It With

  • A Pyro receiver: A Pyro series receiver set to the same group pairs automatically. The Pyro H is not compatible with the Mars series.
  • NP-F batteries: Hollyland names the NP-F970, NP-F750 and NP-F550 for this unit, and no battery is included. The SmallRig USB-C Rechargeable NP-F970 Camera Battery and the SmallRig NP-F550 USB-C Replacement Battery use these formats.
  • V-Mount batteries: Connect through a D-Tap to DC cable.
  • USB-C chargers: Use a standard charger rated 5V/2A. Hollyland says fast-charging chargers are not supported, advises against power banks, and notes that USB-C power restarts the device.
  • Phones and tablets: The HollyView app shows the feed on up to 2 mobile devices with Broadcast mode off, and using the app may affect range. Join the Wi-Fi network named HLD plus the device ID.
  • Camera mounting: Hollyland's Quick Guide lists a cold shoe with the single transmitter for mounting it to the camera. Hollyland also makes a Rotatable Cold Shoe Mount and a Screw Fitting for Stabilizer, so contact Filmgear Canada if you need either part.

Specifications

Video input HDMI 1.4b
Video loopout HDMI 1.4b
HDMI input formats 720p50/59.94/60, 1080i50/59.94/60, 1080p23.98/24/25/29.97/30, 1080p50/59.94/60, 4K24/25/30
HDMI loopout formats 720p50/60, 1080i50/60, 1080p24/25/30, 1080p50/60, 4K24/25/30
Line-of-sight range 1,300ft (400m) with Broadcast mode off, 650ft (200m) with Broadcast mode on, Hollyland test data in an open, interference-free environment
Latency 0.06s, Hollyland test data with a 1080p60 signal in a laboratory
Operating frequency 5.150 to 5.250GHz, 5.250 to 5.350GHz, 5.470 to 5.725GHz, 5.725 to 5.850GHz, and 2.412 to 2.484GHz. Bands vary by country and region
Transmit power Under 23dBm
Bandwidth 20MHz, 40MHz in Broadcast mode
Power input DC 6V to 16V (2.0mm core socket), NP-F battery 6.8V to 8.4V, USB-C 5V/2A (not in Broadcast mode)
Power consumption Under 7W
USB USB-C (USB 2.0 OTG)
Antenna connector SMA male
Net weight 192g
Dimensions 109 x 62.3 x 33.4mm (4.3 x 2.45 x 1.3in)
Takes HDMI 1.4b input up to 4K at 24, 25 or 30 fps and 1080p up to 60 fps, with an HDMI 1.4b loopout for an on-camera monitor.

Hollyland rates it at 1,300ft (400m) line of sight with Broadcast mode off and 650ft (200m) with Broadcast mode on.

Lowest latency is 60ms in Smooth Mode, measured by Hollyland with a 1080p60 signal in a lab.

Sends to up to 4 receivers in Broadcast mode, or to 2 receivers plus 2 phones or tablets with Broadcast mode off.

Transmits on 2.4GHz and 5GHz and picks a frequency channel automatically at startup.

Runs from 6V to 16V DC, an NP-F battery (6.8V to 8.4V) or USB-C at 5V/2A, and draws under 7W. USB-C power is not available in Broadcast mode.
1 x Pyro H Transmitter
2 x Cylindrical Antenna (2.4GHz and 5GHz)
1 x USB-C OTG Adapter
1 x Cold Shoe
1 x Quick Guide and Packing List Card
1 x Warranty Card and Compliance Information

We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase. For opened or used items, a minimum 15% restocking fee may apply depending on the item condition.

To start a return, you can contact us at info@filmgearcanada.com. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

You can always contact us for any return-related questions at info@filmgearcanada.com.

Important Notice for Special Order Items

Certain professional and project-based products are supplied on a Special Order basis and are subject to different return conditions. Please review the “Special Order Items” section below before placing your order.

Damages and Issues

Please inspect your order upon reception and contact us immediately if the item is defective, damaged, or if you receive the wrong item, so that we can evaluate the issue and make it right.

If an item is defective within 14 days of delivery, email info@filmgearcanada.com with a short video of the problem and the serial number, or bring it to our showroom. Once we confirm the defect, we’ll replace it (or refund it if a replacement isn’t available) and handle the manufacturer claim ourselves.

For Special Order items, damage or defect claims must be reported immediately upon delivery and will be handled in accordance with the manufacturer’s warranty terms.

Exceptions / Non-returnable Items

Special Order Items (Final Sale)
Certain professional, project-based products are supplied on a Special Order basis and are not regularly stocked. Special Order items are final sale and cannot be returned, exchanged, or refunded once the order has been confirmed with the manufacturer. Special Order items are final sale whether they ship from our stock or are ordered from the manufacturer.

These items are ordered specifically for individual projects and may include, but are not limited to:

  • Professional wireless communication systems
  • Large-scale lighting equipment
  • Studio carts and grip equipment
  • Cine lenses and special production gear

Please ensure compatibility and project requirements before placing your order. If you have any questions regarding lead time or suitability, we strongly recommend contacting us prior to purchase.

In addition, we do not accept returns for open box, demo or clearance items, gift cards, hazardous materials, flammable liquids or gases.

Exchanges

The fastest way to ensure you get what you want is to return the item you have. Once the return is accepted, you may place a new order for the desired item.

Refunds

We will notify you once we’ve received and inspected your return and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please note that it may take some time for your bank or credit card company to process and post the refund.

FAQ

Does the Pyro H Transmitter work with a Hollyland Mars monitor or receiver?

No. Hollyland's Pyro H FAQ lists the Pyro H as not compatible with the Mars series. It pairs inside the Pyro family instead, so a Pyro H Receiver, a Pyro S Receiver or another Pyro series unit set to the same group can take its signal.

Can an iPhone connect straight to the Pyro H Transmitter?

Yes, with the HollyView app, which iOS users download from the App Store. Join the transmitter's Wi-Fi network, named HLD plus its device ID, and open the app. Up to 2 phones or tablets can connect at once, but only with Broadcast mode off, and Hollyland notes that using the app may affect range.

Can I run 3 receivers and a phone from one transmitter?

No. Hollyland lists two setups. With Broadcast mode on, one transmitter reaches up to 4 receivers and no phones or tablets. With Broadcast mode off, it reaches at most 2 receivers plus 2 mobile devices. Three receivers means Broadcast mode, and that rules out app monitoring.

How does the transmitter attach to the camera?

Hollyland's Quick Guide lists a cold shoe with the single transmitter and mounts the unit to the camera with it before connecting the HDMI cable. The packing list card in the box confirms what your unit includes. Hollyland also makes a Rotatable Cold Shoe Mount and a Screw Fitting for Stabilizer as separate parts, so contact Filmgear Canada to ask about those two.

Can USB-C power the Pyro H Transmitter?

Yes, with Broadcast mode off and a standard charger rated 5V/2A. Hollyland says fast-charging USB-C chargers are not supported, advises against power banks, and notes that USB-C power restarts the device. In Broadcast mode, use the 6V to 16V DC input or an NP-F battery.