(modules 01-17, full public English text)

---

Podcast Studio Equipment and Complete Kits

Build your podcast studio around the voice. Choose the microphone and recording path first, then add monitoring, support, cameras, and lighting. The right setup depends on the room, the number of speakers, how you record, and whether the equipment stays in one place or travels.

A complete podcast setup needs more than a microphone. You need a clear path from each speaker to the recording, a way to monitor the sound, stable microphone support, the correct cables and power, and a backup plan for important sessions. Video podcasters also need cameras, media, lighting, and stands that fit the room.

Use the three kit levels below to choose a starting point:

• Essential: A focused one-person setup built around the RODE PodMic and a direct recording path.
• Professional: A repeatable two-person setup built around an all-in-one podcast console.
• Studio: A permanent or client-facing system sized to your host count, cameras, and lighting positions, reviewed by Filmgear Canada before you order.

Every product recommendation on this page is checked against current Filmgear Canada stock before it appears in a kit.

Ask Filmgear Canada to Review My Setup

---

Choose the setup that matches how you record

Start with the show format. The same shopping list will not suit a solo host at a desk, two hosts recording separate tracks, a mobile interview, and a permanent studio.

Solo audio or video podcast

Choose a direct microphone path, one monitoring position, a stable desktop mount, and a simple recording workflow. Add one camera and one controlled key light when video matters.

Recommended starting tier: Essential

Two-person recorded podcast

Plan two separate microphone paths, two monitoring positions, an all-in-one podcast console, and a camera layout that can hold a clean two-shot. Separate tracks and a backup recording make editing and recovery easier.

Recommended starting tier: Professional

Portable interview or location podcast

Prioritize a compact wireless microphone path, camera compatibility, power, media, cases, and fast setup. A portable setup can use different equipment from a desk-based studio even when the final program looks similar.

Recommended starting tier: Essential or Professional, depending on speaker count and recording path

Permanent studio, corporate team, church, or client-facing room

Plan the host count, input count, headphone monitoring, cable routes, camera positions, lighting zones, support, storage, and operator workflow before choosing products. Filmgear Canada reviews this tier as a system, not a shopping list.

Recommended starting tier: Studio

---

The room changes what your microphone will hear

Listen to the room before choosing the microphone. A quiet room with soft surfaces creates a different recording problem from a bare office with hard walls, glass, ventilation noise, or traffic outside. Microphone placement and distance also affect how much room sound enters the recording.

Check these conditions:

• Audible echo when someone speaks at the recording position
• Heating, ventilation, computer, refrigerator, and street noise
• Desk reflections and keyboard noise
• Distance between speakers
• Space for microphone arms and cameras
• Window position and changing daylight
• Safe cable paths and stand footprints

Move the microphone closer to the speaker when the selected model and framing allow it. Reduce avoidable noise at the source before adding more equipment.

Where acoustics fit

Room acoustic treatment and soundproofing are outside what Filmgear Canada offers. Whole-room isolation is a construction specialty, not a gear order. What this page can help with is the part of the problem that gear and technique do solve: choosing a noise-rejecting dynamic microphone and placing it close to the speaker, which removes a large share of small-room echo before any panel goes on a wall.

---

Choose the microphone before the camera and lights

The microphone has to suit the room, the speaker, the recording device, and the way the show is framed. Product labels alone do not settle the choice. Compare the exact pickup pattern, placement, connector, monitoring path, power requirement, sensitivity, included accessories, and recording workflow before you order.

A note on XLR

XLR is a connector, not a single product category. A desk-based two-host console setup usually pairs with a dynamic microphone built for podcasting, such as the RODE PodMic. A shotgun microphone, such as the RODE NTG4+, is built for camera-mounted or boomed dialogue at a working distance, not for sitting a few centimeters from a host's mouth at a desk. Do not choose between them by connector alone.

Before you order

Do not assume that a shotgun microphone is the right desk microphone for every indoor podcast. Do not assume that two USB microphones will work as two isolated tracks on every computer. Filmgear Canada verifies the complete signal path before the buyer orders.

The gear this section refers to

• Primary podcast microphone, every tier: RODE PodMic Dynamic Podcasting Microphone, Black. Also in White. XLR output with a built-in pop filter and shockmount; pairs with a RODECaster console or any XLR interface. A USB and XLR dual version, RODE PodMic USB, records straight to a computer with no console; stock on the USB version rotates, so consult Filmgear Canada sales for current availability.
• XLR shotgun microphone (camera-mounted or boomed use only): RODE NTG4+ Shotgun Microphone.
• DJI-series wireless microphone: DJI Mic 3 (1 TX + 1 RX). Two-speaker option: DJI Mic 3 2 TX + 1 RX Combo.

---

Map the signal path before you buy

Every speaker needs a defined path from the microphone to the recording. The path must also show how the host monitors the sound, where the main recording lives, and whether a second recording protects the session.

The signal path

Speaker
  ↓
Microphone
  ↓
USB direct to computer
OR
XLR to podcast console
OR
Wireless receiver to camera, console, recorder, or computer
  ↓
Headphone monitoring
  ↓
Primary recording
  ↓
Verified backup recording

Before ordering, confirm:

1. The exact microphone output matches the next device in the chain.
2. The selected console or computer supports the required number of separate microphone tracks.
3. Each host has an approved monitoring path.
4. Required power, adapters, cables, media, and software are included or listed.
5. The camera receives a usable audio feed when the workflow needs one.
6. Remote guests have a verified return-audio or mix-minus workflow.
7. The operator knows which device creates the primary and backup files.

The gear this section refers to

• All-in-one podcast console: RODECaster Duo, Black, for a two-host desk system. Step up to RODECaster Pro II, Black, also available in White, for more inputs and effects control.
• Monitoring headphones: RODE NTH-100 Professional Closed-Back Over-Ear Headphones, Black. Also in White.
• Required cables and adapters: XLR paths can use Zoom XLR Microphone Cables with Color ID Rings. USB paths connect with the cable included in the microphone's box.

---

Choose a complete podcast kit by production level

Planning prices

Kit totals below reflect Filmgear Canada's catalog at the time of this content review and are shown for planning only.

• Essential, core audio and light (PodMic, headphones, boom arm, key light): approximately $602.00 CAD. Add the DJI Mic 3 wireless path for approximately $818.00 CAD.
• Professional, component path (RODECaster Duo, two PodMic, two NTH-100, two PSA1): approximately $1,712.97 CAD. With RODECaster Pro II instead of the Duo: approximately $2,002.98 CAD. One-box path (Rode Podcaster Bundle 2-Person, console included): $1,730.00 CAD.
• Studio, audio foundation (Rode Pro Podcaster Bundle 4-Person, console included): $2,967.00 CAD, before camera, lighting, and video-switching options.

---

Essential Podcast Kit

Choose the Essential kit for one seated host who records to a computer and wants a clear path into video podcasting. This tier keeps the equipment list focused: the primary microphone, monitoring, support, camera, key light, and the connections needed to record.

*Required to record*

1. One podcast microphone. RODE PodMic Dynamic Podcasting Microphone, Black, also in White. Why it is included: a broadcast dynamic microphone rejects room noise the way small condensers cannot, which is exactly what an untreated home room needs, and its built-in pop filter and shockmount mean nothing extra to buy. Recording path: the RODE PodMic USB version plugs straight into a computer with no console; its stock rotates, so consult Filmgear Canada sales for current availability. The XLR version pairs with a RODECaster console or any XLR interface when you are ready to grow.

2. One pair of monitoring headphones. RODE NTH-100 Professional Closed-Back Over-Ear Headphones, Black, also in White. Why it is included: the host needs to hear noise, clipping, distortion, and connection problems before the session ends.

3. One boom arm or desktop stand. RODE PSA1 Studio Boom Arm is the standard clamp-on arm for the PodMic. Prefer a table stand instead? A compact desktop microphone stand works for a fixed seated position; desktop stand stock rotates, so consult Filmgear Canada sales for what is available today. Why it is included: stable support keeps the microphone at a repeatable speaking distance.

4. Required USB cable, adapter, power, and recording software path. Why it is included: the microphone cannot create a usable recording without a verified connection and recording destination.

*Required for a video podcast*

5. One camera and lens path. Filmgear Canada does not recommend a single fixed camera model in this kit. Several current candidates are out of stock or on backorder, and the right camera depends on your budget, framing, and computer or storage workflow. Send Filmgear Canada your room and budget for a current, in-stock recommendation.

6. One key light and modifier. Amaran Ace 25x Bi-Color LED Light Panel. Why it is included: a compact, desk-friendly key light gives the face consistent exposure and shape without requiring a full lighting stand.

7. One light stand or mount. The Ace 25x is a compact desk-friendly panel, so many solo setups run it from a desk position. For a floor position, Filmgear Canada carries studio stands such as the FPS 5-in-1 Mobile Studio Stand and the FPS Full C-Stand with Sliding Leg Kit (40"). Confirm the mount with Filmgear Canada before ordering.

*Recommended*

8. One DJI-series wireless microphone path. DJI Mic 3 (1 TX + 1 RX). Why it is included: it can cover a standing segment, mobile interview, guest, or backup recording path.

9. Media, storage, spare cables, and backup power. Why it is included: a missing cable, full card, or failed power path can stop the recording.

*Room plan*

10. Room note. Acoustic treatment and soundproofing are outside what Filmgear Canada offers. The PodMic's noise-rejecting dynamic design and close placement are this kit's answer to an untreated room.

An honest limitation

This tier is approved for one host only until Filmgear Canada verifies a two-microphone workflow. Do not promise isolated recording from two USB microphones without checking the exact microphones, computer, operating system, software, monitoring, and clocking behavior.

Review the Essential Kit

---

Professional Podcast Kit

Choose the Professional kit for two seated hosts, repeatable client work, corporate interviews, or a show that needs separate microphone tracks and a more controlled video setup. This tier uses an all-in-one podcast console as the recording hub, with an XLR dynamic microphone built for podcasting at each seat.

*Required to record*

1. One all-in-one podcast console. RODECaster Duo, Black, for a two-host desk system. Step up to the RODECaster Pro II, Black, also available in White, for more inputs and expansion room. Why it is included: the console centralizes the microphone inputs, monitoring, primary recording, and operator controls.

2. Two XLR podcast microphones. RODE PodMic Dynamic Podcasting Microphone, Black, and, White. Why they are included: each host needs a separate microphone path so the editor can control the voices independently. A note on terminology: PodMic is a dynamic broadcast microphone built for desk podcasting. It is not a shotgun microphone, and it is the verified XLR path for this tier's desk placement.

3. Two pairs of monitoring headphones. RODE NTH-100, Black, and, White. Why they are included: each host needs to hear the program, remote guest, and recording problems without creating speaker feedback.

4. Two desktop boom arms. RODE PSA1. Why they are included: each microphone needs stable and repeatable positioning.

5. All required XLR cables, adapters, media, storage, and power. Zoom XLR Microphone Cables with Color ID Rings. Why they are included: the console and microphones do not form a working system until every connection and recording destination is defined.

One-box alternative: Rode Podcaster Bundle (2-Person), Black. RODE's official two-person configuration: one RODECaster Duo console, two PodMic microphones, two NTH-100 headphones, two PSA1+ boom arms, and two XLR cables in a single order. Confirm current bundle contents with Filmgear Canada sales at order time.

*Required for video*

6. One primary camera and lens path. Confirmed by consultation rather than a fixed pick in this kit; several current camera candidates are out of stock.

7. Optional second camera path. Confirmed by consultation.

8. One key light plus one fill, edge, or background light. Amaran F22C 2'x2' RGBWW Flexible LED Mat as the key light. Amaran Ace 25x as a compact second or accent light.

9. Approved light stands and safety support. Filmgear Canada carries C-stands and grip support, such as the FPS Full C-Stand with Sliding Leg Kit (40"). The F22C is a flexible mat and mounts through its own frame system rather than like a standard fixture. Confirm the complete support plan with Filmgear Canada.

*Recommended*

10. DJI-series wireless microphone kit. DJI Mic 3 2 TX + 1 RX Combo covers both hosts wireless from one receiver. A single DJI Mic 3 (1 TX + 1 RX) covers one mobile position or a guest. Why it is included: it can cover a mobile segment, a standing guest, a backup track, or a location interview.

11. Backup recording and spare-media plan. Why it is included: a paid or scheduled interview should not depend on one file.

*Room plan*

12. Room note. Acoustic treatment and soundproofing are outside what Filmgear Canada offers. Dynamic microphones at close working distance, plus noise control at the source, are the gear-side answer this kit provides.

An honest limitation

The console's exact input count, isolated-track recording, headphone routing, and camera-feed behavior still need fact verification for the specific selected model before this kit becomes a one-click purchase. The two-microphone path above uses RODE PodMic, a dynamic microphone built for desk podcasting; it should not be swapped for a shotgun microphone without a separate room and placement review.

Review the Professional Kit

---

Studio Podcast Kit

Choose the Studio kit for a permanent room, recurring production, corporate media team, church, school, or client-facing show. Filmgear Canada reviews this tier as a system. The approved seat count depends on the selected console, microphone inputs, headphone outputs, recording format, room, camera plan, and operator workflow.

*Required audio system*

1. One complete four-seat audio system. Rode Pro Podcaster Bundle (4-Person), Black. RODE's official four-person configuration: a RODECaster Pro II console plus four PodMic microphones, four sets of monitoring headphones, four boom arms, and cabling in one order. The console is included, so do not buy a second one. Confirm current bundle contents with Filmgear Canada sales at order time. Why it is included: every host or guest gets an independent, serviceable microphone, monitoring, and support path from a single reviewed order.

2. Seat count beyond four. Additional seats need an input plan reviewed against the console's capacity. Ask Filmgear Canada sales before assuming a fifth position.

5. All cables, adapters, media, storage, network, power, and backup components. Why they are included: a permanent system needs a documented path for every signal and file.

6. DJI-series wireless guest or backup path. DJI Mic 3 2 TX + 1 RX Combo for two simultaneous wireless positions. Add a second DJI Mic 3 (1 TX + 1 RX) kit for additional positions.

*Required video and lighting system*

7. Reviewed camera layout. Confirmed by consultation; Filmgear Canada does not fix a specific camera count or model for this tier on this page. Optional camera-switching hub: RODECaster Video.

8. Reviewed lighting zones. Amaran F22C 2'x2' RGBWW Flexible LED Mat for key and fill positions. Amaran Ace 25x for accent or background positions.

9. Approved stands, mounting, ballast, and cable safety. Filmgear Canada carries C-stands and grip support, such as the FPS Full C-Stand with Sliding Leg Kit (40").

*Room plan*

10. Room note. A permanent room may eventually need a professional acoustic plan. That work sits outside what Filmgear Canada offers; the equipment plan above is scoped to what gear can control.

An honest limitation

The Studio kit requires consultation. Filmgear Canada does not expose a one-click complete-kit purchase until every required product, quantity, connection, support load, recording path, and installation condition has passed review. The 4-Person Bundle already includes the RODECaster Pro II console; a separate console purchase is only for expansion scenarios reviewed with Filmgear Canada sales.

Request a Studio Setup Review

---

Why each component belongs in the kit

---

Add wireless microphones for movement, guests, or backup

A wireless microphone can help when the speaker stands, moves away from the desk, records on location, or needs a separate backup path. It can also cover a guest position when the main console workflow has been verified.

Choose the exact package by:

• Number of speakers
• Receiver type
• Camera, phone, computer, console, or recorder connection
• Monitoring path
• Internal or external recording method
• Charging and power
• Mounting and concealment
• Included adapters and accessories

DJI Mic 3 (1 TX + 1 RX) covers one wireless speaker into a camera, computer, or console. The DJI Mic 3 2 TX + 1 RX Combo with Charging Case covers two speakers from a single receiver, which suits a two-host Professional kit. DJI Mic Mini 2 (2 TX + 1 RX + Charging Case) suits buyers who want the smallest possible transmitters. You can order it even between stock rotations; restock through our Canadian supplier is quick, and Filmgear Canada sales can confirm current timing.

Go deeper

Read the full comparison: DJI Mic 3 vs Mic Mini 2 vs Rode Wireless Pro: Which Wireless Mic in 2026?

Do not repeat model specifications from the comparison article until each claim is rechecked against the article's current published content.

---

Add the video system after the audio path works

Lock the microphone, monitoring, and recording workflow before dividing the remaining budget between cameras and lighting. A video podcast can begin with one stable camera angle and one controlled key light. Add a second camera, fill, edge, or background light when the show format and operator can use them.

*One-camera starting point*

Use one camera when a solo operator needs a dependable master shot. Choose the lens from the room dimensions, camera distance, host count, and desired framing. Filmgear Canada reviews camera selection by request rather than fixing one model on this page, since availability changes often.

*Two-camera expansion*

Add a second camera when the edit needs reactions, close-ups, or a separate host angle. Confirm matching, synchronization, media, power, and operator workload before ordering.

*Key light first*

Use one controlled key light to establish the face exposure. Amaran Ace 25x Bi-Color LED Light Panel suits a desk or solo setup. Amaran F22C 2'x2' RGBWW Flexible LED Mat suits a larger room or a two-host frame.

*Secondary light second*

Add fill when the faces need less contrast. Add an edge or background light when the subjects need separation or the set needs depth. A second Amaran Ace 25x can serve as an accent light; a second F22C mat suits a larger room.

Before you order

Do not buy color effects before the microphone, monitoring, recording path, key light, and safe support are complete.

---

Avoid these podcast equipment mistakes

1. Buying cameras and lights before solving the microphone path. Viewers may tolerate a simple picture, but poor dialogue can make the program hard to follow.
2. Choosing a microphone from the connector alone. USB, XLR, and wireless describe parts of the workflow. The room, placement, pickup pattern, monitoring, and recording device still decide whether the setup fits.
3. Assuming two USB microphones will create two isolated tracks. Confirm the exact computer, operating system, software, devices, monitoring, and clocking workflow before assuming two USB microphones can record separately. A console-based XLR path avoids the problem entirely.
4. Using a shotgun microphone like the RODE NTG4+ indoors without a placement and room review. An XLR connector does not prove that a shotgun microphone suits a desk or reflective room. A dynamic podcast microphone such as the RODE PodMic is the verified desk option instead.
5. Skipping headphones. The operator needs to hear noise, clipping, routing errors, and remote-guest problems during the session.
6. Buying a console before checking every input and output. Count microphones, headphones, cameras, remote guests, computer connections, storage, and backup needs before choosing between the RODECaster Duo and RODECaster Pro II.
7. Forgetting mounts and cables. The wrong thread, clamp, adapter, connector, or cable length can stop the setup.
8. Treating wireless as a complete studio by default. Confirm charging, recording, monitoring, receiver connection, and the exact package contents, whether it is the DJI Mic 3 single kit or the two-transmitter Combo.
9. Adding a second camera before the first workflow is stable. More cameras add media, power, synchronization, support, and operator work.
10. Ignoring the complete lighting load. The fixture, modifier, mount, cable, and stand must work as one supported system.
11. Expecting gear alone to fix a bad room. Acoustic treatment and soundproofing are outside what Filmgear Canada offers. Fix microphone choice, placement, and source noise first; treat the room as a separate project if echo remains.
12. Publishing a kit with stale price or availability text. Product cards must read current Shopify data from the selected variant, not a fixed number written into the page.

---

Buying a complete podcast setup in Canada

Filmgear Canada is an authorized Canadian dealer based in Vancouver, with a showroom you can visit before you buy. In-stock items are available for same-day pickup, and Filmgear Canada ships Canada-wide. Eligible items carry a 14-day return window. Filmgear Canada can review a podcast equipment list before you order.

Send these details with the request:

• Number of hosts and guests
• Audio-only, recorded video, livestream, or mixed format
• Room dimensions and audible noise
• Fixed or portable setup
• Computer and current cameras
• Required remote-guest workflow
• Desired camera count
• Budget range
• Planned upgrade within the next year

Filmgear Canada returns a reviewed list that separates:

• Required to record
• Required for compatibility
• Required for safe support
• Recommended for the chosen format
• Optional upgrade
• Customer-supplied item
• Pending room or installation review

Ask Filmgear Canada to Review My Podcast Kit

---

Continue planning your podcast studio

• Anchor: DJI Mic 3 vs Mic Mini 2 vs Rode Wireless Pro: Which Wireless Mic in 2026?

URL: /blogs/buying-guide/dji-mic-3-vs-mic-2-vs-rode-wireless-pro-canada-guide

• Anchor: Shop Lighting Kits

URL: /collections/lighting-kit

• Anchor: Wedding videography lighting guide

URL: /blogs/buying-guide/wedding-videography-lighting-guide Context line: Also shooting weddings? See how Filmgear Canada approaches lighting for that format.

• Anchor: Church livestream lighting guide

URL: /blogs/buying-guide/church-livestream-lighting-guide Context line: Running a church or livestream room too? This guide covers the lighting fundamentals that carry over.

• Anchor: Contact Filmgear Canada

URL: /pages/contact

• Anchor: Shop USB Microphones

URL:

• Anchor: Shop XLR Podcast Microphones

URL:

• Anchor: Shop Wireless Microphones

URL:

• Anchor: Shop Podcast Consoles

URL:

• Anchor: Shop Monitoring Headphones

URL:

• Anchor: Shop Desktop Boom Arms

URL:

• Anchor: Shop Podcast and Production Kits

URL:

• Anchor: Shop Cameras

URL:

• Anchor: Shop Stands and Support

URL:

Filmgear Canada does not add an acoustic-treatment link until it approves and verifies a category.

---

Podcast Studio Equipment FAQ

What equipment do I need to start a podcast?

Start with one microphone path, monitoring headphones, stable microphone support, the correct cables, and a recording destination. A video podcast also needs a camera, lens, media, power, key light, modifier, and safe support. Add equipment only after the core audio path works.

Should I use a USB or XLR microphone?

Start from the RODE PodMic either way. The PodMic USB version records straight to a computer for a one-person setup, and the XLR version pairs with a console such as the RODECaster Duo or RODECaster Pro II when a show needs separate microphones and tracks. Choose after checking the room, placement, host count, monitoring, power, connector, and future expansion.

Is a dynamic or condenser microphone better for an untreated room?

The label alone does not decide the result. Compare the exact pickup pattern, sensitivity, self-noise, working distance, placement, voice, interface, and room. Filmgear Canada verifies the selected model rather than applying one rule to every room.

How do I record a two-person podcast?

Give each host a separate microphone path, such as two RODE PodMic microphones into an all-in-one console, and confirm that the selected console records separate tracks. Provide a monitoring path for each host, then add a camera and lighting plan that fits the room and operator.

Do I need an all-in-one podcast console?

A console such as the RODECaster Duo or RODECaster Pro II can reduce routing and monitoring complexity for a two-person or recurring show. The exact benefit depends on its verified microphone inputs, headphone outputs, isolated tracks, computer connection, storage, remote-guest path, backup options, and power.

Which wireless microphone should I choose for a video podcast?

Choose by speaker count, receiver type, camera or computer connection, monitoring, charging, internal or external recording, mounting, and included adapters. The DJI Mic 3 (1 TX + 1 RX) covers one speaker; the DJI Mic 3 2 TX + 1 RX Combo covers two. Read the Filmgear Canada guide DJI Mic 3 vs Mic Mini 2 vs Rode Wireless Pro: Which Wireless Mic in 2026?, then recheck the exact package before ordering.

Can I record two USB microphones into one computer?

Only after the exact microphones, computer, operating system, software, monitoring, and clocking workflow pass a compatibility test. Do not assume that two USB devices will appear as two stable isolated tracks; a console-based XLR path is the reliable route for two hosts.

Why does my podcast sound echoey?

The microphone may be too far from the speaker, the room may have strong reflections, or background noise may be entering the recording. Test placement and remove avoidable noise first. A noise-rejecting dynamic microphone at close working distance solves most of it. Room treatment and soundproofing sit outside what Filmgear Canada offers.

Why is my microphone too quiet or noisy?

Check speaking distance, microphone settings, gain, cable, adapter, power, console or computer input, and monitoring path. The fix depends on the exact product and signal chain.

Do I need a camera to start a podcast?

An audio-only podcast does not need a camera. A video podcast can start with one verified camera angle, confirmed through a Filmgear Canada consultation rather than a fixed pick on this page. Add another camera after the audio, media, power, synchronization, and operator workflow are stable.

Is one camera enough for a two-person video podcast?

One camera can provide a master two-shot when the room and framing allow it. A second camera can add close-ups or reactions, but it also adds media, power, support, synchronization, and operator work.

What lighting does a podcast studio need?

Start with one controlled key light that fits the room, ceiling, camera exposure, modifier, stand, power, and noise requirements, such as the Amaran Ace 25x for a desk or the Amaran F22C mat for a larger room. Add fill, edge, or background lighting only when the visual plan needs it.

How do I connect the microphone, console, computer, and camera?

Create a signal-flow diagram for the exact products. Confirm each connector, cable, power path, track destination, monitoring feed, camera feed, software setting, and backup recording before ordering.

How do I record a remote guest without echo?

The selected console or software needs a verified return-audio or mix-minus workflow so the guest does not hear a delayed copy of their own voice. Confirm the exact routing, computer connection, monitoring, and recording method.

What should I upgrade first?

Fix the weakest part of the current workflow. Start with microphone placement, monitoring, room noise, and recording reliability. Add another host position, camera, wireless path, livestream output, or permanent mounting only after the foundation works.

Can Filmgear Canada review my complete podcast kit?

Yes. Filmgear Canada is an authorized Canadian dealer with a Vancouver showroom, same-day pickup on in-stock items, Canada-wide shipping, and a 14-day return window on eligible items. Send the room, host count, recording format, current equipment, portability, camera count, and budget for a reviewed list.

---

Check the complete system before you order

• Every host has an approved microphone path.
• The recording device supports the required input and track count.
• Every host has the required monitoring path.
• Every connector, cable, adapter, and power requirement is listed.
• The computer, software, camera, console, and wireless receiver work together.
• Microphone arms fit the desk and support the selected microphones.
• Cameras have approved lenses, media, power, and support.
• Lights have approved modifiers, stands, ballast, power, and room clearance.
• The primary and backup recording destinations are defined.
• Current product availability and selected variants have been checked against live Shopify data.
• Same-day pickup, Canada-wide shipping, and the 14-day return window have been confirmed for the specific order.
• Room acoustics expectations are set: treatment and soundproofing are outside Filmgear Canada's offer.

Send Filmgear Canada the room, host count, show format, current equipment, and budget before placing a complex order. The review identifies missing parts, incompatible connections, and optional upgrades.

Request a Complete Podcast Kit Review