The Kondor Blue D-Tap to Sony A7/FX3/FX30 NP-FZ100 Dummy Battery Cable in Kondor Blue lets an FX3, FX30 or A7-series camera run from the D-Tap port of a V-Mount or Gold Mount battery. Its NP-FZ100-shaped dummy takes any D-Tap input from 8V to 17V and holds the camera at a regulated 8V, rated at 2A, and because this FX3 dummy battery feeds power through the battery slot, the camera's USB-C port stays free for an external SSD.

Key Features

  • Power path: D-Tap plug at the battery, Sony NP-FZ100-type dummy at the camera, blue coiled cable in between
  • 8V to 17V in, regulated 8V out, with a 2A output rating
  • Regulator housed in the dummy battery itself rather than in a box partway along the cable
  • Relaxed length 16 in (about 41 cm), extending to 36 in (about 91 cm); nylon braided jacket, reinforced connectors, 1.9 oz (about 54 g)
  • On Kondor Blue's list: FX3 and FX30, A7-series bodies including the A7 IV, A7S III, A7C II and A7R V, plus the A1, A9 II, A6700 and ZV-E1

In the Box

  • 1 x Kondor Blue D-Tap to Sony A7/FX3/FX30 NP-FZ100 Dummy Battery Cable in Kondor Blue (coils from 16 to 36 in)

How It Compares

Feature This NP-FZ100 dummy cable Kondor Blue 16 in D-Tap to USB-C PD
Power enters through The NP-FZ100 battery slot The camera's USB-C port
Output Regulated 8V, 2A USB-C Power Delivery from 5V to 20V, 100W max
Camera battery Replaced by the dummy Stays inside and is kept charged
Cable Coiled, 16 to 36 in 16 in
USB-C port Free for an SSD or other accessory Used for power
  • Pick the dummy cable for an FX3 or FX30 that records to an external SSD over USB-C, since its power arrives through the battery slot instead.
  • Pick the Kondor Blue 16" D-Tap to USB-C Power Delivery Cable when you want a real battery to stay in the camera. Kondor Blue says it keeps that battery topped up, so the V-Mount or Gold Mount battery on the rig can be changed without the camera shutting down.

Pair It With

  • Prefer black? The same NP-FZ100 cable comes in Raven Black (KB-DT-SA7S-DB-BK) to match a black cage and rig.
  • Battery side: a V-Mount or Gold Mount battery or plate with a D-Tap port inside the 8V to 17V input range. Run only the camera from this cable, because Kondor Blue rules out lights and other high-current loads that can overheat it.

Specifications

Specification Kondor Blue D-Tap to Sony A7/FX3/FX30 NP-FZ100 Dummy Battery Cable
Connectors D-Tap plug to Sony NP-FZ100-type dummy battery
Input 8V to 17V from a D-Tap source
Output 8V, regulated inside the dummy, 2A
Length Coils at 16 in and extends to 36 in (about 41 to 91 cm)
Jacket and connectors Nylon braided, reinforced
Weight 1.9 oz (about 54 g)
Cameras listed by Kondor Blue FX3, FX30, A7 IV, A7S III, A7 III, A7C, A7C II, A7CR, A7R III, A7R IV, A7R V, A1, A9, A9 II, A6600, A6700, ZV-E1, plus the NPA-MQZ1K
Do not use with Lights or other high-current devices
Colour and part number Kondor Blue, KB-DT-SA7S-DB

Buy Kondor Blue from Filmgear Canada

Filmgear Canada is an authorized Kondor Blue dealer in Vancouver. We ship Canada-wide, and our team can help you match cages, plates, cables and power to your camera before you buy.

Power path: D-Tap plug at the battery, Sony NP-FZ100-type dummy at the camera, blue coiled cable in between

8V to 17V in, regulated 8V out, with a 2A output rating

Regulator housed in the dummy battery itself rather than in a box partway along the cable

Relaxed length 16 in (about 41 cm), extending to 36 in (about 91 cm); nylon braided jacket, reinforced connectors, 1.9 oz (about 54 g)

On Kondor Blue's list: FX3 and FX30, A7-series bodies including the A7 IV, A7S III, A7C II and A7R V, plus the A1, A9 II, A6700 and ZV-E1
1 x Kondor Blue D-Tap to Sony A7/FX3/FX30 NP-FZ100 Dummy Battery Cable in Kondor Blue (coils from 16 to 36 in)

We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase. For opened or used items, a minimum 15% restocking fee may apply depending on the item condition.

To start a return, you can contact us at info@filmgearcanada.com. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

You can always contact us for any return-related questions at info@filmgearcanada.com.

Important Notice for Special Order Items

Certain professional and project-based products are supplied on a Special Order basis and are subject to different return conditions. Please review the “Special Order Items” section below before placing your order.

Damages and Issues

Please inspect your order upon reception and contact us immediately if the item is defective, damaged, or if you receive the wrong item, so that we can evaluate the issue and make it right.

If an item is defective within 14 days of delivery, email info@filmgearcanada.com with a short video of the problem and the serial number, or bring it to our showroom. Once we confirm the defect, we’ll replace it (or refund it if a replacement isn’t available) and handle the manufacturer claim ourselves.

For Special Order items, damage or defect claims must be reported immediately upon delivery and will be handled in accordance with the manufacturer’s warranty terms.

Exceptions / Non-returnable Items

Special Order Items (Final Sale)
Certain professional, project-based products are supplied on a Special Order basis and are not regularly stocked. Special Order items are final sale and cannot be returned, exchanged, or refunded once the order has been confirmed with the manufacturer. Special Order items are final sale whether they ship from our stock or are ordered from the manufacturer.

These items are ordered specifically for individual projects and may include, but are not limited to:

  • Professional wireless communication systems
  • Large-scale lighting equipment
  • Studio carts and grip equipment
  • Cine lenses and special production gear

Please ensure compatibility and project requirements before placing your order. If you have any questions regarding lead time or suitability, we strongly recommend contacting us prior to purchase.

In addition, we do not accept returns for open box, demo or clearance items, gift cards, hazardous materials, flammable liquids or gases.

Exchanges

The fastest way to ensure you get what you want is to return the item you have. Once the return is accepted, you may place a new order for the desired item.

Refunds

We will notify you once we’ve received and inspected your return and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please note that it may take some time for your bank or credit card company to process and post the refund.

FAQ

Is the Kondor Blue NP-FZ100 dummy battery safe for my Sony camera?

It regulates the power inside the dummy battery. Kondor Blue lists an 8V to 17V input and a regulated 8V, 2A output, and names cameras such as the A7 IV, A7S III, FX3 and FX30. Use it with a camera on that list, and keep it off lights and high-current devices, which Kondor Blue says can cause overheating or product failure.

Will my Sony A7 IV or FX3 show an "incompatible battery" warning with this cable?

Some owners see a message. One FX3 owner sometimes gets a notice that the battery is not official, presses OK and keeps shooting. One A7 IV owner reported an "incompatible battery" message followed by a shutdown, so try the cable with your own camera before a long shoot and keep a regular battery on hand.

Should I use this dummy battery or a D-Tap to USB-C PD cable on my FX3?

Use the dummy battery when you want the camera's USB-C port free for an SSD or another accessory. Use a D-Tap to USB-C PD cable when you want a regular battery to stay in the camera, because Kondor Blue's USB-C PD cable keeps the internal battery charged so you can swap V-mount or Gold Mount batteries while the camera stays on.

Can I power my camera and monitor from the same V-mount battery?

Plan the wiring first. One creator who uses this cable powers the monitor from a separate battery, and another recommends connecting the power cables first and the HDMI cable last when one battery feeds both. If anything behaves oddly after a rig change, unplug and check the setup before reconnecting.