The Hollyland LARK M3 Transmitter is a 9 g clip-on wireless microphone for adding speakers to a LARK M3 system. One LARK M3 receiver connects up to four transmitters, so a two-person kit can grow into a four-person setup.

Product Video

Key Selling Points

Hollyland LARK M3 Transmitter weighs about 9 g
Hollyland LARK M3 quick actions: instant mute, triple-press recording, MFi certification and playback without unplugging
Hollyland LARK M3 AI noise cancellation levels
Hollyland LARK M3 mix-and-match setups with up to four transmitters and four receivers
  • 9 g clip-on transmitter with magnetic mounting
  • Adds a third or fourth speaker: one LARK M3 receiver connects up to four transmitters
  • AI noise cancellation in three levels (10, 15 and 20 dB) and its own vocal preset per transmitter
  • Onboard mute button; triple-press the button to start recording
  • About 8 hours per charge (4 to 4.5 hours with noise cancellation on), 300 m range

In the Box

  • 1x LARK M3 Transmitter (Space Gray)
  • 1x Magnet
  • 1x Furry Windshield

Transmitters charge in a LARK M3 charging case, which comes with LARK M3 Combo kits.

FAQ

Can I add a third or fourth transmitter to my LARK M3 kit?

Yes. One LARK M3 receiver connects to up to four transmitters, and transmitters can be added or removed during a shoot without stopping the audio already being captured. LARK M3 transmitters charge in a LARK M3 charging case. The case in the 2TX&2RX kit holds two transmitters, and Hollyland also makes a 4TX&2RX case.

Does each transmitter record on its own track?

Yes. LARK M3 supports four isolated tracks, one per transmitter. Hollyland lists two ways to capture them: with the hot shoe adapter, or by connecting the USB-C receiver or camera receiver to a computer with a USB-C cable and recording in compatible third-party software.

Is there a limiter on the transmitter?

Yes. Auto-Limit Clip Protection balances excessive volume to keep audio stable when a speaker suddenly gets louder. Each transmitter can also use its own noise cancellation level and vocal preset.

Specifications

Specification Hollyland LARK M3 Transmitter
Wireless transmission 2.4 GHz adaptive frequency hopping, QPSK 3 Mbps
Transmission range Up to 300 m (1,000 ft)
Polar pattern Omnidirectional
Sensitivity -37 dBV ±2 dBV @1 kHz, 94 dB SPL
Frequency response 20 Hz to 20 kHz
Signal-to-noise ratio ≥70 dB
Maximum SPL 125 dB SPL
Sample rate and bit depth 48 kHz/24-bit and 48 kHz/32-bit float (32-bit float output on Apple devices with third-party apps; Android up to 24-bit)
Battery 3.87 V, about 95 mAh
Operating time About 8 hours (4 to 4.5 hours with noise cancellation on)
Charging time About 1.5 hours
Dimensions About D26.5 x 10 mm
Weight About 9 g
Operating temperature -10 to 60 °C
UPC 191460010705

Compatible Accessories and Related Gear

Use it with the Hollyland LARK M3 Combo 2TX&2RX, or add a second camera with the LARK M3 Camera Receiver or another phone or computer with the LARK M3 USB-C Receiver.

Where to Buy in Canada

Build out a LARK M3 system with Filmgear Canada in Vancouver.

9 g clip-on transmitter with magnetic mounting

Adds a third or fourth speaker: one LARK M3 receiver connects up to four transmitters

AI noise cancellation in three levels (10, 15 and 20 dB) and its own vocal preset per transmitter

Onboard mute button; triple-press the button to start recording

About 8 hours per charge (4 to 4.5 hours with noise cancellation on), 300 m range
1x LARK M3 Transmitter (Space Gray)

1x Magnet

1x Furry Windshield

We have a 14-day return policy, which means you have 14 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase. For opened or used items, a minimum 15% restocking fee may apply depending on the item condition.

To start a return, you can contact us at info@filmgearcanada.com. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

You can always contact us for any return-related questions at info@filmgearcanada.com.

Important Notice for Special Order Items

Certain professional and project-based products are supplied on a Special Order basis and are subject to different return conditions. Please review the “Special Order Items” section below before placing your order.

Damages and Issues

Please inspect your order upon reception and contact us immediately if the item is defective, damaged, or if you receive the wrong item, so that we can evaluate the issue and make it right.

If an item is defective within 14 days of delivery, email info@filmgearcanada.com with a short video of the problem and the serial number, or bring it to our showroom. Once we confirm the defect, we’ll replace it (or refund it if a replacement isn’t available) and handle the manufacturer claim ourselves.

For Special Order items, damage or defect claims must be reported immediately upon delivery and will be handled in accordance with the manufacturer’s warranty terms.

Exceptions / Non-returnable Items

Special Order Items (Final Sale)
Certain professional, project-based products are supplied on a Special Order basis and are not regularly stocked. Special Order items are final sale and cannot be returned, exchanged, or refunded once the order has been confirmed with the manufacturer. Special Order items are final sale whether they ship from our stock or are ordered from the manufacturer.

These items are ordered specifically for individual projects and may include, but are not limited to:

  • Professional wireless communication systems
  • Large-scale lighting equipment
  • Studio carts and grip equipment
  • Cine lenses and special production gear

Please ensure compatibility and project requirements before placing your order. If you have any questions regarding lead time or suitability, we strongly recommend contacting us prior to purchase.

In addition, we do not accept returns for open box, demo or clearance items, gift cards, hazardous materials, flammable liquids or gases.

Exchanges

The fastest way to ensure you get what you want is to return the item you have. Once the return is accepted, you may place a new order for the desired item.

Refunds

We will notify you once we’ve received and inspected your return and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please note that it may take some time for your bank or credit card company to process and post the refund.

FAQ

Can I add a third or fourth transmitter to my LARK M3 kit?

Yes. One LARK M3 receiver connects to up to four transmitters, and transmitters can be added or removed during a shoot without stopping the audio already being captured. LARK M3 transmitters charge in a LARK M3 charging case. The case in the 2TX&2RX kit holds two transmitters, and Hollyland also makes a 4TX&2RX case.

Does each transmitter record on its own track?

Yes. LARK M3 supports four isolated tracks, one per transmitter. Hollyland lists two ways to capture them: with the hot shoe adapter, or by connecting the USB-C receiver or camera receiver to a computer with a USB-C cable and recording in compatible third-party software.

Is there a limiter on the transmitter?

Yes. Auto-Limit Clip Protection balances excessive volume to keep audio stable when a speaker suddenly gets louder. Each transmitter can also use its own noise cancellation level and vocal preset.