Product Video

The Kondor Blue D-Tap to Canon LPE6 NH Dummy Battery Cable is a Canon dummy battery on a coiled cable: the LP-E6NH-size dummy sits in the battery slot of a camera or monitor, and the Smart D-Tap plug draws power from the D-Tap port on a battery or battery plate. It accepts 8 to 17V and gives the device a regulated output rated at 2A, on a coil that stretches from 16 to 36 inches.

Key Features

  • LP-E6NH-size dummy battery on the device end and a Smart D-Tap plug on the power end
  • Accepts 8V to 17V from the D-Tap source and regulates it to an 8V output rated at 2A
  • Smart D-Tap connector with reverse polarity protection and a status light: blue or green while working, red when a fault cuts the power
  • Coiled nylon braided cable, 16 in (about 41 cm) relaxed and 36 in (about 91 cm) stretched, with reinforced connectors
  • Kondor Blue lists Canon, SmallHD, Blackmagic, Lilliput and Edelkrone gear, motorized sliders and audio devices as compatible, and lists the Canon C50 and Blackmagic Micro Cinema Camera as not compatible

In the Box

  • 1 x Kondor Blue D-Tap to Canon LP-E6NH Dummy Battery Cable (16 to 36 in coiled)

How It Compares

Feature Kondor Blue D-Tap to LP-E6NH dummy (this cable) Kondor Blue 16 in D-Tap to USB-C PD
Camera connection Dummy battery in the LP-E6NH slot USB-C port
Output 8V regulated, 2A USB-C PD, 5V to 20V, up to 100W
Cable Coiled, 16 to 36 in 16 in, not coiled
Canon EOS R5 C in 8K RAW May need a higher-current source Rated for 8K 60 RAW
  • Choose this dummy battery cable when your camera or monitor runs on LP-E6NH batteries and you want power to go in through the battery slot, with a coil that follows the rig as it moves.
  • Choose the Kondor Blue 16" D-Tap to USB-C Power Delivery Cable for a Canon EOS R5 C shooting 8K RAW. Kondor Blue rates that cable for 8K 60 RAW on the R5 C, and notes that the R5 C and R5 Mark II may need a higher-current source than this dummy battery in demanding modes.

Pair It With

  • A D-Tap power source: a battery or battery plate with a D-Tap output between 8 and 17V. Keep this cable for cameras, monitors and small accessories. Kondor Blue warns against using it with lights or other high-current devices. Contact Filmgear Canada if you want help choosing the battery side of the rig.

Specifications

Specification Kondor Blue D-Tap to Canon LPE6 NH Dummy Battery Cable
Power end D-Tap plug with Smart D-Tap status light and reverse polarity protection
Device end Canon LP-E6NH-size dummy battery
Input voltage 8V to 17V
Output 8V regulated, 2A
Cable length 16 in coiled, 36 in extended (about 41 to 91 cm)
Weight 1.8 oz (about 51 g)
Jacket Nylon braided, reinforced connectors
Not compatible with Canon C50, Blackmagic Design Micro Cinema Camera
Not for Lights or other high-current devices
Colours and part numbers Raven Black KB-DTAP-CLPE6-BK, Kondor Blue KB-DTAP-CLPE6

Buy Kondor Blue from Filmgear Canada

Filmgear Canada is an authorized Kondor Blue dealer in Vancouver. We ship Canada-wide, and our team can help you match cages, plates, cables and power to your camera before you buy.

LP-E6NH-size dummy battery on the device end and a Smart D-Tap plug on the power end

Accepts 8V to 17V from the D-Tap source and regulates it to an 8V output rated at 2A

Smart D-Tap connector with reverse polarity protection and a status light: blue or green while working, red when a fault cuts the power

Coiled nylon braided cable, 16 in (about 41 cm) relaxed and 36 in (about 91 cm) stretched, with reinforced connectors

Kondor Blue lists Canon, SmallHD, Blackmagic, Lilliput and Edelkrone gear, motorized sliders and audio devices as compatible, and lists the Canon C50 and Blackmagic Micro Cinema Camera as not compatible
1 x Kondor Blue D-Tap to Canon LP-E6NH Dummy Battery Cable (16 to 36 in coiled)

We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase. For opened or used items, a minimum 15% restocking fee may apply depending on the item condition.

To start a return, you can contact us at info@filmgearcanada.com. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

You can always contact us for any return-related questions at info@filmgearcanada.com.

Important Notice for Special Order Items

Certain professional and project-based products are supplied on a Special Order basis and are subject to different return conditions. Please review the “Special Order Items” section below before placing your order.

Damages and Issues

Please inspect your order upon reception and contact us immediately if the item is defective, damaged, or if you receive the wrong item, so that we can evaluate the issue and make it right.

If an item is defective within 14 days of delivery, email info@filmgearcanada.com with a short video of the problem and the serial number, or bring it to our showroom. Once we confirm the defect, we’ll replace it (or refund it if a replacement isn’t available) and handle the manufacturer claim ourselves.

For Special Order items, damage or defect claims must be reported immediately upon delivery and will be handled in accordance with the manufacturer’s warranty terms.

Exceptions / Non-returnable Items

Special Order Items (Final Sale)
Certain professional, project-based products are supplied on a Special Order basis and are not regularly stocked. Special Order items are final sale and cannot be returned, exchanged, or refunded once the order has been confirmed with the manufacturer. Special Order items are final sale whether they ship from our stock or are ordered from the manufacturer.

These items are ordered specifically for individual projects and may include, but are not limited to:

  • Professional wireless communication systems
  • Large-scale lighting equipment
  • Studio carts and grip equipment
  • Cine lenses and special production gear

Please ensure compatibility and project requirements before placing your order. If you have any questions regarding lead time or suitability, we strongly recommend contacting us prior to purchase.

In addition, we do not accept returns for open box, demo or clearance items, gift cards, hazardous materials, flammable liquids or gases.

Exchanges

The fastest way to ensure you get what you want is to return the item you have. Once the return is accepted, you may place a new order for the desired item.

Refunds

We will notify you once we’ve received and inspected your return and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please note that it may take some time for your bank or credit card company to process and post the refund.

FAQ

Can this power a Canon EOS R5 C shooting 8K RAW?

It will power the R5 C, but Kondor Blue notes that the R5 C and R5 Mark II may need a higher-current source in demanding modes such as 8K RAW or high frame rates. This dummy battery's regulated output is rated at 2A. For 8K 60 RAW on the R5 C, Kondor Blue rates its 16 in D-Tap to USB-C Power Delivery Cable instead.

Will it work with the Canon C50?

No. Kondor Blue lists the Canon C50 as not compatible with this dummy battery cable, so plan a different power option for that camera. Contact Filmgear Canada and we will help you pick one.

Will it work with the Blackmagic Micro Cinema Camera?

No. Kondor Blue lists the Blackmagic Design Micro Cinema Camera as not compatible, even though Blackmagic appears among the brands on its compatible list. Check the exact model before you order.

Can I power a SmallHD monitor with it?

Kondor Blue lists SmallHD among the monitor brands this cable powers, so it suits a SmallHD monitor that runs on an LP-E6NH-type battery or battery plate. Keep it to monitors, cameras and small accessories. Kondor Blue warns not to use it with lights or other high-current devices.

What D-Tap source does it need, and how do I know it is working?

Kondor Blue rates the input at 8 to 17V from a D-Tap source. Watch the Smart D-Tap light when you plug in: blue or green means power is flowing, and red means the cable has found a fault and cut power. If the light stays red or dark, contact Filmgear Canada and we will help you check the battery and camera side.