Product Video

Key Selling Points

Kondor Blue coiled cable connector diagram: full HDMI Type-A plug on one end and micro HDMI Type-D plug on the other

The Kondor Blue Micro-HDMI to HDMI Cable is a coiled micro HDMI to HDMI cable that runs from a camera's micro HDMI (Type-D) output to the full-size HDMI (Type-A) input on an on-camera monitor. It stretches from 12 to 24 inches and is rated for HDMI 2.0 at 18Gbps, up to 4096 x 2160 at 60 Hz, in a braided nylon jacket.

Key Features

  • Micro HDMI Type-D male plug for the camera and a full-size HDMI Type-A male plug for the monitor
  • HDMI 2.0 with 18Gbps bandwidth, HDR metadata and 3D support
  • Rated up to 4096 x 2160 at 60 Hz, so it carries 4K60 when your camera outputs it over HDMI
  • Coils from 12 in to 24 in (about 30 to 61 cm), so the cable shortens as the monitor moves closer
  • Nylon braided jacket with reinforced connectors, in Kondor Blue, Raven Black or Cardinal Red

In the Box

  • 1 x Kondor Blue Micro-HDMI to HDMI Coiled Cable (12 to 24 in)

How It Compares

Feature Kondor Blue coiled (this cable) Kondor Blue 16 in straight
Form Coiled Straight
Length 12 to 24 in 16 in
HDMI HDMI 2.0, 18Gbps, HDR metadata HDMI 2.0, 18Gbps, HDR metadata
Resolution Up to 4096 x 2160 at 60 Hz Up to 4096 x 2160 at 60 Hz
Colours Kondor Blue, Raven Black, Cardinal Red Kondor Blue, Raven Black
  • Choose the coiled cable when the gap between camera and monitor changes, for example when you tilt the monitor or move it between the hot shoe and an arm. The coil takes up the slack between 12 and 24 in.
  • Choose the Kondor Blue Micro HDMI to Full HDMI 16 in Straight Cable when the monitor stays in one place and you want a fixed run with no coil. Both carry the same HDMI 2.0 signal.

Pair It With

  • Atomos Shinobi II 5.2" HDMI Monitor: Atomos builds the Shinobi II with a full-size HDMI input, so the Type-A end of this cable plugs straight in while the micro HDMI end goes into your camera.
  • A cable clamp on your cage: One buyer found the micro HDMI plug a snug fit in the camera port and recommends a clamp so the coil does not strain the connector. Contact Filmgear Canada and we will match a clamp to your camera and cage.

Specifications

Specification Kondor Blue Micro-HDMI to HDMI Coiled Cable
Connector 1 Full HDMI Type-A male
Connector 2 Micro HDMI Type-D male
HDMI version HDMI 2.0, 18Gbps, HDR metadata, high speed
Maximum resolution 4096 x 2160 at 60 Hz
3D support Yes
Cable length 12 in coiled to 24 in extended (about 30 to 61 cm)
Jacket Nylon braided, reinforced connectors
Colours and part numbers Kondor Blue KB-MC-FHDMI-12, Raven Black KB-MC-FHDMI-12-BK, Cardinal Red KB-MC-FHDMI-12-R
Typical use Camera with a micro HDMI output to an on-camera monitor with a full-size HDMI input

Buy Kondor Blue from Filmgear Canada

Filmgear Canada is an authorized Kondor Blue dealer in Vancouver. We ship Canada-wide, and our team can help you match cages, plates, cables and power to your camera before you buy.

Micro HDMI Type-D male plug for the camera and a full-size HDMI Type-A male plug for the monitor

HDMI 2.0 with 18Gbps bandwidth, HDR metadata and 3D support

Rated up to 4096 x 2160 at 60 Hz, so it carries 4K60 when your camera outputs it over HDMI

Coils from 12 in to 24 in (about 30 to 61 cm), so the cable shortens as the monitor moves closer

Nylon braided jacket with reinforced connectors, in Kondor Blue, Raven Black or Cardinal Red
1 x Kondor Blue Micro-HDMI to HDMI Coiled Cable (12 to 24 in)

We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase. For opened or used items, a minimum 15% restocking fee may apply depending on the item condition.

To start a return, you can contact us at info@filmgearcanada.com. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

You can always contact us for any return-related questions at info@filmgearcanada.com.

Important Notice for Special Order Items

Certain professional and project-based products are supplied on a Special Order basis and are subject to different return conditions. Please review the “Special Order Items” section below before placing your order.

Damages and Issues

Please inspect your order upon reception and contact us immediately if the item is defective, damaged, or if you receive the wrong item, so that we can evaluate the issue and make it right.

If an item is defective within 14 days of delivery, email info@filmgearcanada.com with a short video of the problem and the serial number, or bring it to our showroom. Once we confirm the defect, we’ll replace it (or refund it if a replacement isn’t available) and handle the manufacturer claim ourselves.

For Special Order items, damage or defect claims must be reported immediately upon delivery and will be handled in accordance with the manufacturer’s warranty terms.

Exceptions / Non-returnable Items

Special Order Items (Final Sale)
Certain professional, project-based products are supplied on a Special Order basis and are not regularly stocked. Special Order items are final sale and cannot be returned, exchanged, or refunded once the order has been confirmed with the manufacturer. Special Order items are final sale whether they ship from our stock or are ordered from the manufacturer.

These items are ordered specifically for individual projects and may include, but are not limited to:

  • Professional wireless communication systems
  • Large-scale lighting equipment
  • Studio carts and grip equipment
  • Cine lenses and special production gear

Please ensure compatibility and project requirements before placing your order. If you have any questions regarding lead time or suitability, we strongly recommend contacting us prior to purchase.

In addition, we do not accept returns for open box, demo or clearance items, gift cards, hazardous materials, flammable liquids or gases.

Exchanges

The fastest way to ensure you get what you want is to return the item you have. Once the return is accepted, you may place a new order for the desired item.

Refunds

We will notify you once we’ve received and inspected your return and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please note that it may take some time for your bank or credit card company to process and post the refund.

FAQ

Does this micro HDMI cable support 4K at 60p?

Yes, within its rating. Kondor Blue rates this cable for HDMI 2.0 with 18Gbps bandwidth, HDR metadata and 3D, up to 4096 x 2160 at 60 Hz. You will see 4K60 on the monitor when your camera sends 4K60 over HDMI and the monitor accepts that signal at its input.

Which end goes into the camera and which into the monitor?

The small micro HDMI (Type-D) plug goes into the camera, and the full-size HDMI (Type-A) plug goes into the monitor. Before ordering, check that your monitor's input is full-size HDMI, as it is on the Atomos Shinobi II. A monitor with a mini or micro HDMI input needs a different cable.

Will the micro HDMI plug fit my camera's port?

It fits cameras with a micro HDMI (Type-D) port. A camera with a mini HDMI (Type-C) port needs Kondor Blue's mini HDMI version, and a camera with a full-size HDMI port can use the Kondor Blue Right-Angle Full-HDMI coiled cable. If your camera sits in a cage, check that the side plate leaves room around the plug housing.

Should I use a cable clamp with this coiled cable?

On a busy rig it helps. One buyer found the micro HDMI plug a snug fit in the camera port and recommends a clamp so the coil does not strain the connector, or a straight cable if you have no clamp. Kondor Blue's 16 in straight micro HDMI cable carries the same HDMI 2.0, 18Gbps signal if you prefer a fixed run.

How far does the coil stretch between camera and monitor?

It runs from 12 in coiled to 24 in extended, about 30 to 61 cm, which covers a monitor on the hot shoe or on a short arm. One buyer chose it to replace the shorter cable that came with their monitor because their new setup needed more length. For a longer run, contact Filmgear Canada and we will suggest a cable for your camera's port.